Used Floorpul Ruby 45 for sale (9,388)

Condition: used, functionality: fully functional, machine/vehicle number: 8892, Year of construction: 2015, operating hours: 6,480 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,100 mm, fork length: 1,200 mm, empty load weight: 8,260 kg, total length: 4,400 mm, drive type: Diesel, construction width: 1,950 mm, Sideload forklift Chassis number: 8892 Load center: 600 Fork width: 200 mm Fork thickness: 50 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Speed class: 20 Lsdpfx Asx Ekyrsphort Condition: Refurbished with warranty Technical condition: good Front tire type: Pneumatic Front tire size: 250-15 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 250-15 Rear tire condition: 40 - 60% Heating, full cabin,

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Lodpfx Apezw H Hishort Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: used, functionality: fully functional, Year of construction: 2006, Articulating Telescopic Work Platform Genie Z45/25J * Working height: 15.8 m * Platform height: 13.8 m Lsdpfx Asyqqabsphert * Lateral outreach: 7.6 m *integrated charger * Overall dimensions (L x W x H): 6,600 x 1,800 x 1,900 mm * Weight: 7,402 kg * Basket load capacity: 227 kg * Rotating basket, hydraulic jib 1,400 * Basket dimensions (L x W x H): 1,750 x 700 x 1,100 mm * Basket and ground controls

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Stand in galvanized Lrjdpfx Apsz Dwhzohet - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 250 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1280,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw Extensive equipment Lrsdezxc D Hepfx Aphst 320cm sliding table, Two-way tilting (+46 to -46 degrees) with motorized adjustment, Motorized up-and-down adjustment of the saw blade, Right-hand rip fence with motorized adjustment up to 1370mm, 2-axis scoring saw with electric adjustment 5.5KW main motor, speed controlled by a frequency inverter, Max. blade diameter 450mm, Electronic display on the rip fence and sliding table, DIGIT-L Year of manufacture: 2023 Very good condition, barely differs from a new machine.

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Ljdpjz Eh Nrjfx Aphjrt Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 450 mm, JUKI PS-800HB8045ZNZ Heavy-Duty Programmable CNC Pattern Sewing Machine The machine is fully operational, regularly serviced, and ready for immediate use. It can be inspected and tested under power before purchase at our production facility in Gdańsk, Poland. Technical specifications: * Sewing area: 800 × 450 mm * Heavy-duty version for processing heavier materials * Automatic thread trimming * Programmable pattern sewing * Control panel for pattern programming * USB pattern import * High sewing accuracy and repeatability Additional equipment included: * Bobbin thread end sensor * Dedicated sewing cassette/fixture for MOLLE applications * Dedicated sewing cassette/fixture for mesh Typical applications: * Tactical equipment * MOLLE systems * Webbing and straps * Technical textiles * Industrial textile products * Filters * Mesh materials * Other repetitive programmable sewing operations Lsdpfxoz Dk Eys Aphjrt Machine information: * Manufacturer: JUKI * Model: PS-800HB8045ZNZ * Year of manufacture: 2025 * Approx. operating hours: 200 h * Condition: like new * Fully operational * Available immediately The machine is sold with a VAT invoice. Additional photos and a video of the machine in operation are available upon request. Location: Gdańsk, Poland. Loading assistance can be provided.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: AA1/015841, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 6,050 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of slots in tool magazine: 12, total length: 7,250 mm, total width: 2,420 mm, overall weight: 4,800 kg, table length: 6,050 mm, table width: 1,240 mm, Equipment: CE marking, SCM RECORD 100 AL XL CNC machining center, manufactured in 2006. A machine from the renowned Italian manufacturer, SCM Group, designed for professional processing of wood, MDF, plywood, chipboard, and other wood-based materials. Model: RECORD 100 AL XL Year of manufacture: 2006 Weight: 4800 kg Power supply: 400 V / 3 phases / 50–60 Hz Rated current: 62 A Technical specifications Working area / axes: X-axis: 6050 mm Y-axis: 1240 mm Z-axis: 200 mm Rapid traverse X: 60 m/min Rapid traverse Y: 45 m/min Rapid traverse Z: 30 m/min Electrospindle: manufacturer: SCM power: 8.5 kW maximum speed: 24,000 rpm tool holder: HSK-F63 automatic tool changer automatic magazine: 12 HSK-F63 tools Drilling unit: 7 vertical spindles 5 horizontal/angled spindles capability for vertical and side drilling Vacuum system: 2 × Becker VTLF 250 vacuum pump performance of one pump: 248 m³/h at 50 Hz total rated performance: 496 m³/h power of one pump: 5 kW vacuum: 200 mbar Other equipment Ledpozynkhsfx Aphert manual manipulator for machine operation table with vacuum clamping system capability for processing parts with a length of over 6 meters central chip extraction system from the machining head brush guard for the machining head safety mats complete enclosure of the working area CE marking The machine has a large working area of 6050 × 1240 mm, making it suitable for both standard panels and the processing of very long parts. The powerful 8.5 kW / 24,000 rpm / HSK-F63 electrospindle, automatic tool changer, and 12-position HSK magazine allow for the performance of various operations without manual tool changes. An additional advantage is the drilling head equipped with 7 vertical and 5 horizontal spindles, as well as a highly efficient vacuum system with two Becker VTLF 250 pumps with a total rated performance of approximately 496 m³/h. The machine has a solid, industrial-grade construction – weight 4800 kg.

