Used Doosan Gc30E-5 for sale (309)

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes. Country of Origin: Korea Dusdoyfgymspfx Af Djn Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 125 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 47 kW (63.90 HP), empty load weight: 4,850 kg, drive type: Treibgas, LPG forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Like new Technical condition: New Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Sideshift, Djdpjx Aw S Tsfx Af Dsun 3rd valve, 4th valve, Half-cab,

Condition: good (used), Year of construction: 2006, Doosan Puma 280 CNC Slant Bed Lathe With Fanuc Series 21i-TB Control 3 Jaw Power Chuck. Swing Over Bed Ø630mm. Swing Over Saddle Ø500mm. Recommended Turning Ø420mm. Maximum Turning Ø420mm. Maximum Turning Length 658mm. Maximum Bar Capacity Ø76mm. Axis Travel 'X'=242mm, 'Z'=680mm. Rapid Traverse 'X'=20m/min, 'Z'=24m/min. Maximum Spindle Speed 3,500rpm (23kW Motor). 10 Station Turret. turning Tool Shank 25 x 25mm, Boring Bar Ø50mm. Tailstock Quill Taper MT5, Quill Ø100mm, Quill Travel 100mm. S/No.PM2800047 (2006/10). With Tool Setting Arm, Parts Catcher, Tailstock & Foot Switches. Weight 4,700kg. Dodpfx Aoydmfmef Djun

Condition: used, Year of construction: 2006, turning diameter 320 mm turning length 322 mm control Fanuc D -iT greates pass round over bed 510 mm x-axis 175 mm z-axis 330 mm spindle tunring speed 6.000 U/min spindle drive 15 kW number of tool places 12 Pos. auto power on hours ca. 43.947 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Manual tailstock - Tool setter arm - Parts catcher with collection box Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Duodpfx Afsya Ih Ij Den Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2008, functionality: fully functional, We offer this used DOOSAN Puma 300C CNC lathe, year 2008, currently located in Spain. Immediately available. Travel distances: X-axis: 282 mm Z-axis: 681 mm Rapid traverse speed: X-axis: 16 m/min Z-axis: 24 m/min Swing diameter over bed: 590 mm Max. turning diameter: 400 mm Max. turning length: 630 mm Centre distance: 690 mm Bar capacity: 102 mm Spindle bore: 115 mm Spindle power: 26 kW Dedpfx Aeyg Ndwjf Doun Spindle speed range: 10–2800 rpm Tool turret stations: 12 Bar feeder: SpaceSaver SS

