Used Gesan Dvs 150 for sale (9,903)

Condition: used, Year of construction: 2007, functionality: fully functional, NAKAMURA Model WT-150 MMY, used, year 2007 CNC turning machine Fanuc 18 iTB control Swinging diameter above the guide: 190 mm Max. turning diameter/turning length: 190 mm / 400 mm Bar capacity: 51 mm Main spindle 15/11 kW, max. speed 5,000 rpm Counter spindle 11/7.5 kW, max. speed 5,000 rpm Spindle nose: A2-5 Draw tube diameter: 52 mm (L/R) Spindle bore: 63 mm (L/R) C-axis incremental input: 0.001 degrees 2 x 12-station turrets, all stations powered 24-station indexing Nledpfxjzqdpnj Alfjf Tool holder dimensions, outer/inner: 20mm/25mm/32mm Speed of rotating tools: 60 – 6,000 min-1 Y-axis +/- 35 mm on the upper turret Travel X1/X2-axis: 167.5 mm Travel Z1/Z2-axis: 465 mm Rapid traverse X1/X2-axis: 16 m/min Rapid traverse Z1/Z2-axis: 40 m/min Chip conveyor type A, left Finished part discharge type G, right Coolant system Chip conveyor CE marking Equipment: Spindles, clamping devices & bar capacity Main spindle option: bar capacity 65 mm (left) at max. 4,500 rpm Draw tube adapter M74x1.5 to A-6 and M58x1.5 to A-5 (with coolant hole) Chuck air blow-out, outer left Coolant and air blow-out through the right spindle Axes, control & software options Y-axis (+/- 35 mm) on the upper turret Helical interpolation (thread milling) Polygon turning function (without holder) Intelligent handwheel 5 pairs of free M-functions (M-codes) Software: NC-Praktiker 2000 for Windows (DIN-ISO programming system) Automation & part discharge Finished part unloader: Type G WT 150 (L=150" mm", ∅65" mm") Profile timing belt for part gripper G (WT 150, ∅65" mm") Collection tray A ∅65 mm for material scrap discharge Coolant, filtration technology & chip disposal Chip conveyor: Hinged belt conveyor Knoll (Type 200 S-1) incl. interface Cyclone filter system: HA 180-4 incl. 2 coolant pumps Preparation for Brinkmann pumps Submersible pump TAL 401/140 51Y with TAL401 adapter plate

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, ENGEL VC 1050/150Tech Screw: Ø 50 mm CLAMPING UNIT Clamping force: 1500 kN Opening stroke: 607 mm Ejector stroke: 150 mm Ejector force: 61 kN DRIVE Pump drive power: 30 kW INJECTION UNIT 1 Screw diameter: 50 mm Max swept volume: 422 cm³ Screw speed max: 250 r/min Screw speed current: 250 r/min Injection rate: 210 cm³/s Nedey Rn E Aspfx Alfolf Injection rate incr.: 165 cm³/s Spec. inj. pressure: 1955 bar Spec. inj. pressure+: 2332 bar Nozzle stroke: 350 mm Nozzle cont. pressure: 67.2 kN

Condition: used, Year of construction: 2003, clamping force: 1,500 kN, Equipment: documentation/manual, Injection Moulding Machine KM 150-700/C2 Clamping Unit 1. Clamping force: 1500 kN 2. Platen size (h × v): 780 × 790 mm 3. Tool opening stroke: 600 mm 4. Clearance between tie bars (h × v): 500 × 500 mm 5. Minimum mould installation height: 300 mm Nljdpoyfm Ahsfx Alfef 6. Ejector stroke: 150 mm 7. Hot runner – number of zones used: 12 8. Control of pneumatic valve pins: 1 pc Injection Unit 1. Screw diameter: 45 mm 2. Injection pressure: 2336 bar 3. Maximum shot volume: 305 cm³ 4. Maximum shot weight (PS): 278 g 5. Cores: 2× hydraulic circuit (BAP) 6. Screw L/D ratio: 22

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Mould height min-max: 200-550mm Type: Horizontal Drive: Hydraulic • Screw diameter: 25 mm • L/D ratio: 17.5 • Max screw stroke: 90 mm • Theoretical shot volume: 44 cm³ • PS shot weight (theoretical): ≈ 40 g • Max injection pressure: up to 2500 bar • Max plasticizing rate (PS): ~6.5 kg/h • Screw torque: up to ~210 Nm Nljdpfoxl Hpgsx Alfsf • Heating capacity: ~11 kW

