Used Thomas T255 for sale (13)

Condition: good (used), Year of construction: 2003, Consist of : 4 x 6000 mm cross chain conveyers, mounted on floor 1 x TRANSLYFT lifting table, twin sissor model, 4000 x 1000 mm, max lifting capacity : 4000 Kg Dodpfxsy Tzi To Apdokn 4 x chain conveyers, 1000 mm, mounted on top of lifting table 1 x THOMAS PETTERSSON TP600 vacuum infeed device, mex width between vacuum suction cups : 4000 mm, ( can lift 6000 mm items. 1 x THOMAS PETTERSSON Electric cabinet 1 x driven band conveyer, 8000 mm

Condition: good (used), Thomas Hill Engineering Rotary air rinse Dedpfx Apsvw Srbjdskn Stainless, Rotary air rinse, 18 station, mobile, 3Ph

Condition: used, Year of construction: 1989, saw blade diameter 400 mm capacity 90 degrees: round 120 mm turning speeds 1400 / 2800 U/min engine output 4,0 kW weight of the machine ca. 180 Kg dimensions 1,0 x 0,9 x 1,2 m Djdpfjy D A E Dex Apdskn Manuell underfloor aluminum circular saw

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. Dedpfx Asth Taaepdskn 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Thomas, Rotary vane vacuum pump Djdpfx Aeyknh Aopdokn -Type: VTE 10 27740125 -Drive: 0.35 kW / 2700 rpm -Vacuum: 150 mbar -Flow rate: 10 m³/h -Dimensions: 265/160/H155 mm -Weight: 10.2 kg

Condition: good (used), Year of construction: 2007, Used manual bandsaw by Thomas Dkedsyhmglspfx Apdsn Type ZIP 35 Manual, single-sided mitre cut Capacity 250 x 350 mm

Condition: good (used), Year of construction: 2010, cutting diameter 220 mm saw band length 2480 mm table height ca. 910 mm capacity 90 degrees: flat 245 x 115 mm capacity 90 degrees: square 195 x 195 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: round 85.0 mm capacity 60 degrees: square 85 x 85 mm turning speed range: 45 + 90 m/min dimensions of saw-band 2480 x 27 x 0.9 mm clamping width max. 270 mm total power requirement 0.75 + 1.1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430 x 720 x 1700 mm New price in 2010 .. 2.400 Euro Special price on request Equipment: - For cutting profiles, pipes, solid materials made of iron - and non-ferrous materials - The saw arm can be tilted up to 60° for mitre cuts - Infinitely variable lowering via hydraulic lowering cylinder - Torsion-free, heavily dimensioned cast iron saw arm Dkedpfxsyf N D Uo Apdon - 2 saw blade speeds for optimum cutting results (400 V) - Automatic limit stop after material average - Robust cast iron vice with quick lock - Ball-bearing saw blade guide with quick adjustment for adapting to the workpiece width - workpiece width guarantees optimum work results

Condition: used, Year of construction: 2013, machine/vehicle number: 81300019158, Kolbenpumpe und -kompressor für CTP Anlagen / Piston Pump and Compressor CTP Processor Thomas - Rietschle 2750BGHISS75Baujahr / Year 2013 - Serial-No. 081300019158 Dksdpfeh Eg Txjx Apdon für CTP Anlagen (Beispiel Agfa) / for CTP Processors (examplae Agfa) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Stop magnet, pull magnet, opening magnet, stop magnet, locking unit -Manufacturer: Thomas/Sauer gear -Type: 82-5650-106700 Dkedpfx Aed Atxuepden -for: Sauer gear -Type: WE10J402F1E0D220 -Connection: 220 volts -Stroke: 12 mm -Number: 1x available -Price: per piece -Dimensions: 115/210/H145 mm -Weight: 7 kg

Condition: used, Year of construction: 2005, cutting diameter 270 mm saw band length 2925 x 27 x 0.9 mm capacity 90 degrees: flat 350 x 240 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 230 x 150 mm capacity 60 degrees: round 140 mm capacity 60 degrees: flat 140 x 140 mm table height 740 mm cutting speed 36 + 72 m/min clamping range max. 355 mm total power requirement 2.0 kW weight 1180 kg range L-W-H 2150 x 2400 x 1900 mm Dkodpfx Aoxaarwepdjn Equipment: - Metal band saw - Fully automatic with one-sided miter adjustment - Multifunction digital control panel - Programmable work cycle - Help and self-diagnosis in the event of malfunctions - Coolant system - Saw blade guide with hard metal plates - Hydraulic saw frame lowering - Automatic raising and lowering - Band tension with pressure gauge - Hydraulic vice clamping - Operating instructions (ENG)

