Used Gesan Dv 130 for sale (20,094)

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, total height: 7,509 mm, total width: 9,380 mm, total length: 2,330 mm, load capacity per storage section: 300 kg, payload: 180,000 kg, type of input current: three-phase, input voltage: 400 V, table height: 890 mm, net weight: 16,371 kg, nominal voltage: 400 V, input frequency: 50 Hz, Equipment: safety light barrier, - Multi-Space consisting of 6 coupled lift units, 5 removal points at a height of 890 mm, one unit with maintenance flap - with 19-way optoelectronic identification system for filling material height measurement, when using containers with 37.5 mm intermediate grid, detection of filling material from a diameter of 5 mm, must not be transparent. Overhang control at the front and rear, provided that the overhanging stored goods interrupt one of the light barriers in the storage area - Energy-efficient, glare-free lighting of the removal points, LED technology with plexiglass cover - Equipment for emergency operation - Lean-Lift EcoDrive with integrated feedback unit - Keyboards on top of the universal arm, each mounted right below the lighting panel at all removal points - High-speed doors for removal opening - Container weighing device at the removal points - 899 storage profiles, storage notches every 75mm - Container load: 300kg with even load distribution - Device load: 12x15,000kg = 180 t Duolq Dbsv Hna Hok Aot - incl. 100 containers 1300x635x57mm, galvanized - Microprocessor control MP 12N-H-TFT, host communication via TCP/IP, TFT color display 800x600 - USB connection for barcode reader, Ethernet 100Mbit connection - Safety light curtain at all outlets - Drive: 400V three-phase current, 50Hz, 5.0KW, 100% duty cycle, lift 18KW, horizontal drive 1/2/3 with 0.37/0.55/0.37KW, fuse 50 A slow-blow, supply line 5x10mm², separate protective conductor 2.5mm², for connection to TN network (L1/L2/L3/N/PE) according to IEC-60364-1

Condition: new, Year of construction: 2025, Functionality: fully functional, total length: 13,000 mm, total width: 270 mm, warranty duration: 24 months, input voltage: 380 V, input frequency: 50 Hz, Equipment: cooling unit, GS13027 Ultra-Large Format Single-Platform Sheet Cutting Machine Smooth and delicate cutting section, burr-free Dslq Dbev Hnpzsk Asut Equipped with bevel cutting head and system High-quality modular drag chain cables Beam safety light curtain Fully automatic grease injection system

Condition: as good as new (ex-display), Year of construction: 2018, Functionality: fully functional, Roller glue applicator FIN SC2R-1300 Duolovy Sxyjq Dbk Ajt Working width 1300mm Working height 120mm Manual adjustment of the roller spacing Roller diameter 185mm Year of manufacture 2018 Machine has never worked CE certificate Power 0.37kw Weight 360kg

Condition: reconditioned (used), Year of construction: 2019, Functionality: fully functional, operating pressure: 350 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 160 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 13/35-4 CAGE 2019 year of production The device has new accessories, including a pressure gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Delq Dbsv N Hlmek Aout Thanks to the operating parameters of 350bar and 1300l / h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Voltage [Ph / V / Hz]: 3 / 400 / 50 Pumping capacity [l / h]: 500 - 1300 Inlet water temperature [°C]: max 60 Working pressure [bar]: 100 – 350 Connection power [kW] 15 Weight with accessories [kg] 160 Dimensions (length × width × height) [mm]: 930 × 800 × 920 EQUIPMENT: NEW durable 500bar pressure gun NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 15m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: used, power capacity 28 Nm Dolevt Edpsq Dbk Aeut volt 0 V weight of the machine ca. 49 kg

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Djlqjd Nt N He Dbk Asut Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 3 / 12 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0) Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513 Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels) No. 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Rough Trimming unit 08.055 (2 x kW 1,0) Copying unit by N.C (fine and contour trimming) SKF-L (2 x kW 0,18) +(2 x kW 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.617-2 ( 2 x kW 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270° OPTIONAL: Panels in-feed system 65.152 (Sliding table, mm 500 x 500) Panels Return System "GELDMEIER" Mod. ? (code Z02009)

Condition: new, Year of construction: 2023, Weinbrenner Type WPB 13036 Manufacture year 2023 Druk 36 t Buiglengte 1300 mm IJlgang 150 mm/sec Buigsnelheid 10 mm/sec, (20 mm/sec mogelijk met robot) Retoursnelheid 150 mm/sec Slag 150 mm Dujlqsr Drcuj Dbk Aet Uitlating 400 mm Motorvermogen 2x 5,5 kw Machinegewicht 4.350 kg Accessoires: Offline software T-profiel 2 stuks steunarmen 1 set boven- en ondergereedschap Amada gereedschapshouder Laserveilige Fissler Delem 66T-besturing 4 assen CNC-gestuurd: Y1, Y2, X, R 2 stabiele steunarmen Ook andere model verkrijgbaar/ op voorraad

