Used Thomas T137 for sale (11)

Condition: good (used), Thomas Hill Engineering Rotary air rinse Stainless, Rotary air rinse, 18 station, mobile, 3Ph Gjdpfxevw Srbj Abrjuh

Condition: used, Year of construction: 2009, cutting diameter 255 mm saw band length 2750 x 27 x 0.9 mm capacity 90 degrees: flat 300 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 170 x 120 mm Godpfexacb Isx Abrouh capacity 60 degrees: round 110 mm capacity 60 degrees: flat 110 x 150 mm table height 900 mm Control konv. cutting speed 36 m/min clamping range 305 mm total power requirement 1.5 kW weight 440 kg range L-W-H 2000 x 1200 x 1950 mm Features: - Electro-hydraulic metal band saw - With miter adjustment 45° right / 60° left - Manual saw cut (with manual lowering) - Hand switch on the saw frame (saw blade on/off) - Electro-hydraulic material clamping (close/open switch) * Includes handwheel for vise adjustment - Handwheel for manual saw blade tensioning - Coolant system - Emergency stop button at the front - Operating instructions (English)

Condition: ready for operation (used), Thomas Super TRAD 301 DUAL MODE Manual Metal Bandsaw Year of manufacture: 2012 (machine in mint condition) Machine weight: 440 kg Guedpfoxcnyhjx Abrjh Band speed: 33/66 m/min Blade dimensions: 2750×27×0.9 mm Working height: 940 mm Cutting capacity: Round Square Rectangle 90°: 255mm 250mm 300x200mm 45°R: 190mm 180mm 190x170mm 60°R: 110mm 110mm 110x150mm 45°L: 160mm 140mm 170x120mm You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued (subject to a valid VAT ID number). Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in item description are reserved.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07A1137, feed rate X-axis: 28 m/min, working width: 230 mm, planing height: 130 mm, spindle diameter: 40 mm, planing width: 220 mm, working height: 125 mm, total height: 2,110 mm, total length: 4,320 mm, overall weight: 5,100 kg, spindle speed (max.): 6,200 rpm, spindle speed (min.): 6,200 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, workpiece height (max.): 125 mm, compressed air connection: 8 bar, jointer table length: 2,000 mm, type of input current: three-phase, input voltage: 380,415 V, number of spindles: 6, Equipment: cabin, motor brake, Robinson P1/6 Moulder with 6 heads, No: 07A1137, Year 2007 in very good working condition with very High Spec. Maximum Finished Section: 220 x 125m/m, Minimum Fiished Section: 20 x 6m/m. 2m. Long Infeed Table, Hard Chromed. Pneumatic Pressures to the Feed Rollers. Automatic Bed Lubrication Pump. Central Lubrication to slideways & bearings. 3: Driven Table Rollers. All spindles with seperate motors. Bottom: 5.5kw / Right: 5.5kw. / Left: 7.5kw / 1st. Top: 11kw / 2nd. Top: 11kw / 2nd. Bottom: 7.5kw. All Spindles 6200rpm. with mechanical brakes. Chromated Infeed Table and Bed Plates. Guedpfov Hpguox Abrjh 5.5kw. Feed Motor, with feed speeds from 6 to 28m/min. Full set of tools included. With Sound & Safety Hood, and overhead Dust Extraction Cluster included. Can be viewed still in situ in Sheffield, Yorkshire UK. Full set of photos on WhatsApp, show your Mobile Number on your enquiry.

Condition: used, Stop magnet, pull magnet, opening magnet, stop magnet, locking unit -Manufacturer: Thomas/Sauer gear -Type: 82-5650-106700 Gedpfx Ajd Atxuobrjuh -for: Sauer gear -Type: WE10J402F1E0D220 -Connection: 220 volts -Stroke: 12 mm -Number: 1x available -Price: per piece -Dimensions: 115/210/H145 mm -Weight: 7 kg

Condition: used, Year of construction: 2013, machine/vehicle number: 81300019158, Kolbenpumpe und -kompressor für CTP Anlagen / Piston Pump and Compressor CTP Processor Thomas - Rietschle 2750BGHISS75Baujahr / Year 2013 - Serial-No. 081300019158 für CTP Anlagen (Beispiel Agfa) / for CTP Processors (examplae Agfa) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Godpfx Abjh Eg Txorouh On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Condition Used Stock Number 413046 This listing is for a Thomas 7100561 Vacuum Pump. The unit is in full working condition and is ready for immediate release. The Thomas 7100561 Piston Vacuum Pump is a top-tier dry-running WOB-L® piston pump, meticulously engineered for high-pressure applications. Its design prioritises low vibration and balanced flow, ensuring smooth operation while maintaining low power consumption, making it an excellent choice for energy-efficient workflows. Gujdpfx Abevmu Uqsreh Key Benefits:Precision Performance: Known for its reliability, this pump is ideal for demanding environments, catering to industries such as medical, laboratory, and environmental ressive Flow Rate: Achieves a maximum free flow rate of 212 l/min (7.5 cfm), allowing for efficient handling of various h Pressure Capabilities: Supports a maximum continuous pressure of 12.1 bar (175 psi), making it suitable for tasks requiring substantial pressure ong Vacuum Performance: Provides a maximum continuous vacuum of -990 mbar (29.2 ), ensuring effective suction for a variety of applications. Specifications:Type: Dry-running WOB-L® piston pumpApplications: Medical, laboratory, environmentalMaximum Free Flow Rate: 212 l/min (7.5 cfm)Maximum Continuous Pressure: 12.1 bar (175 psi)Maximum Continuous Vacuum: -990 mbar (29.2 )