Condition: used, Year of construction: 2022, functionality: fully functional, turning length: 1,280 mm, turning diameter over cross slide: 255 mm, type of input current: three-phase, bar passage: 81 mm, total height: 2,200 mm, total length: 5,400 mm, chuck outer diameter: 210 mm, total width: 1,800 mm, overall weight: 7,850 kg, Equipment: documentation/manual, We are offering this used Doosan PUMA 2600 LSY II CNC turning and milling center, year of manufacture 2022. Model: PUMA2600LSYII Serial number: ML0378-000106 Power supply: AC 380 V, 3~, PE, 50/60 Hz Rated power: 57.08 kVA Interrupting capacity: 5 kA Full load current: 86.73 A Short-circuit capacity: 10 kA Wiring diagram output: P21SYH31UE04 Weight: 7850 kg Date of manufacture: 2022.03 6-AXIS CNC – HORIZONTAL – HIGH-PERFORMANCE TURNING CENTER with LIVE TOOLS, Y-AXIS, and SUB-SPINDLE Commissioning: 02/2023 Low hours, operated on single-shift basis only The machine can be demonstrated under power at our premises. Affordable shipping can be arranged. Technical details and scope of delivery: • CNC control FANUC 0-iTF+ with Manual Guide i, 15” touch screen • MONOBLOCK machine bed, cast construction (Meehanite cast iron) 30° slant bed in tubular design • Main and sub-spindle as built-in spindle units • Main spindle with 5 bearings (3x angular contact ball bearings + 1x double-row cylindrical roller bearing) spindle bearings, precision class P4, lifetime lubrication • Three-jaw power chuck for main spindle Ø 255 mm and sub-spindle Ø 175 mm including 1 set of soft top jaws • Through-hole clamping unit, hydraulically actuated with hollow clamping cylinder, complete with safety device, coolant catch tray, stroke control, and draw tube • 12-position tool turret with BMT 65 P mountings and directional logic • Maximum turning length 1280 mm • Bar feeder interface • Electronic safety coupling for X and Z axes • Automatic central lubrication • Oil separator • 3-color warning light beacon • Hardened flatbed guideways, counter-side coated with Rulon 142 • Z-axis way cover • Full enclosure • Waterproof work area lighting • 1 set of auxiliary tools • Alignment bolts and mounting pads • Coolant system with 7-bar delivery pressure • Absolute position measuring system on all axes • Spindle motor AP2/10000_7.5/1.5kW • Bar capacity Ø 81 mm • 3-jaw chuck Ø 210 mm (main spindle right) • Hard jaws • Internal coolant supply through the sub-spindle • Workpiece ejector • Parts catcher with conveyor belt for the sub-spindle • Automatic tool measurement arm, electrically swiveling • Coolant pump, delivery pressure 14.5 bar, 30L/min • LNS scraper-type chip conveyor MH500, right side • Oil mist extraction system • 1.5 m bar loader adapted and fully functional on the machine External dimensions / footprint: Length 5400 x Depth 1800 x Height 2200 mm (with chip conveyor) Dodpfx Aoyhp Hzof Doun With extraction system, height is 2800 mm Further optional used accessories available from us: Tool holders, live tool holders, collet chucks right and left with collets 185E from Ø 1-60 mm, adapters for Hainbuch mandrel clamping system If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2011, - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2011 Technical specifications Capacity: - Swing over bed: 780 mm - Swing over carriage: 630 mm - Recommended turning diameter: 255 mm - Maximum turning diameter: 376 mm - Maximum turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (belt type): 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm - Counter spindle through hole diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Subspindle motor: 7.5 kW Dsdpfx Aeuxua Iof Deun - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Breuning bar loader: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Condition: excellent (used), functionality: fully functional, cutting diameter: 560 mm, DOOSAN PUMA 400 LMB FANUC 21i CONTROL MAX TURNING DIA 560 MM MAX WORKING LENGTH 2000 MM MAX SWING OVER BED 770 MM SWING OVER SADLE 590 MM X Z AND C AXIS - 360 DEGREES 0.001 DEGREES HYD CHUCK 380 MM DIA Dsdpfxsyciq Ao Af Deun HYD STEADY ( SMW BLOCK ) SPINDLE BORE 132 MM 12 STATION TURRET SWARF CONVEYOR QUILL DIA 120 MM MORSE TAPER 6 QUILL TRAVEL 120 MM POWER REQUIREMENTS 60 KVA FLOOR SPACE 4220 X 2180 MM WEIGHT 10 TON

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Shown working on our motorsport jobs all done in one! Dujdpfoydigmjx Af Don Can be demonstrated if required.

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 770 mm, spindle motor power: 18,500 W, controller manufacturer: FANUC, controller model: 31i-MODEL B, number of axes: 9, This 9-axis DOOSAN PUMA TT 1800 SY was manufactured in 2014, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT 1800 SY machine we have for sale. Contact us for more information. Additional equipment • LNS bar interface • the robot is not included Machine Benefits Qualitative Machine Benefits • Part ejector + internal cooling for sub-spindle • Automatic electric tool measurement • Air conditioning in the electrical cabinet • Lns lamella-type chip conveyor • Auto door for robot application • Absolent air system mounted on the machine • 3 pcs driven tools radially • 4 pieces of m-l21590377d triple holders with v-offset, 2 pieces of m-l21590337e axial external holders, 2 pieces of m-l21590347d double holders (single l/h), 4 pieces of m-l21590367d double holders (external), 6 pieces of m-l21590317 single holders (external), 2 pieces of m-l21590387c single holders (external), and 6 pieces of m-l21590327b internal holders • 3 pcs hard jaws Technical Machine Benefits • Max turning diameter: 230 mm • Max turning length: 230 mm • Bar capacity: 65 mm Dedpeyaqq Esfx Af Dsun • C1-c2 axis: 360, x2: 190 mm, z2: 720 mm • 2 x 12 position turrets, all positions driven (24/24 index) • Tool holder: bmt 55 p • Driven tools: 5. 5 kw, max: 5000 rpm • Coolant pump for main turret: 3. 7 kw, 14 mpa, 30 l/min • Coolant supply via sub-/right spindle • Belt-type oil skimmer, part ejector Extra Information Machine still under power

