Used Gesan Dps 250 for sale (18,752)

Condition: good (used), Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: tank capacity approx. 40 liters -Filter: RT-Filter RMS-80 Bweliokahk Del H D Isl -Filter capacity: 80 l/min -Level indicator: -Dimensions total: 490/250/H565 mm -Weight: 23 kg

Condition: new, Year of construction: 2022, operating hours: 15 h, tire size: neu, front tire size: neu | 0%, rear tire size: neu | 0%, Tires (v):new, tires (h):new, operating hours:15_____demonstration model 150 operating hoursThe JMB-M-WK+ is an environmentally friendly weed and moss killer on a trailer that can also be used as a high-pressure cleaner. By using hot water technology, weeds and moss are effectively controlled without pesticides. Thanks to the "TC" system in the low-pressure range (= WK function), the machine delivers a constant water temperature of 99 °C on the surface. The machine can be used by 2 people at the same time. The cover must remain closed during operation. This extends the service life of the machine and reduces noise pollution (less than 85 dB). New and advanced: operating element with digital control and joystick function. PRODUCT FEATURES 12 hrs. Use Digital operation via joystick GreenBoiler heat exchanger High-quality material Modern design Radial piston high-pressure pump Stage 5 ready TC system High-tech heating system: 110 kW GreenBoiler for increased efficiency > 92 % Up to 18 % fuel savings Low CO2 emissions Low maintenance costs 110 kW GreenBoiler + 20 kW through heat exchanger = 130 kW heat output Radial high-pressure pump with 3 ceramic pistons and stainless steel valves 12 V voltage for the electrical control and burners Automatic regulation of the engine speed depending on useMaximum speed regulation depending on use of high pressure / "WK" function (weed control function) Automatic speed regulation of the engine speed after 30 s (idle position) Built-in water tank 450 l Infinitely variable pressure and flow regulation by means of speed control: Electronic pressure relief when gun is closed / P-Zero valve in accordance with standard EN 1829-1 and 2 Water softening system with fill level monitoring Automatic pre-heating TÜV approval for 100 km/h Accessories included:Simple stainless steel spray lance with high-pressure nozzle and swivel fitting (= 250 bar) 25 cm - Stainless steel weed lance with temperature sticker for weed control (Note: JMB-M-WK+ = 2 pieces) 50 cm - Weed lance made of stainless steel with temperature sticker for weed control High-pressure spray gun with swivel joint: great maneuverability Safety: heat-resistant gloves, storage location: Gondelsheim hall Bweljp Nz E Ueil H D Isl

Condition: excellent (used), Year of construction: 2016, Seydelmann AMR1800/250 mixer grinder with CO2. 1800 litre hopper with 250mm head. Beautiful condition. 2 units in stock, very high specification machines. New cost in excess of EUR 300,000 Belisifk Icol H D Iswl We also have many other (22) Seydelmann machines from the same factory, all bought at the same time. Please ask for details.

Condition: used, diameter 250 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m 1 pc. three-jaws chuck - diameter 250 mm bore 75 mm with flange plate for mounting on milling table 0320 Bwjlijt Ukt Iel H D Ijl

Condition: excellent (used), Chain hoists - DEMAG / STAHL - LIFTKET - 15 pieces: 1. Demag DKUN 20 - 4000 kg. 2. Demag DKUN 10 - 2000 kg. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Demag PK 1 N - 125 kg. 9. Demag DKUN 2 - 250 kg. 10. Demag PK 2 N - 500 kg. 11. Demag PKVUN 1 - 125 kg. Bwolil Hovv Idwo D Iol 12. Demag engine PKUN 1 - 125 / 250 kg. 13. Steel T 405 M - 1000 kg. 14. Steel T 302 S - 500 kg. 15. Liftket Star 021/51 - 500 kg.

Year of construction: 2004, Condition: good (used), machine/vehicle number: 2004-3-11A, - Manual feed of the milling unit - Work table height adjustable via hand wheel - horizontal and vertical material tension - Cutter diameter up to 250 mm - max milling height 150 mm - max milling depth 80 mm Bjlil Hef E Higs D Iewl - max milling length 305 mm - angle adjustable stop Li + Re 20 - 90 ° - milling spindle speed 4500 rpm - Drive 400 V 3.2 kW - Compressed air supply 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table underframe - Space requirement approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 6 pieces -Prism width: 100 mm -Dimensions: 6x 250/140/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 250/280/H190 mm Bwolilju T Tp Uj H D Iol -Total weight: 75.1 kg

Year of construction: 1997, Condition: used, - for window and door profiles made of aluminum and PVC - milling spindle length (mm) 90 - cutter diameter max (mm) 250 - milling depth up to (mm) 80 - Milling width (mm) 330 Bwjlil H Dslkfu Ue Iel