Condition: excellent (used), Year of construction: 2002, Arburg 320S 350-150 (2002) Nlsdpewmqx Refx Alfef Clamping force: 35 ton Plate size: 455x455 mm Tie bar distance: 320x320 mm Min-Max daylight : 575 mm Screw dia: 30mm (up to 30%glass resistant)

Condition: new, functionality: fully functional, machine/vehicle number: NEW-11, empty load weight: 579 kg, maximum load weight: 2,121 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 276 150 2700 2, Rear tipper, electric operation NEW VEHICLE Internal dimensions: 276cm x 150cm Side panel height: 30cm Loading platform height: 67cm Total weight: 2700Kg Payload: 2121Kg Braked tandem axle trailer Overrun brake and handbrake from KNOTT 2x 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Electric tipping operation 12V 95Ah AGM battery Plug + socket for charging Aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on the plywood floor Automatic jockey wheel with 400Kg support load 6 noise-reducing lashing eyes with 800Kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber Large tipping angle of 48 degrees backwards OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (Powder-coated side panels and rims in black) -Ramps -U-profile for attaching the original SARIS ramp -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work when the vehicle is tilted -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tensioning latch -Flat cover with or without bows -High cover 160cm or 180cm Further accessories on request! Plus freight to Gera and vehicle registration document 200 € net Pictures are examples and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Specialist for axle repairs, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh Nljdszu Sa Nopfx Alfjf In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Nljdpeyxrt Tefx Alfof

Condition: used, mileage: 1 km, power: 186 kW (252.89 HP), first registration: 11/2001, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total length: 7,050 mm, total width: 2,500 mm, Year of construction: 2001, = Additional options and accessories = - PTO = More information = Front axle: Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Tyre profile left: 50%; Tyre profile right: 50% Number of cylinders: 6 Empty weight: 9.720 kg Carrying capacity: 8.880 kg GVW: 18.600 kg Price: On request Registration number: BL-NV-53 = Dealer information = Nodpfx Alszucnqofjlf We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, mileage: 1,001 km, first registration: 01/2016, empty load weight: 235 kg, color: red, driver cabin: other, gearing type: other, Year of construction: 2016, load capacity: 3,000 kg, Vehicle location: Bovenden. Capacity: 150 liters, overall width: 325 mm, load capacity: 3000 kg, weight approx. 235 kg! Nlodpszuvw Eefx Alfsf New, from stock. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Nedpfx Aegrzh Eelfslf Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: good (used), Year of construction: 1994, Oscillation ja ja / nein ja ja/nein ja ja/nein Njdpfx Aezfqkzolfslf tiltable up to 30 Grad Motor output 2,8 kW Table dimensions 850 x 300 mm sanding width 150 mm Weight 330 kg

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Nljdpfsv S Synex Alfjf Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, product height (max.): 450 mm, product height (min.): 90 mm, product length (min.): 230 mm, product length (max.): 800 mm, product width (max.): 500 mm, product width (min.): 120 mm, Equipment: documentation/manual, The production line is a complete system suitable for packaging all types of AFH tissue paper products. The line begins with a conveyor belt which serves as a buffer. The end of the conveyor belt can be lowered, enabling the machine to handle all types of hand towels. Following the conveyor belt is an Italian-made MAC DUE stacker, which is capable of stacking toilet roll in 1, 2 or 3 layers. This is followed by another conveyor belt, which connects the stacker to the packaging machine. Next comes the CB 150A universal, fully automatic packaging machine, designed in Italy for packaging AfH tissue products. The packaging machine is highly flexible, easy to set up and operates automatically. The maximum packaging speed is 5 packs per minute. Following the packaging machine is a shrink tunnel, which is integrated into the packaging machine. The MAC DUE HMI is a new DELTA model. The CB 050A packaging machine’s PLC (OMRON) comes with a new program; the electrical cabinet was rewired in 2022, and a diagram of this has also been drawn up, which I will provide with the machine. This packaging machine’s HMI is also a new Delta model. I will provide the source programs for both the HMI and the PLC with the machine. Njdpszvym Tsfx Alfslf The production line was dismantled on 12 July 2026 due to the purchase of a new machine. The machine is packed and in storage, ready for delivery at any time. Commissioning can be arranged on request, but it is straightforward to install and I can also provide online support. Numerous videos have been made of the machine.