Condition: good (used), power: 102 kW (138.68 HP), Year of construction: 2015, operating hours: 4,330 h, Year of manufacture: 2015 Model year: 2015 Drive: Wheel GVW: 15.200 kg CE mark: yes Technical condition: good Visual appearance: good Doosan DX140W-3 – 2015 – 4,330 Operating Hours For sale: Doosan DX140W-3 wheeled excavator in good and well-maintained condition. Year of manufacture 2015 with only 4,330 operating hours. This machine is equipped with a 2-piece boom, providing excellent flexibility and reach, making it suitable for a wide range of excavation, infrastructure and demolition works. Fitted with a CW30 quick coupler and demolition/sorting hydraulic function, allowing immediate use with various attachments. Specifications: Make / Model: Doosan DX140W-3 Year: 2015 Operating hours: 4,330 hrs Duedpoygidqsfx Af Don Undercarriage: Wheeled Boom: 2-piece (VA boom) Quick coupler: CW30 Auxiliary hydraulics: Demolition / sorting function Engine: Doosan diesel engine Comfortable cab with excellent visibility A reliable and powerful excavator, known for its low fuel consumption and high operator comfort. Ready for work. Price and inspection upon request Transport can be arranged.

Condition: used, Year of construction: 2011, For sale: 1 CNC lathe Doosan PUMA2100MS, year of manufacture 2011, including bar feeder, chuck, and tool holders. Dusdpexdwayjfx Af Dsn The machines are in very good condition, have been regularly serviced, and are ready for immediate use. They impress with their precision, reliability, and compact design – ideal for series production.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm Dedpfx Afew Dkfls Dsun MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT ; PCMCIA SERIAL PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: ready for operation (used), Year of construction: 2007, overall weight: 12,500 kg, This DOOSAN VT 900 was manufactured in 2007. It's a vertical turning machine featuring a CNC FANUC Oi-TC, a chuck diameter of 630 mm, and a conveyor. Weighing 12500 Kg, it also meets CE standards. Consider the opportunity to buy this DOOSAN VT 900 vertical turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Chuck diameter: 630 mm Dusdpfsyalm Usx Af Don

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, tool weight: 30,000 g, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Belt-type oil skimmer • Triple light tower • Shower coolant • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shutdown Dusdpfx Ajyair Usf Don • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Benefits Technical Machine Benefits • Equipped with fanuc 31i cnc control • B-axis: indexable by degree • Pallet size: 800 x 800 mm • Pallet centering device • Tool magazine: 60 tools type bt 50 • Max. Torque: 1732 n·m Extra Information Machine still under power Dimensions Machine Depth 8150 mm

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, spindle motor power: 3,700 W, total height: 1,730 mm, overall weight: 4,800 kg, number of axes: 5, This 5-axis DOOSAN PUMA 2000SY was manufactured in 2005, designed for precision in horizontal turning. Ideal for complex machining tasks, it offers robust performance and reliability. Consider the opportunity to buy this DOOSAN PUMA 2000SY horizontal turning machine. Contact us for more information about this machine. Additional equipment Dujdpfjyaip Hox Af Dsn • LNS Quick Load Servo Bar Feeder Machine Benefits Technical Machine Benefits • Max. Turning diameter: 330 mm • Distance between centers: 510 mm • Type: auto turret servo • Tooling size: 25 mm (bmt) • Presetter • Coolant pump (high pressure) Extra Information Machine still under power Dimensions Machine Depth 3118 mm