Condition: used, diameter 250 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m 1 pc. four jaw chuck - diameter 250 mm bore 75 mm KK 140 Bjliet Ukt Usl H D Iswl fastening: 4 pcs. screws M 16 / 170

Condition: used, Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... Bwelil H Dsin Hrqj Iol -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm -Weight: 10 kg

Condition: used, diameter 250 mm total power requirement kW weight of the machine ca. 0,05 t dimensions of the machine ca. m Bwolil H Dot Ukufe Ijl 1 pc. three jaws chuck - diameter 250 mm bore 80 mm fastening: 4 pcs screws 135

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower Bweljun Dvpeil H D Isl -Fan: Radial fan, unfortunately without type designation -Voltage: 220/380 V -Speed: 2830 rpm -technical data: see photo type plate -Fan wheel: Ø 200 x 70 mm -Connection input: Ø 68 mm -Connection output: Ø 50 mm -Dimensions: 295/250/H320mm -Weight: 9.1 kg

Condition: used, Fire extinguisher, fire hose box, fire hose box, fire extinguisher cabinet, fire extinguisher cabinet Bolettc Tgoil H D Iswl -Fire extinguisher cabinet: wall hydrant with hose reel -Fire hose: with pipe nozzle -Number: 2x fire extinguisher cabinet available -Price per piece -Dimensions: 1175/250/H850 mm -Weight: 55 kg/piece

Year of construction: 2000, Condition: used, Fire extinguisher, fire hose box, fire hose box, fire extinguisher cabinet, fire extinguisher cabinet -Fire extinguisher cabinet with fire alarm, foam extinguisher and wall hydrant with hose reel Bolettc Tcoil H D Iowl -Foam extinguisher: Gloria -Hose reel: Gesa pressure hose DN 25 length 30 m -Number: 1x fire extinguisher cabinet available -Dimensions: 1175/250/H920mm -Weight: approx. 100 kg

Condition: used, Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fasteners: Hanger screws fully assembled 900 pieces -Type: M10 x 300 240 pieces with adapter plate -Type: M10 x 250 440 pieces with adapter plate Bslil H Dsq Sbgds Iswl -Type: M10 x 200 420 pieces without adapter plate -Material: A2 stainless steel Quantity: Total 900 pieces -Price/tax: complete -Transport dimensions: 980/670/H550 mm -Weight: 246kg

Condition: used, fuel type: electric, Heavy-duty castors, heavy-duty wheel, tire, forklift drive wheel -Manufacturer: Gumasol heavy duty roller heavy duty wheel -Wheel size: 250/80-170 -Number: 5x wheel available -Price per piece -Weight: 5.1 kg/pc. Bjlekpwqboil H D Iewl

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 3 parts -Tool angle: 90° -Dimension: 39 x 250mm -Dimensions: see the drawing in the photos -Length: 1265 mm / each 1 x 500/400/365 mm Bwjlil H Dslcfh To Isl -Weight: 65 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm Bwelilsdxxrre H D Iel -Weight: 130 kg

Condition: used, Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Prisms: 90° Bslisfgwvyel H D Iewl -2x thread: M16 -Price: per piece -Number: 2 pieces -Dimensions: 250/40/H115 mm -Weight: 6.2 kg/piece

Condition: used, Clamping angle for workpiece clamping -Dimensions: W/H/L 250/775/245 mm -Thickness: 27 mm -Surface: milled -Thread holes: M16 -Number: 2x mounting brackets available -Price: per piece -Weight: 98.5 kg/piece Belil Hsdzd Hvj D Iewl

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp Bwjljfbg Rheil H D Ijl -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 45 x 433 mm -Weight: 1.3 kg/piece

Condition: used, Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm Bweliodkx S Tel H D Iol -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 63/63/H435 mm -Weight: 3.15 kg

Condition: used, Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements Bwelil Hedl U Ngs D Iol -Clamping angle: for workpiece clamping -Dimensions: 165/250/H127 mm -Wall thickness: 20 mm -Number: 1x angle available -Price: per piece -Weight: 12.4 kg/piece

Condition: used, T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table Bwelijcbqqxel H D Isl -Dimensions: 250/1450/H170 mm -Plate thickness: 28 mm -Plate is: with supporting ribs -1x T slot: 12 mm -1x: longitudinal groove -Weight: 156 kg

Condition: used, Pneumatic cylinder, air cylinder, standard cylinder Bslil H Docp H S No Iswl -Stroke: 250 mm -Piston diameter: mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Number: 2 pieces available -Piece price: 125 euros VAT. -Dimensions: 560/182/H160 mm -Weight: 9.5 kg