Year of construction: 2004, condition: ready for operation (used), A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible. Lredpfx Aswk Nldephot

Condition: good (used), Year of construction: 1999, power: 5.5 kW (7.48 HP), Equipment: CE marking, For sale is a robust and precise jointer and thicknesser from the German quality manufacturer Panhans. The machine is equipped with a Centrofix cutterblock. This quick-change system – similar to the Tersa cutterblock – allows for easy cutter replacement without time-consuming adjustment of the cutter knives. Technical data and features: +Manufacturer: Panhans +Type: AD 440/445-B +Year of manufacture: 1999 +Planing width: 630 mm +Motor power: 5.5 kW +Operating voltage: 400 V +Total length of the jointer tables: approx. 2,300 mm +Centrofix cutterblock +Cutterblock speed: approx. 5,000 rpm +Digital display for planing thickness +Electromotive adjustment of the thickness table with the push of a button +Two rollers in the thickness table +Automatic workpiece feed +Two feed speeds +Massive, finely planed cast iron tables +Folding jointer tables +Swiveling fence up to 45° +Dust extraction connection +Motor brake +CE version Lsdpfx Apezz Nk Eshjrt The robust Panhans construction ensures smooth operation and clean planing results. The digital display, the electric thickness table adjustment, and the Centrofix cutterblock allow the machine to be operated comfortably, quickly, and precisely. Ideally suited for professional use in carpentry shops, joineries, and woodworking shops. The machine can be demonstrated under power by prior arrangement. Shipping via freight forwarder is possible. You will receive an invoice with VAT shown. Price: €13,685 including VAT - €11,500 net Subject to prior sale and errors in the technical data.

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe DOUBLE TURRET Model ZL-45 B Year 1991 CNC Fanuc Ledpeypb Nkjfx Aphort Sold complete With documentation With chip conveyor

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, operating pressure: 280 bar, type of input current: AC, tank capacity: 360 l, input voltage: 400 V, space requirement height: 1,600 mm, space requirement length: 1,400 mm, space requirement width: 1,400 mm, pump capacity: 68 l/min, rotational speed (max.): 1,480 rpm, power: 11 kW (14.96 HP), Hydraulic Power Unit Manufacturer: Rexroth Mecman AB Model: A10V 0 45 DFR /31R-PSC62K01 Year of manufacture: 1998 Condition: very good (used) Functionality: fully operational Pump Manufacturer: Rexroth Pump Type: A10V 0 45 DFR /31R-PSC62K01 Max Pump Speed: 2600 rpm Pressure Regulator: with hydraulic flow control X-T open Direction of rotation: right (viewed from drive shaft) Flow Rate: 2 x 68 liters/min at 1450 rpm Operating Pressure: max. 280 bar Oil: ISO VG 46 Drive Power: 2 x 11 kW Electric Motor Speed: 1450 rpm Input Voltage/Frequency: 400 V / 50 Hz Tank Capacity: 360 liters Accumulator Capacity: 32 liters The unit is equipped with the following components: • 32-liter accumulator • Double filter unit with pump • Digital pressure transmitter • Dryer • Solenoid valves • Oil/water heat exchanger • Drip tray • Terminal box Dimensions (L/W/H): 1,400 mm / 1,400 mm / 1,600 mm Weight: 850 kg Variable displacement axial piston pump for hydrostatic drives in open circuit. The flow rate is proportional to the drive speed and the displacement volume is adjustable. The swash plate allows infinitely variable adjustment of flow rate. 2 leakage oil connections Good suction characteristics Low noise level Long service life Favorable power-to-weight ratio Comprehensive regulator options Short response time The through-drive is designed for mounting gear pumps or axial piston pumps of the same nominal size, i.e. 100% through-drive capability. Ljdpfx Apox Szxljhjrt