Condition: used, Baumüller frequency inverter 55-88 kW, BUM63A-150- removed from Krauss Maffei KM 18 C3 - removed from running machine - fully functionalmanufacturer: Baumüller Nuremberg type: BUM63A-150 spare part no.: 6443081 manufacturer no.: 345449 Dition: gebraucht Nedpfx Aoltrpzslfolf

Condition: reconditioned (used), Year of construction: 2016, Technical specifications: Product number V-VC 150 Year of manufacture 2016 Engine power 3 kW Nlodezvrniepfx Alfef Capacity 150 m3/h Maximum vacuum 1.1 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 90 kg Dimensions [h x l x w] 7011 x 281 x 310 mm The pump achieves a vacuum of 1.1 mbar, as confirmed by the measurement on the sensor in the video attached below. After oil service New oil New exhaust separators Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and its dependence on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2014, Technical specifications: Product number VWP 1500 Nodpszvrg Eefx Alfelf Year of manufacture 2014 Capacity 1000 m3/h Maximum vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a complete overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: used, Year of construction: 2024, functionality: fully functional, empty load weight: 475 kg, construction width: 1,850 mm, sweeping width: 1,500 mm, Sweeping Machine Condition: As new Technical Condition: Very good Description: - Demonstration unit - Working width: 150 cm, Drive type: hydraulic, high-performance external hydraulic motor on the left / Hydraulic emptying with shut-off valve for sweeping use (no disassembly of the dirt collection container required) / Mounting via fork-tine attachment: tine cross-section 150x60 mm / Lateral adjustment of the sweeping machine is mechanical / 3rd support wheel for even ground tracking, long version / Swivel castors for normal use Ø 200x50 mm / Sweeping machine painted RAL 2004 (pure orange) / Attachment components painted RAL 7016 (anthracite grey) / Required hydraulic control circuits on carrier vehicle: 1x double-acting / incl. attachment with coupling, dirt collection container Njdpfx Alsy N H Nwefslf

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 09/2027, year of last overhaul: 2026, total width: 1,200 mm, total height: 1,300 mm, input frequency: 50 Hz, empty load weight: 2,000 kg, overall weight: 2,000 kg, type of input current: three-phase, electrical fuse: 63 A, TOP Spiral Mixer Kemper SP 150 AL with 2 mixing bowls Mixer for a maximum of 250 kg of dough Dough machine with cover with 2 timer switches and 2 speeds Connection 400V, 63A-CEE plug Dimensions: 1200 x 1550 x 1300/2000 mm, WxDxH Used machine, refurbished with warranty + service package Quality from a specialist company! Benefit from over 35 years of experience! Nljdpfjw S Sncsx Alfef Option: Delivery service additional mixing bowls maintenance contract Experience our world of bakery machines!

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Nedewkih Eopfx Alfslf

Year of construction: 2006, condition: ready for operation (used), A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible. Njdpfxswqqwbo Alfolf

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Nodpfx Alsum U S Eofjlf

Year of construction: 2004, condition: ready for operation (used), A Grieser pilot plant vacuum dissolver for highly viscous liquids is available. Volume: 150l, dissolver output: 22kW, vacuum pump output: 2.2kW, toothed disk diameter: 250mm, toothed disk speed: 1800rpm. Including hydraulic unit for the lifting column, hopper, sight glass with lamp, product temperature sensor, explosion-proof design and switch cabinet with inert gas flushing. Documentation available. On-site inspection is possible. Nedpfjucw Tpsx Alfslf

Condition: ready for operation (used), Year of construction: 2015, A Neopost inserting machine is available. Inserting capacity: 4500 letters/h, inserting capacity with 2 sheets (collected): 3400 letters/h, envelope feeder capacity: 400, inserting liquid tank: 1, document feeder capacity: 500 sheets. Envelope thickness: 4mm, min. document dimensions X/Y: 76mm/140mm, max. document dimensions X/Y: 228mm/406mm, min. envelope dimensions X/Y: 89mm/152mm, max. envelope dimensions X/Y: 165mm/264mm. Fold types: Spiral fold/Z-fold/single fold/double fold/parallel fold/non-fold. Machine dimensions X/Y/Z: approx. 3600mm/550mm/600mm, weight: approx. 400kg. Including the underframe (piece of furniture - green). Documentation available. On-site inspection is possible. Expected to be available from mid-May 2025. Nodpfx Asv N I Ayelfelf

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Njdpfxoyxgr Rs Alfslf

Year of construction: 1998, condition: ready for operation (used), Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible. Nljdpow Hthzefx Alfsf