Condition: used, Year of construction: 2009, cutting diameter 255 mm saw band length 2750 x 27 x 0.9 mm capacity 90 degrees: flat 300 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 170 x 120 mm capacity 60 degrees: round 110 mm capacity 60 degrees: flat 110 x 150 mm table height 900 mm Control konv. cutting speed 36 m/min clamping range 305 mm total power requirement 1.5 kW weight 440 kg range L-W-H 2000 x 1200 x 1950 mm Features: - Electro-hydraulic metal band saw - With miter adjustment 45° right / 60° left - Manual saw cut (with manual lowering) - Hand switch on the saw frame (saw blade on/off) - Electro-hydraulic material clamping (close/open switch) * Includes handwheel for vise adjustment - Handwheel for manual saw blade tensioning - Coolant system - Emergency stop button at the front - Operating instructions (English) Dksdpexacb Isfx Apdsn

Condition: used, This listing is for a Thomas 7100561 Vacuum Pump. The unit is in full working condition and is ready for immediate release. The Thomas 7100561 Piston Vacuum Pump is a top-tier dry-running WOB-L® piston pump, meticulously engineered for high-pressure applications. Its design prioritises low vibration and balanced flow, ensuring smooth operation while maintaining low power consumption, making it an excellent choice for energy-efficient workflows. Key Benefits: - Precision Performance: Known for its reliability, this pump is ideal for demanding environments, catering to industries such as medical, laboratory, and environmental applications. Dkedpfx Apexxyhvjdon - Impressive Flow Rate: Achieves a maximum free flow rate of 212 l/min (7.5 cfm), allowing for efficient handling of various tasks. - High Pressure Capabilities: Supports a maximum continuous pressure of 12.1 bar (175 psi), making it suitable for tasks requiring substantial pressure levels. - Strong Vacuum Performance: Provides a maximum continuous vacuum of -990 mbar (29.2 ), ensuring effective suction for a variety of applications. Specifications: - Type: Dry-running WOB-L® piston pump - Applications: Medical, laboratory, environmental - Maximum Free Flow Rate: 212 l/min (7.5 cfm) - Maximum Continuous Pressure: 12.1 bar (175 psi) - Maximum Continuous Vacuum: -990 mbar (29.2 )

Condition: new, empty load weight: 135 kg, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, permissible axle load (axle 1): 750 kg, loading space length: 3,600 mm, total length: 4,645 mm, total width: 1,754 mm, suspension: other, tire size: 155/70 R13, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2025, Single-Axle Trailer 750 kg (Payload approx. 600 kg) For jet ski transport or boats up to 3.6 m in length Manufacturer: Thomas Trailers BT-750-JET Brand-new trailer, 2-year manufacturer's warranty First registration: 3 years TÜV 100 km/h road approval* Registration documents (COC certificate and 100 km/h manufacturer's certificate) Available immediately! Financing available! Delivery at an additional charge! Welded, hot-dip galvanized frame Paint finish in ANTHRACITE GREY KNOTT rubber suspension axle, adjustable position WPS version – waterproof and maintenance-free wheel hubs Tyres 155/70R13 on steel rims Padded support boards, 180 cm length, adjustable KNOTT strap winch, adjustable 4 lashing eyes, adjustable position Jockey wheel 13-pin electrical connection LED lights, side hinged, waterproof LED position lights white/red Plastic mudguards Technical data: Gross vehicle weight: 750 kg Unladen weight: approx. 135 kg Payload: up to 615 kg Drawbar load: 50 kg Total length: approx. 4645 mm Overall width: approx. 1754 mm Width between mudguards: approx. 1355 mm Frame width: approx. 1235 mm Aluminium rims + EUR 200.00. Dkjdpex Uq Diefx Apdon Trailer available immediately. Delivery possible for an extra charge! Trailer also available in other colours. Offer price incl. 19% VAT. Unbraked boat trailers with 500 kg and 750 kg available straight away. Braked trailers from 1,300 kg to 2,500 kg also available immediately. Offer and further information on request: Office Tel. +49 (0) 2254/83718-20 Specifications subject to change, errors and prior sale excepted. Pictures may show optional equipment at extra cost. *Please observe national legal requirements regarding weight and speed restrictions.