Condition: used, Year of construction: 2023, New exhibition machine! List price €11,950 net • Equipped with a TERSA cutterhead for ultra-fast cutter blade changes • The TERSA cutterhead system enables particularly quiet operation • Helically toothed steel feed roller for consistent and uniform material feed • Material feed with two speeds via a separate motor • The particularly long planing tables facilitate easy and precise adjustment of the workpieces • Work tables are made of cast iron, annealed and stress-free, making them durable and permanently flat • Planing tables that open simultaneously towards the rear for short setup times • Planing table adjustment via handwheel with numerical display for planing height • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Material removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helically toothed feed roller (ideal for economical planing of hardwood) • Quality - Made in Europe Equipment details: Tersa cutterhead • No more adjusting and screwing required • Cutter blade changes in seconds • Self-locking • Particularly quiet operation The material feed • Helically toothed steel feed rollers for a consistent and uniform wood feed without leaving marks • Several teeth engage simultaneously for powerful feed • Wear-free compared to rubber feed rollers Fixed dust extraction hood • Thanks to the fixed dust extraction hood, there is no need to change the dust extraction hose when retooling • This saves valuable working time Simultaneous opening of the planing tables • Simultaneous tilting of the planing tables with spring support for quick and convenient adjustment for thickness planing in seconds Thickness table adjustment • FS 41 elite s with thickness table adjustment via handwheel with integrated display • The thickness table is mounted on four large-sized spindles, which ensure maximum stability under all working conditions. • Thanks to the special lifting device, the table position remains perfectly maintained even without locking. Anti-recoil guards • Massive anti-recoil guards prevent workpieces from recoiling • The 4-cutterhead ensures an optimal planing result Anodized aluminum planing fence • Large-sized (1200 x 150 mm) • Easy to move • Adjustable from 90° to 45° via a scale • Supplied as standard with an auxiliary fence for safe planing of even narrow workpieces Technical description - Planer Overall length of the tables 2200 mm - Planer Working width 410 mm - Planer Material removal max. 5 mm - Planer Dimensions of the planing fence 1200 x 150 mm - Thickness Dimensions of the thickness table 775 x 410 mm - Thickness Working height min. 3 mm - Thickness Working height max. 240 mm - Thickness Feed speeds 6 / 12 m/min - Cutterhead speed 5000 1/min - Cutterhead diameter 95 mm - Number of cutter blades 4 pcs. - Electrical connection 400V / 50Hz - Motor power 5.0 kW - Dimensions (L x W) 2250 x 1440 mm - Dust extraction port diameter 1 x 120 mm - Weight 450 kg Lodpfx Apjz Ebprehsrt Storage location: Rieth

Condition: excellent (used), Year of construction: 2013, ATLAS COPCO GA45VSDFF air compressor, API481000, water-cooled MANUF. ATLASCOPCO TYPE GA45VSDFF S/N API481000 YEAR 2013 POWER (kW) 45 Lodpfoz D D Hqox Aphjrt CAPACITY (m3/min) 8.61 PD (bar) 12.75 HOURS (SERVICE/TOTAL) VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER yes HEAT EXCHANGER yes COOLED (AIR/WATER) water WITH TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. Lredpfx Ajzwp Uiephot The machine is still connected and can be tested. Price plus VAT.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 450 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 450 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR45 - manufactured in Europe & tested according to the current DIN EN 15512 standard. Lredpfez Duy Usx Aphot - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 450 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1640,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,975 h, machine/vehicle number: 00110813-06.17, control type: CNC control, actuation type: electric, controller manufacturer: Schneider Electric, controller model: Magelis, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 9,975 h, laser power: 450 W, laser wavelength: 1,050 nm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, working length: 500 mm, working width: 500 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, input voltage: 1,200 V, input current: 30 A, type of cooling: air, total length: 1,180 mm, total width: 1,343 mm, total height: 1,341 mm, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used ALPHALASER AC 450 F laser cutting machine, manufactured in 2017, for sale. Manufacturer: ALPHALASER Model: AC 450 F Year of manufacture: 2017 Lrjdpez Ahzfsfx Aphst Laser operating hours: 9975 hours without dust extraction system If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: The machine was a demonstration unit, equipped without a control system. -Manufacturer: WIPA, Hammer mill Lrodjzbk Iyepfx Aphet -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable Quantity: 1 piece available -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Condition: good (used), Code: 0461 Brand: ALTENDORF Model: F 45 III - CE Standard CNC-controlled 3-axis panel saw with tilting blade for furniture, custom-made furnishings, panels, doors, wooden window frames, plastics, composite materials and various - CE Standard Technical data: Precise sliding double roller carriage Aluminium carriage length 3200 mm Max blade diameter 450 mm - (without scoring unit mm 550 ) Max cutting height 150 mm - (without scoring unit height mm 200) Cutting height at 45° 105 mm - (without scoring unit height mm 141) Scoring unit blade diameter 120 mm 3 controlled axis (lifting/blade tilting/parallel guide) Electric motor adjustment 2-axis scoring unit Control panel at operator height with colour LCD screen Anodised aluminium table extension 840 mm Parallelogram blade guard Register for oblique square cuts, manual adjustment, with length compensation, end cutting up to 3500 mm Blade locking system Ledpezp Dx Hsfx Aphert Work table height 910 mm Motor power Hp 7,5 USB Port Diagnostics Overall dimensions of assembled machine mm 3400 x 3600 x 1800 h Overall dimensions for transport mm 3400 x 2100 x 1800 h Weight kg 1050

