Used Doosan Gc20Sc-5 for sale (420)

Condition: defective spare-parts repository (used), Year of construction: 2015, operating hours: 56 h, Functionality: not functional, machine/vehicle number: 433760 EDIPA, power: 228 kW (309.99 HP), fuel type: diesel, number of cylinders: 6, nominal power: 261 kW (354.86 HP), rotational speed (min.): 1,470 rpm, rotational speed (max.): 2,100 rpm, type of cooling: water, Selling our defective sprinkler motor. It seized due to overheating after approximately 56 hours of operation, as the pipe was unfortunately defective. Bshx Dxmowbc A Romewl The unit is being sold defective and without any warranty or return. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2022, Swing over bed 900mm, Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 2002mm, bar capacity 165.5mm, Spindle speed 1500rpm, milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Fanuc I control. 3 jaw chuck, tool setter, swarf conveyor, Bohxev E Rt Hj Dxmmewl

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: MV 0092-001134, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,300 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, Hardly used. Available immediately. Additionally free tools: - Tool holders - Clamping, lathe holders - Divider - Vices - Machine tooling Technical data: Axis movement range: - X axis: 1300 mm - Y axis: 670 mm - Z axis: 625 mm Feed speeds: - X and Y axis: 36 m/min - Z axis: 30 m/min Dimensions and weight: Length: 2597 mm Width: 3350 mm Bwjhx Dowcd Udoxmmjl Height: 3120 mm Weight: 8000 kg

Condition: used, Year of construction: 2014, DOOSAN DNM 650 II MACHINING CENTER YEAR OF FIRST INSTALLATION: 2014 CNC: SIEMENS SINUMERIK 828 D TABLE DIMENSIONS: 1,300 mm x 670 mm MAX. WEIGHT ON THE TABLE: KG. 1,000 TRAVELS: Bwshx Dxmowcg I Temjl X: 1,270 mm Y: 670 mm Z: 625 mm TOOL MAGAZINE: 30 POSITIONS TAPER: ISO 40 MAX. SPINDLE SPEED: 12,000 RPM INTERNAL SPINDLE COOLING / HIGH PRESSURE SPINDLE MOTOR POWER: 15 KW MACHINE IN PERFECT CONDITION COMPLETE WITH ALL MANUALS WEIGHT: KG. 8,500

Condition: used, Functionality: fully functional, Year of construction: 2022, operating hours: 410 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,145 mm, power: 42 kW (57.10 HP), fork carriage width: 1,190 mm, fork length: 1,200 mm, engine type: Kubota, drive type: Diesel, net weight: 4,850 kg, Diesel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Technical condition: Very good Bwshx Dxeukxcvommjl Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Sideshift, 3rd valve, 4th valve, half cab, full free lift, twin tires,

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 1,050 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, Machine details Stock-No. 1105-04012 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type NM 510 Year of manufacture 2008 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 540 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm rapid traverse 36 m/min Bohstrybcsx Dxmmowl weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 18 kW turning speed range 12000 1/min tool taper SK 40 table surface area 1200 x 500 mm groove width 18 mm Number of noches 4 pcs. Additional information direct measuring system, el. handwheel, internal coolant supply package (chipconveyor, cooling trought the spindle, 12.000rpm spindle) fanuc SERIES I MC CONTROL LIKE NEW