Condition: new, Year of construction: 2019, load capacity: 6 kg, arm reach: 900 mm, Coobot Doosan M0609 Load capacity: 6 kg Dujdpfx Afoquqrve Don Reach: 900 mm Repeatability: ±0.05 mm Condition: New

Condition: ready for operation (used), Year of construction: 2011, number of axes: 2, This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Additional equipment • Motorized bar passage with counter-spindle • Complete with accessories and LNS bar loader Extra Information Machine still under power Dujdpfsx D Drvjx Af Djn

Condition: used, Year of construction: 2011, operating hours: 10,680 h, Year of manufacture: 2011 Dodpox Hgr Hefx Af Dsun Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 347 cm Digging depth: 7.533 m

Condition: excellent (used), power: 210 kW (285.52 HP), Year of construction: 2014, operating hours: 13,949 h, Equipment: air conditioning, Empty weight: 34.980 kg Make of engine: DOOSAN CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Please contact Nedtrax B.V. for more information DOOSAN DX340LC-3 Year: 2014 Reading hours: 13949 h Weight:34980 KG 209.6 kw Mono boom Hydraulic Quick Coupler hammer pipe Central greasing Original paint Cameras Airco/klima CE-MARKED Duedpfxeyf Tvuo Af Djn In good condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 2,125 mm, turning diameter over cross slide: 580 mm, turning diameter: 420 mm, spindle motor power: 25 W, spindle bore: 102 mm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 2,190 mm, mount diameter: 315 mm, For sale: DOOSAN PUMA 3100XLY turning center from 2013. Technical data: Max turning diameter: 420mm Max turning length: 2125mm Axis travels X/Y/Z: 293 / 130 / 2190mm Chuck size: 315mm (12'') Spindle bore: 102mm Max spindle speed: 2800rpm Spindle type: Electro-spindle Number of turret stations: 12 Max driven tool speed: 5000rpm Head type: BMT65 Machine weight: approx. 11,000kg Machine equipped with SMW SLU3 self-centering steady rest - 45-165mm Dodpfx Afoyhv N Ns Dsun Control system: Fanuc with Manual Guide Machine in continuous operation. Inspection and testing possible. Both static and driven tool holders included.

Condition: used, power: 102 kW (138.68 HP), fuel type: diesel, Year of construction: 2019, operating hours: 3,035 h, Drive: Wheel Empty weight: 15.050 kg Dusdexgz Utspfx Af Djn Serial number: N016 Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2017, operating hours: 524 h, load capacity: 3,000 kg, lifting height: 4,760 mm, free lift: 1,690 mm, fuel type: gas, mast type: triplex, construction height: 2,180 mm, drive type: Treibgas, LPG forklift Mast type: Triplex Transmission: Automatic Front tyres type: Superelastic Front tyres size: 650-10 Rear tyres type: Superelastic Dusdpfx Aoyfy Ahof Den Rear tyres size: 28x9-15 Sideshifter, fork positioner, Power steering; wiper; operating weight with superstructure: 4798 kg Front windscreen, half-cab,

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: P20M0199, turning diameter over cross slide: 250 mm, turning length: 600 mm, turning diameter: 300 mm, spindle bore: 60 mm, spindle speed (max.): 2,000 rpm, Equipment: documentation/manual, CNC MODEL: FANUC SERIES 18-T Dedpfx Afsygl Ixe Dsun MACHINE IN EXCELLENT CONDITION, USED ONLY FOR FINISHING OPERATIONS VDI TURRET

Condition: excellent (used), Year of construction: 2019, CNC Lathe 2-Axis Doosan Puma GT2600 Year of manufacture: 2019 Control: Fanuc i Series with Manual Guide Dujdpfx Asycgpcsf Dsn Max. turning diameter: 460 mm Max. turning length: 658 mm Spindle speed (belt drive): 3,500 rpm Spindle bore: 81 mm SMW Autoblok chuck 250 mm Axis travel: - Z axis: 680 mm - X axis: 265 mm 12-position tool turret Tailstock Renishaw tool probe - chip conveyor with tank and pump - documentation - tool holders Operating hours: 2,700 hours Very good condition