Condition: excellent (used), Year of construction: 2002, Hydraulic press brake Manufacturer TRUMPF Type. TrumaBend V85 Year of manufacture 2002 Technical data Make: Trumpf Type: TrumaBend V85 Year of manufacture: 2002 Pressing force: 85 t Bending length: 2050 mm Stand clearance: 1750 mm Working height: 1050 mm Stroke: 365 mm Dimensions: approx. L 2.7 x W 2.1 x H 2.90 m Dujlqjvt Tlhj Dbk Ast Weight: approx. 9.05 t Equipment • Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 • Control: Delem DA 2D graphics • Lasersafe light barrier • Pneumatic die displacement • Hydraulic tool clamping top + bottom • CNC-controlled crowning • Technical documentation All information without Guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, mileage: 136,470 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 2,930 mm, first registration: 01/2019, fuel tank capacity: 80 l, emission class: euro6, color: blue, number of seats: 3, number of previous owners: 2, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Jan 2018 - Jul 2019 Cab: single Technical information Torque: 385 Nm Number of cylinders: 4 Engine capacity: 1.997 cc Dujlq Dbevuzu Hek Aet Transmission: 6 gears, Automatic Measures length/height: L1H1 Dimensions (LxBxH): 512 x 203 x 197 cm Weights Empty weight: 2.031 kg Carrying capacity: 769 kg GVW: 2.800 kg Interior Interior: black Environment CO2 emission: 182 g/km Consumption Average fuel consumption: 7 l/100km (40 MPG) Urban fuel consumption: 7,6 l/100km (37 MPG) Extra urban fuel consumption: 6,6 l/100km (43 MPG) Maintenance, history and condition Service history: Present APK (MOT): New APK (MOT) upon delivery Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options

Condition: good (used), mileage: 782,543 km, first registration: 02/1992, fuel type: diesel, color: black, axle configuration: 4x2, tire size: 315/80R22.5, fuel: diesel, wheelbase: 3,600 mm, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, Year of construction: 1992, Equipment: sleeping cabin, = More options and accessories = - Aluminium fuel tank - Leaf spring suspension - Air suspension - Sleeping cabin - Sunshade = Remarks = Volvo F16.500 Globetrotter 4x2 - Fully renovated - Volvo Demo colors - New paint - Perfect shape MY: 28-02-1992 KM: 782543 YV2H3A6A8NA369308 76-BTB-7 Volvo in perfect condition New paint - Demo colors from Volvo Interior like new Air suspension 3.60 wheelbase Telma retarder Cruise Control Double bed Eletric windows Air horn Extra lights Visit our website for all photo's and info: = More information = Technical information Number of cylinders: 6 Engine displacement: 16,115 cc Transmission: Volvo, manual transmission Front axle: Tire size: 315/80R22.5; Max. axle load: 7500 kg; Tire profile left: 70%; Tire profile right: 70%; Suspension: leaf spring Rear axle: Tire size: 295/80R22.5; Twin tires; Max. axle load: 11500 kg; Tire profile left inside: 70%; Tire profile left outside: 70%; Tire profile right inside: 70%; Tire profile right outside: 70%; Suspension: air suspension Dimensions Dimensions (L x W): 590 x 255 cm Weights Empty weight: 8,000 kg Djlq Dbkjuxyc Is Aeut Payload: 11,000 kg GVW: 19,000 kg Functional Brand of body: Volvo Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Identification License plate: 76-BTB-7

Condition: used, power capacity 10,4 Nm volt 0 V ampere 12,1 A Delq Dbkovtr Syo Aeut weight of the machine ca. 22 kg

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Duolq Dbeflc Uhek Ajt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: used, Year of construction: 1999, pressure 130 t stroke 21-120 mm number of strokes - loaded 35-80 ram surface 740 x 540 mm table surface area 1200 x 700 mm Dujlsvuh Sreq Dbk Ast

Year of construction: 1994, Condition: ready for operation (used), A Rackermann double-spindle milling machine (horizontal and vertical) is available. Travel X/Y/Z: 1000mm/370mm/450mm, table dimensions X/Y: 1300mm/400mm. Horizontal: Tool holder: SK40, max. tool diameter: 250mm, milling spindle swivel range: +/-90°, quill adjustment: 120mm, spindle diameter: 60mm, speed: 2100rpm. Vertical: Tool holder: SK40, max. tool diameter: 280mm, spindle diameter: 90mm, speed: 1400rpm. Feed X/Y/Z: 4m/min, feed force X/Y/Z: 10kN/10kN/30kN, rapid traverse X/Y/Z: 5m/min. Machine dimensions X/Y/Z: approx. 5500mm/4100mm/2500mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Dslq Djv Hrfmsbk Aout