Condition: used, Year of construction: 2016, operating hours: 945 h, Field of application: Construction Empty weight: 900 kg Bjhx Dxewaq Dyjmmewl Make of engine: Yanmar 4NTV88 Working pressure: 7 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2012, - Doosan-Fanuc CNC control - Extended spindle bore 102 mm - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2012 Technical specifications Capacity: - Swing over bed: 780 mm - Swing over carriage: 630 mm - Recommended turning diameter: 255 mm - Max. turning diameter: 376 mm - Max. turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (integrated): 4000 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore diameter: 102 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm - Counter spindle bore diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm Bwohxsuxt Rxo Dxmmel - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Counter spindle motor: 7.5 kW - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Breuning bar loader: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Condition: good (used), Year of construction: 2007, CNC Lathe Fanuc 18 T CNC axes: (X, Z, Y, B, C1 & C2) X travel 250 mm Z travel 580 mm Bwohxjwbtdxs Dxmmsl Y travel 100 (±50) mm B travel 580 mm C-axis 4,500 rpm/6,000° Spindle bore 76/45 mm Main spindle speeds 4,500 rpm Counter spindle speeds: 6,000 rpm Turret with 12 stations / 12 driven spindles at 4,500 rpm Control on / Feed time: 62,500 / 21,500 h (read 10/2024) Accessories: Standard, chip conveyor with hinged belt design, FMB bar loader 65 (1 m long), AGW, collets on Main and counter spindle, transformer, parts discharge conveyor & documentation Machine condition: Used in production – age-related wear

Condition: good (used), Year of construction: 2018, Functionality: fully functional, Control HEIDENHAIN iTNC620 with 15” LCD screen Table size 1500 x 670 mm Table load 1300 kgs X travel 1300 mm Y travel 670 mm Z travel 625 mm Max spindle speed 12 000 rpm Spindle power 32/15 kW Bohx Dxmsv Tpyhsmewl Max. torque 203 Nm ATC magazin 30-fold Tool holder type SK40 Big Plus Tool change 1.2 / 3.2 sec. Rapid feed (X/Y/Z): 36/36/30 m/min. Max. tool sizes D80 x 300 mm Power required 40 kVA Machine weight 8500 kgs Dimensions LxWxH = 3350 x 2600 × 3120 mm Features, accessories - Coolant unit - CTS 20 bar - Spindle cooler - Chip conveyor - 4. axis prepared - Portable MPG - CE mark - Transformer - Machine mounts - Manuals The machine is in good working condition.

Condition: good (used), Functionality: fully functional, fuel type: diesel, color: original, Year of construction: 2010, operating hours: 15,200 h, Equipment: cabin, Used Doosan DL500 Wheel Loader for sale. 15,200 hours Operating weight 30,700 kg Lifting capacity 8,000 kg Static tipping load (straight) 22,870 kg Maximum unloading height 4.58 m Turning radius outside 7.37 m Transport height 3.4 m Bucket with teeth 3.5 Travel speed 35 km/h Engine 250 kW Automatic lubrication system Cummins QSM11 ROPS cab Original painting. Behxovzqd De Dxmmswl

Condition: excellent (used), Year of construction: 2008, turning length: 500 mm, turning diameter: 510 mm, Machine details Stock number 1105-03878 Machine type CNC lathe - inclined bed machine Make DOOSAN DAEWOO Type PUMA 240 M Year of manufacture 2008 Control type CNC Control FANUC 21 TB Storage location FRANCE HAGUENAU Country of origin KORREA Delivery time Short term by arrangement Freight basis Ex works price Technical details Turning diameter 510 mm Turning length 500 mm Control FANUC 21 TB Rotation diameter via bed slide 390 mm Spindle speed - infinitely variable 4500 rpm Spindle bore 65 mm Bshx Djtrx Tgjxmmowl Drive power 15 kW Total power requirement 27 kW Machine weight approx. 4.5 t Space requirement approx. 3.7 x 1.6 x 1.7 m Accessories Driven tool stations 12-station turret C - axis 0.001 Parts collecting device with ejector 3-jaw chuck Additional information very good condition with c AXIS AND DRIVEN TOOLS SPAENEFOERERER CNC FANUC 21 IT WITH TAILSTOCK AND CHUCK

