Used Tos Sn63C for sale (686)

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide Credpfxev Hzqxo Apnoc - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table Codoy Iwf Hopfx Apnerc - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: used, Year of construction: 1984, grinding diameter 630 mm grinding length 3000 mm workpiece weight 2500 kg grinding wheel diameter 750 mm voltage 400 V Crjdpeyyqhxsfx Apnjc Table Swivel 5° - 0° - 5° Internal Grinding Attachment Marposs Steadies Dresser Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC-Steuerung Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories Cedow Nmw Hopfx Apnorc - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Crsdpfxew Iu Nho Apnsc Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: repair required (used), Year of construction: 1979, Table 1,120 x 1,000mm, spindle 100mm ISO40, X 1,200 Y 900 Z 900. Needs electrical rebuilding. Cjdpfx Apjy R Uzqjnjrc

Condition: good (used), Year of construction: 1999, Ref. -No.: 10638 Manufacturer: TOS HULIN Type: SKA 12 CNC Year of construction: 1999 Type of control: CNC Control: Sinumerik 840 C Storage location: Halberstadt Country of origin: Czech Republic Turning Diameter: 1450 mm Csdpfxoy Ed Sue Apnorc Turning Height: 1450 mm Tool Taper: SK50 Power Capacity: 60 kW Planar disk: 630 RPM Planar disk: Ø 1250 mm Head Magazine: 30 academic subject Plate magazine: 24 academic subject Further information: - Hydraulically operated power chuck - Drive for rotary tools - Third controlled C-axis - Heidenhain linear scales in X and Z - Chip conveyor and extraction system - Renishaw for tool control The machine can be viewed under power by arrangement.

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 2,200 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 3,000 rpm, table load: 16,000 kg, number of axes: 5, This 5-axis TOS WHQ 13 CNC boring machine was manufactured in 2013. It features a working spindle diameter of 130 mm, a transverse table travel of 5000 mm, and a table load capacity of 16,000 kg. The machine is equipped with a HEIDENHAIN iTNC530 control system and includes an automatic tool change system. If you are looking to get high-quality boring capabilities, consider the TOS WHQ 13 CNC machine we have for sale. Contact us for further details. • Working spindle diameter: 130 mm Cjdpfjy D R D Isx Apnerc • Clamping: ISO 50 • Spindle extension (W): 800 mm • Table clamping surface: 2500 x 3000 mm • Control: HEIDENHAIN iTNC530 + handwheel • Motors and drives: SIEMENS • Scope of repair 2026: • Cleaning the machine • Checking and adjusting machine geometry • Checking machine functionality • Revision of electrical equipment • Revision of hydraulics and lubrication • Adjustment of clearances and optimization of drives • Replacement of guide surface wipers • Repair of telescopic machine cover • Replacement of balancing ropes • Repair of the platform • Revision of CHOV-K 20 bar cooling • Revision of automatic tool changer AVN60 • Machine with guarantee – please contact us for more information Additional equipment • CNC table – fully controlled B axis • CHOV-K 20 bar spindle axis cooling (emulsion / through-spindle coolant) • AVN60 automatic tool changer • CE platform and fence (guarding) • Chip conveyor

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,220 mm, number of axes: 5, This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1600 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. • Control system: NCT-104 Spindle • Spindle diameter: 130 mm • Taper: ISO 50 (7:24) • Spindle speed range: 10 – 1500 rpm • Max spindle torque: approx. 2350 Nm • Main motor power: 37 kW Axis Travels • X-axis travel: 3500 mm • Y-axis travel: 2000 mm • Z-axis travel: 1220 mm • W-axis (spindle quill travel): 570 mm Table • Rotary table size: 1600 x 1800 mm • Max workpiece weight: 12,000 kg • T-slots: 22 x 9 x 160 mm • B-axis table feed: 0.03 – 1.5 rpm Feed Rates • Rapid traverse (X / Y / Z / W): 2000 mm/min Crsdpfx Apox Imtaonjc Power • Total power requirement: approx. 80 – 83 kVA