Condition: excellent (used), Year of construction: 2000, pressing force: 85 t, Hydraulic press brake Manufacturer TRUMPF Type. TrumaBend V85 Year of manufacture 2000 Technical data Make: Trumpf Type: TrumaBend V85 Year of manufacture: 2000 Pressing force: 85 t Bending length: 2050 mm Stand clearance: 1750 mm Deljvtzr Aeq Dbk Ajut Thrust: 410 mm Table width: 120 mm Working height: 1050 mm Stroke: 215 mm Dimensions: approx. L 2.5 x W 2.2 x H 2.40 m Weight: approx. 8 t Equipment • Control: Delem DA 2D graphics • 2 movable support arms • Pneumatic die displacement • Hydraulic tool clamping top + bottom • CNC controlled crowning • Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, power capacity 28 Nm volt 0 V Dujlqsvtr Sgj Dbk Ast weight of the machine ca. 49 kg

Condition: excellent (used), LOADER (SINGLE-CAGE) Vacuum system with its pump Top holding bar deplacement (pivoting) of 180° Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting In-side lifting table, surface with motorized-rollers Front-side sliding door (metal grid) to introduce the stack of the panels Duolq Dbkod Tywgs Ajt Separated electric and command panel Outside rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), Working capacity (cycles/min): 12-15 Min/Max panels thickness mm 10 - 40 Min dimensions of the panels mm 250 x 320 (estimated) Max dimensions of the panels mm 1200 x 3000 Total installed motor power KW 11

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Loader (Bridge Frame) "RBO" Double Station, Mod. Advantage C B) Motorized Roller table "RBO" with turning device 90° (length to crosswise) C) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 Centre A: No. 2 Electro-spindles ISO 30 (Kw 3,7 each) with tool-holder magazine with 3 places each. Centre B: No. 2 predispositions for the installation of other 2 electro-spindles No. 2 tool-holder magazines (revolver) with 56 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Connection transfer, with upsidedown turning machine (180°) "RBO" Mod. Ribaltatore E) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units(1 left+1 right)with 4 BH18 heads with 18 spindles(36 right + 36 left),total 72 Centre A: No. 2 Electro-spindles ISO 30 (Kw 4,5 each) with 3 tool-holder magazine each. Centre B: No. 2 predispositions to install another 2 electro-spindles No. 2 tool-holder magazines (chain) with 60 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit No.2 horizontal units(1 right+1 left)with 5 insertion nozzles each (5 left + 5 right), tot. 10 nozzles G) Stacker (Bridge Frame) "RBO" Double Station, Mod. Advantage SC Delqogvdkgs Dbk Aeut

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 Duolq Dbed Tyvxsk Aot - Total installed motor power KW 11

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader Dolscggy Ssq Dbk Aeut - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Duelqjfi Tg Ho Dbk Aet Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Dolq Dod Nuu Hobk Asut Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) servo Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: excellent (used), LINE (half line) of Double-side Sizing-Milling & Edge Banding, with automatic handling system. Composed of the following machines: A) LOADER (Portal) with double station "RBO" Mod. Advantage C 3200 and central motorized rollers table. Duolq Dbshvah Nek Ajt B) Infeeding Rollerway, with double-cone TURNING Device "RBO" Mod. GPK-1 C) Double-side SIZING and EDGE BANDING machine "BIESSE" Mod. Stream SB2 11.0 D) UPSIDE DOWN 180° TURNING MACHINE "RBO" Mod. Ribaltatore E) Outfeeding Rollerway, with double-cone TURNING Device "RBO" Mod. GPK-2 F) STACKER (Portal) with double station "RBO" Mod. Advantage SC 3200, with central motorized rollers table.

Condition: excellent (used), Roller PAINTING and FINISHING LINE (UV), max. working width mm 1300. Composed by: 01) cod. J05012) Sanding Machine "COSTA LEVIGATRICI" Mod. SN TR LFT 3 TT 1350 Dolq Dbehyty Ajk Aout 02) code Y11034) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 03) cod. Y11036) UV oven (1 lamp) "CEFLA" Mod. UV 2000 M1 - TT 2000 04) code Y11037) Roller Coater"SORBINI by CEFLA" Mod. SMARTCOATER M-1 AN 05) cod. Y11041) UV oven (2 lamps) "CEFLA" Mod. UV-R M20 06) code Y11061) Sanding Machine "COSTA LEVIGATRICI" Mod. SH3 TR TTTTR 1350 07) code Y11042) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 08) code Y11039) UV oven (2 lamps) "CEFLA" Mod. UV-R M2 09) code Y11035) Roller Coater "BURKLE" Mod. RCL-M 1300 (e.a.s.y. Coater) 10) code Y11043) UV oven (3 lamps) "CEFLA" Mod. UV-R M3

Condition: refurbished (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3,0 - 12,0 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Feeding speed (fixed) m/min 16 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x kW 3,0) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Dujlqsdfgfpe Dbk Ast Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Fine Trimming unit 08.055 (2 x kW 1) - 30° Multi Function Unit (Profile contour Trimming unit) 08.346 (2 x kW 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 (2 x kW 0,25) Free space