Condition: used, Year of construction: 2013, Used 2013 built Doosan DNM 650 ii heavy duty VMC with Fanuc control, 12,000 RPM direct drive, face & taper BT 40 spindle with through Spindle coolant and spindle chiller, Renishaw part and tool probe, Swarf conveyor. Specification: Axis X1270 mm Axis Y670 mm Axis Z625 mm FANUC OI-MC Table length 1300 mm Table width 670 mm Max. part weight 1000 kg Number of tool pockets 30 Bwehxjvkwc Es Dxmmol Spindle taper BT40 Max. spindle speed12000 rpm Spindle motor power 15 kW Length x width x height 4345.0 × 2720.0 × 2815.0 Weight 8500 kg Control: Fanuc Spec: Travel X1270 Y668 Z625 mm | 12000RPM | BT40 Accessories: Through Spindle coolant and spindle chiller, Renishaw part and tool probe Swarf conveyor, Mist extractor

Condition: used, Year of construction: 2011, - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2011 Technical specifications Capacity: - Swing over bed: 780 mm - Swing over carriage: 630 mm Bwjhx Dxsuxua Iemmel - Recommended turning diameter: 255 mm - Maximum turning diameter: 376 mm - Maximum turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (belt type): 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm - Counter spindle through hole diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Subspindle motor: 7.5 kW - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Breuning bar loader: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Year of construction: 2012, Condition: ready for operation (used), Control Unit Brand FANUC Bwehx Dxmev Tflysmjl Main Drive Number of axis 2 Media Chip conveyor Yes Additional Equipment 12 motorized positions Tail Stock Included Bezel Motorized This 2-axis DOOSAN PUMA 400LM horizontal turning machine was manufactured in 2012. Ideal for precision turning operations, it offers robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 400LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, DOOSAN PUMA 300 LC YEAR OF CONSTRUCTION 2011 TURNING LENGTH 570mm MAX. TURNING DIAMETER 400mm MAX. TURNING LENGTH 1280mm CHUCK 12' SPINDLE MOTOR 26 KW Bshx Dowfnvqjxmmowl BORE DIAMETER 102mm SPINDLE SPEED 2800 RPM TURRET : 10 STATION

Condition: used, Year of construction: 2007, machine/vehicle number: PT18SY0137, turning length: 230 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, tool mount: 20 mm, rapid traverse X-axis: 20 m/min, bar passage: 65 mm, Equipment: documentation/manual, The machine is in good technical condition. Chip disposal transporter Plenty additional tool and accessories within the machine. You'll be responsible for arranging dismantling, packing, loading and transportation. Full Payment must be made before loading. Bwshxowc S Sde Dxmmel

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, turning length: 712 mm, turning diameter: 370 mm, spindle bore: 77 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 255 mm, travel distance Z-axis: 790 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, quill stroke: 120 mm, CNC Fanuc i Series WORKING CAPACITY: Rotating diameter on the bench: mm 651 Max turning diameter: mm 370 Max turning length: mm 712 Max turning diameter from bar: mm 76 SPINDLE: Self-centering diameter: mm 254 Rotation speed: rpm 3.500 Spindle attachment: ASA 8’’ AC motor power – KW /30 min: kW 18.5 TURRET: Number of tools: 12 Number of motorized tools: 12 Speed of motorized tools: rpm 5.000 Machine complete with: • Hydraulic self-centering SAMCHULLY diam. mm 254 • No. 1 axial motorized module • Approximately No. 12 fixed tool holders • Tool presetting in the machine Bjhjwaxmcex Dxmmswl • Instruction manuals and CE declaration

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan P126TI-II, General information Field of application: Construction Serial number: 20240416046 Weights Empty weight: 3.254 kg Functional Generator capacity: 330 kVA Other information Fuel consumption: 47 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 500 l Transport dimensions (LxWxH): 3,938x1,3x2,03 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Bwehx Dxeuq U Smjmmsl