Condition: ready for operation (used), Tos SN 55 B Conventional Lathe with Digital Readout and Safeties Swing diameter over bed: 540 mm Swing diameter over support: 300 mm Spindle bore: 75 mm Turning length: 1600 mm Dimensions: 360x150x180 cm (LxWxH) With feed on X and Z axis With steady rests With extra jaws With safety features With removable carriage section With coolant pump Csdpsylpqhefx Apnerc With Mitutoyo digital readout 380v Location: Budel, Netherlands Transport: negotiable upon request Call or email for more information. Also check out our other listings. We are looking for industrial machines throughout the year. Do you have machines available? Send us photos and information. The seller is not liable for any typographical or data transmission errors. The machine's appearance, technique, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: good (used), Tos Hostivar cylindrical grinding machine Type: 1U X-path: 900 mm bed: 900 x 140 mm Turning diameter bed: 260 mm Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Csdpfx Apjq H Ap Njnerc Dimensions: 150x105x140 cm LxWxH

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm y travel 1000 mm Cjdpfxoy Ez Elj Apnorc z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: good (used), functionality: fully functional, BUA 25/1000 Cjdpfowug A Ijx Apnjrc

Condition: good (used), Well used TOS TRENCIN SUI40-50. lathe Center width 1500 mm Rotation over machine bed 500 mm Rotation over support 320 mm Spindle speed 14 to 2240 rpm Csdpjrwd Hzefx Apnsrc Machine is operational and in good condition

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm Crjdpfx Asygxy Uspnec workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: not inspected (used), functionality: unexamined, We are offering this untested TOS Trenčín SUI 50 CNC centre lathe, year of manufacture unknown. Manufacturer: TOS Trenčín Model: SUI 50 CNC Condition: untested Category ID: 1519 Type ID: 2086 Machine type: Centre lathe (lead-screw/feed-screw lathe) The machine powers up and the display lights up without any error messages. The chuck can be engaged. Other than the emergency stop button on the machine (see photos), no defects are visible. Unfortunately, I have no experience with this machine and therefore cannot operate it. The machine was still in operation until early 2025. It comes from an insolvency auction and is now for sale. The tools currently installed in the machine will remain in it. A complete operating manual and circuit diagrams are available. Crjdpfsy Nml Eex Apnec The machine is still connected and can be inspected and tested on site. Transportation should ideally be arranged by the customer. Loading by overhead crane is possible. Securing the machine is the buyer’s responsibility. If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Clamping table area mm 250 x 1130 Working stroke: longitudinal mm 800 cross mm 350 vertical mm 450 Taper in spindle ISO 40 Codpfx Apjy Enumenorc Range of revolutions r.p.m. 45 - 4500 Number of revolutions steps 16 Main motor output kW 2,2/3,0 Total machine input kVA 4,0 Machine dimensions mm 2650 x 1980 x 2260 Machine weight kg 1760

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Crodpjufgb Isfx Apnsc

Year of construction: 2008, condition: ready for operation (used), travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: TNC426, spindle speed (max.): 3,500 rpm, table length: 850 mm, table load: 3,000 kg, table width: 850 mm, This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine. Machine Benefits Qualitative Machine Benefits • Precision control, very good condition Technical Machine Benefits • Diameter of the working spindle: 128 mm • Retrofitted in 2008 • Robust table design Extra Information Machine still under power // Machine was checked and refurbished in 2024: ■ cleaning, technical inspection of the machine ■ replacement of the Heidenhain TNC426 control system ■ complete inspection of the electrical cabinet ■ replacement of damaged cables ■ repair of the control panel Codpfx Aey Altuspnjrc ■ repair of the complete geometry of the machine (geometric accuracy protocol on request) ■ inspection of the drives (new bearings for the X+Z ball screw bearings) ■ inspection of the headstock ■ inspection of the hydraulic unit ■ inspection of lubrication and reinforcement ■ new telescopic covers