Condition: used, Year of construction: 2005, cutting diameter 270 mm saw band length 2925 x 27 x 0.9 mm capacity 90 degrees: flat 350 x 240 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 230 x 150 mm capacity 60 degrees: round 140 mm capacity 60 degrees: flat 140 x 140 mm table height 740 mm cutting speed 36 + 72 m/min clamping range max. 355 mm total power requirement 2.0 kW weight 1180 kg range L-W-H 2150 x 2400 x 1900 mm Equipment: - Metal band saw - Fully automatic with one-sided miter adjustment - Multifunction digital control panel - Programmable work cycle - Help and self-diagnosis in the event of malfunctions - Coolant system Gusdpfx Abexaarwjreh - Saw blade guide with hard metal plates - Hydraulic saw frame lowering - Automatic raising and lowering - Band tension with pressure gauge - Hydraulic vice clamping - Operating instructions (ENG)

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. Guedpfxjth Taas Abreh 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: excellent (used), Used Bandsaw / Cutting-Off Machine – THOMAS TRAD 350 with Hydraulic Assisted Descent Machine in excellent condition – Made in Italy Perfect for cutting metal profiles and solid materials such as: • Structural steel • Heat-treated steel • Stainless steel • Aluminum • Brass General Features: • Sturdy steel frame with well-proportioned thickness and dimensions, entirely made by national manufacturers. • Hydraulic cylinder for assisted descent of the cutting bow with three operating modes: • Assisted descent with quick approach of the blade to the workpiece • Manual descent with constant speed • Manual descent with free speed • Vise group, rotation device, and cutting bow made from cast iron to ensure maximum strength and rigidity during operation • Generously sized rotating table for increased stability of the workpiece • Quick vise approach via dedicated lever • Hydraulic blade tensioning with pressure gauge and safety pressure switch to stop rotation in case of loose or broken blade • Blade guide group with tungsten carbide inserts and bearings to improve blade tracking and ensure perpendicular cutting • High-quality anti-corrosion treatment on blade guide components to ensure long durability and consistently perpendicular cuts • Integrated blade-cleaning brush Technical Specifications: • Maximum cutting capacity: 330 x 250 mm • Blade motor power (2 speeds): 1.4 / 1.8 kW • Power supply: 380 V – 50/60 Hz • Wheel diameter: 330 mm • Blade size: 2925 x 25 x 0.9 mm • Vise opening at 90°: max 330 mm • Vise opening at 45°: max 250 mm • Bow inclination: 30° • Working height from the ground: 700 mm • Machine dimensions (LxWxH): 2010 x 1330 x 2000 mm Godpsw Avm Sjfx Abrsuh • Weight: 430 kg

Condition: new, Thomas Super Trad 301 So Easy - Semi-automatic metal band saw Promotional price € 9,400 instead of € 11,100 excl. VAT - The SO EASY saw allows a complete cutting cycle without the operator being constantly present thanks to the hydraulic control system for lowering the saw frame - Hydraulic vice - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch for switching to MANUAL cutting mode with button for quick access to the material to be cut - Central control panel on the front of the machine with luminous alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting needs of medium-sized ferrous materials - Large round work table "plateau" that rotates with the miter of the saw blade and guarantees excellent support for the material to be cut. This system prevents the saw blade from cutting the work table, as is the case with conventional band saws. - Solid cast iron vice with handwheel and quick release lever - The vice is equipped with a practical handle for quick movements and is mounted on a rail to allow lateral movement - Cuts possible from 0 ° to 60 ° to the right and 45 ° to the left - Saw blade rotation with 2 electric speeds - Saw blade tensioning by handwheel and safety microswitch in case of blade breakage or insufficient blade tension - Coolant electric pump - Saw blade cleaning brush Specifications - Capacity round 0 °: 255 mm - Capacity round < 45 °: 160 mm - Capacity round 45 ° >: 200 mm - Capacity round 60 ° >: 110 mm - Capacity square 0 °: 250 mm - Capacity square < 45 °: 160 mm Gedpfsuzhpzsx Abrjuh - Capacity square 45 ° >: 190 mm - Capacity square 60 ° >: 110 mm - Capacity rectangle 0°: 300 x 220 mm - Capacity rectangle < 45°: 190 x 100 - 150 x 170 mm - Capacity rectangle 45° >: 190 x 170 mm - Capacity rectangle 60° >: 110 x 130 mm - Saw band dimensions: 2750 x 27 x 0.9 mm - Saw band speed: 33/66 m/min - Vice clamping width: 305 mm - Saw frame inclination: 30° - Working height: 940 mm - Gearbox reduction ratio: 40/1 I - Flywheel diameter: 300 mm - 3Ph electric motor: 1.0 - 1.4 kW - Electric pump: 0.11 kW - Machine dimensions WxHxD: 800 x 1600 x 1800 mm - Machine weight: 440 kg