Year of construction: 2021, Condition: ready for operation (used), Control Unit Brand SIEMENS Model 828 Main Drive Spindle speed range 2800 Media Chip conveyor Yes Additional Equipment 7 Bar Cooling Pump Oil Skimmer Bwshxju Rvuqj Dxmmel Part Catcher Conveyor Type Bar Feeder Interface Automatic Door 3 Colour Signal Light EasyLoader with Stainless Steel Grid Plate This DOOSAN PUMA 2600LSYB II horizontal turning machine was manufactured in 2021. It features a SIEMENS 828 control with a 15'' touch screen, 2800 RPM spindle speed, and a 102 mm through spindle. Key accessories include a turret BMT65 with 24 positions, EPPINGER driven holders, and a SCHUNK gripper. It includes a robot too. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600LSYB II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: HP510141, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, spindle speed (max.): 14,000 rpm, total length: 500 mm, table height: 500 mm, table load: 500 kg, number of slots in tool magazine: 40, Equipment: documentation/manual, Improved chip disposal Three tool blocks Three tool blocks in addition to machine Bwjhx Dewcxm Usxmmjl Plenty additional tool and accessories within the machine You'll be responsible for arranging dismantling, packing, loading and transportation. Full payment must be made before loading.

Year of construction: 2005, Condition: ready for operation (used), General Data Measurements width 1705 mm Bjhx Djv E Smhjxmmewl Measurements depth 3118 mm Measurements height 1730 mm Machine weight 4800 kg Control Unit Model FANUC 18iTB (Manual Guide i) Main Drive Spindle speed range 5000 rpm Spindle motor power 3.7 kW Number of axis 5 Workpiece Workpiece drm over bed 600 mm Turret Number of turrets 1 Tools Number of station 12 Media Chip conveyor Yes Additional Equipment LNS Quick Load Servo Bar Feeder This 5-axis DOOSAN PUMA 2000SY was manufactured in 2005, designed for precision in horizontal turning. Ideal for complex machining tasks, it offers robust performance and reliability. Consider the opportunity to buy this DOOSAN PUMA 2000SY horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2014, Condition: ready for operation (used), Control Unit Brand FANUC Model 31i-MODEL B Bjhx Dovzc A Ssxmmswl Main Drive Spindle speed range 5000 Spindle motor power 18.5 / 22 kW Tool taper A2-6 Number of axis 9 Movement X-Axis Movement 165 mm Y-Axis Movement 100 mm Z-Axis Movement 770 mm Additional Equipment LNS bar interface the robot is not included Control Unit Brand FANUC Model 31i-MODEL B Main Drive Spindle speed range 5000 Spindle motor power 18.5 / 22 kW Tool taper A2-6 Number of axis 9 Movement X-Axis Movement 165 mm Y-Axis Movement 100 mm Z-Axis Movement 770 mm Additional Equipment LNS bar interface the robot is not included This 9-axis DOOSAN PUMA TT 1800 SY was manufactured in 2014, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT 1800 SY machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2012, Condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 5000 Behx Dxmev Rr Txemswl Number of axis 2 Movement X-Axis Movement 175 mm Z-Axis Movement 380 mm Workpiece Workpiece drm over bed 510 mm Workpiece drm over support 290 mm Workpiece drm 322 mm This DOOSAN Lynx 220 Alpha was manufactured in 2012. A reliable horizontal turning machine, it offers robust performance for precision machining. Ideal for those looking to enhance their turning capabilities. Contact us for more information. Application Types Turning

Year of construction: 2022, Condition: ready for operation (used), Control Unit Brand FANUC Model i series Movement X-Axis Movement 362 mm Z-Axis Movement 1150 mm Workpiece Workpiece drm 650 Workpiece X 951 Media Chip conveyor Yes Additional Equipment Power of motorized tools: 45 KW High pressure system: 15 Automatic presetting: Yes This DOOSAN PUMA 5100A was manufactured in 2022. A robust horizontal turning machine, it offers reliable performance for your machining needs. Consider the opportunity to buy this DOOSAN PUMA 5100A horizontal turning machine. Contact us for more information. Application Types Bshx Dxsv Rr Sbjmmewl Turning