Condition: used, mileage: 50,887 km, power: 330 kW (448.67 HP), first registration: 04/2010, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2028, brakes: retarder, color: red, gearing type: automatic, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, all wheel drive, crane, parking heater, Internal vehicle number: T028 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Lsdpfszpcxlex Aphsrt Manufacturer: Manitowoc Lifting moment: 1230 kNm Capacity: 45 tons at a reach of 2.5 m Lifting capacity: 35 t at a reach of 3 m Maximum lifting moment: 125 kNm Reach: 34 m MAX. reach: 47 m 360-degree rotation Combined engine for driving and crane operation: HINO E 13 C, 6 cylinders, Euro engine III A, 330 kW at 1,800 rpm Torque: 1,930 Nm at 1,300 rpm Operating hours: approx. 5,900 Financing example: * Internal number: T028 * Purchase price: €109,900.00 * Down payment: 10% * Term: 60 * Monthly payment: €1,700.49 * Residual value: €22,000.00 If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Subject to errors. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 350 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 350 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR35 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 350 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. Ljdpfx Aoz Duyhephsrt -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1460,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, axle configuration: 3 axles, first registration: 01/2010, loading space length: 9,650 mm, loading space width: 2,350 mm, loading space height: 2,300 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 1,310 mm, Year of construction: 2009, Tyre size: 385/65R22.5 Ledjzmun Tjpfx Aphort Suspension: air suspension Drive: Wheel Empty weight: 8.730 kg Carrying capacity: 30.270 kg GVW: 39.000 kg Make of bodywork: SCHMITZ Tipper: Back

Condition: used, Year of construction: 2002, operating hours: 49,100 h, functionality: fully functional, clamping force: 450 kN, overall weight: 3,300 kg, First owner Lodpfozal Thex Aphsrt

Condition: used, ABA precision surface grinding machine with accessories, machine used very little. Magnet size: 400x250 mm Infinitely adjustable grinding spindle Grinding wheel dressing device (Diaform) Automatic feed Feed rate infinitely adjustable Inch mode Coolant system with belt filter system Dust extraction for wheel dressing device Balancing device, centering arbor, Lrjdpfxsz Ehmdo Aphot Wheel removal device Tool cabinet with various new grinding wheels Operating manual.

Year of construction: 2001, condition: used, functionality: fully functional, Used Paragon Cox H20 vacuum twin-shaft mixer/disperser with hydraulic lift and drive for sale Product-contact parts made of stainless steel Complete with hydraulic system Control cabinet not included Manufacturer: Cox Paragon Year of manufacture: 2001 Lrjdez Eb R Ajpfx Aphst Product-contact parts made of stainless steel 1 x 3-blade adjustable butterfly mixer (6 mm thick), max. 400 rpm SAI GM2-300 D40J 50 kW hydraulic piston motor 1 x High-speed dispersing mixing head, approx. 1000 rpm Sauer-Danfoss MMF046C 45 kW axial piston hydraulic motor Hydraulic power unit main motor: 30 kW, 1465 rpm, 400/660 V 2 x 210-liter mixing vessels + hydraulic press head Mixer can be hydraulically lifted by approx. 100 cm