Year of construction: 1980, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 2,500 rpm, table length: 1,800 mm, table load: 12,000 kg, table width: 1,800 mm, number of axes: 4, This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits Crodpfx Apoy Althsnjc • Retrofitted in 2001 • Refurbished in 2024 • 6-month warranty on mechanical parts Technical Machine Benefits • Working spindle diameter: 130 mm • Clamping cone: 50 iso Extra Information Machine still under power / 6-month warranty on mechanical parts // Scope of refurbishment (2024): ■ Cleaning the machine ■ Checking and adjusting the machine geometry ■ Regrinding the spindle cone ■ ...possibility of replacing the spindle for an additional fee ■ Checking the machine's functionality ■ Revision of the electrical equipment ■ Revision of the hydraulics and lubrication ■ Adjustment of clearances and optimization of drives ■ Replacement of the guide surface wipers ■ Repair of the telescopic machine cover ■ Replacement of the balancing ropes ■ Repair of the platform ■ Revision of the cooling CHZ13

Condition: good (used), Year of construction: 1980, functionality: limited functionality, turning length: 1,950 mm, Machine is operational Technical Data – TOS Trenčín SN 63 B General Information Manufacturer: TOS Trenčín Model: SN 63 B Design: Conventional Lathe Origin: Czechoslovakia Machine Weight: approx. 2,940 kg Working Area Swing Over Bed: 630 mm Swing Over Cross Slide: approx. 350–380 mm Distance Between Centers: 1,000 / 1,500 / 2,000 mm (depending on version) 🔹 Spindle Spindle Bore: approx. 70–80 mm Cjdpeyxbzgjfx Apnjrc Spindle Mount: Camlock D1-8 Speed Range: approx. 12 – 2,000 rpm Number of Speed Steps: 18 – 24 steps 🔹 Feed & Thread Cutting Longitudinal Feed: 0.04 – 2.5 mm/rev Cross Feed: 0.02 – 1.25 mm/rev Thread Cutting: Metric threads Imperial threads Module threads DP threads Carriage & Tool Mount Cross Slide Travel: approx. 300 mm Top Slide Travel: approx. 120 mm Tool Holder: 4-way toolpost Drive Main Drive Power: approx. 7.5 kW (up to 11 kW possible) Mains Voltage: 380 V / 50 Hz Precision Working Accuracy: IT7 – IT8 Runout Accuracy: up to approx. 0.01 mm (depending on condition)

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. Csdeh U Rznepfx Apnorc MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: excellent (used), functionality: fully functional, Vertical lathe in excellent condition. Technical specifications: Machine weight: 54,000 kg Cedpfx Aey Rl D Aepnerc Total connected load: 83 kW Max. workpiece diameter: 2,600 mm Max. workpiece height: 1,600 mm Max. workpiece weight: 15,000 kg Chuck speed: 2,400 rpm

Condition: good (used), Year of construction: 1989, functionality: fully functional, Centre height: 250 mm Centre distance: 2000 mm Max. workpiece weight: 500 kg Cedpfxjy Nx H Ue Apnerc

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, TRACKED SINGLE-SHAFT MULTIBLADE SAWMILL TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Note: Fitted with new guides and a new chain (the replacement cost was quite significant – 36,000 PLN) TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Mounted blade: 400 mm - Maximum blade diameter: 450 mm - Blade bore diameter: 80 mm - Maximum cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top side: - Anti-kickback pawls - Slipper shaft - Anti-kickback pawls - Smooth slip roller - Hold-down - Shaft with bushing and nut - Hold-down - 2 slip/hold-down shafts Bottom side: - Roller before the table - Guide rail - Pawls - Track chain - Central track chain lubrication - Electric rise and fall for sawshaft - Electric body lift: 0.75 kW - Infinitely variable feed speed – new 2.2 kW inverter installed - Extraction port diameter: 280 mm - Main motor: 75 kW - Overall dimensions (L/W/H): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES Cedsy Nxdyopfx Apnjrc - Czech manufacture - Used multiblade saw - Overhead operator’s control panel - Full technical documentation (DTR) - Very good condition - We can provide a warranty for the equipment