Used Ciata Thi-50 for sale (87,930)

Condition: good (used), Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Benzlers, gearbox type 50 Bwolq Sdst N Aduo Ryel -Translation: 21 : 1 -Shaft: Ø 19 x 35 mm / hollow shaft Ø 25 x 100 mm -Quantity: 1 piece available -Dimensions: 180/98/H155 mm -Weight: 4.5 kg

Condition: used, Year of construction: 2013, x-travel 1300 mm y-travel 650 mm z-travel 625 mm control Fanuc weight of the machine ca. 9000 kg Bolq Sd Rowgi Dfsyowl

Condition: excellent (used), Year of construction: 1991, Long dressing tables Work tables made of gray cast iron Sturdy planer fence with hand crank, swivels 0 - 45 degrees Helical toothed feed roller on thickness planer Motor protection switch Thicknessing table height adjustment with handwheel Under-table roller Working width max. 500 mm Planing height 3 - 225 mm Planer table length 2300 mm Planing shaft DM 120 mm Number of planing knives 4 # Planing shaft speed 4500 rpm Motor power 4.0 kW, 400 V, 50 Hz 2 Feed speed 7 - 14 m/min Dimensions approx. L x W x H = 2300 x 850 x 1050 mm Weight approx. 900 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. Bslqsudx Tas Sd Ryjwl - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1971, Functionality: fully functional, The machine was fully overhauled by ABA Ltd. in year 2000. Since that time is was barelly used. Bwjlq Sdjwd I Has Ryol Working range 750 x 500 mm Table size 1150 x 400 mm Distance between table surface and spindle center 610 mm Longitudinal travel (hydraulic) 800 mm Cross travel (hydraulic) 450 mm Dimensions of wheel D350 x 40 x d127 mm Spindle power 6,8 kW Weight 3500 kgs Place required cca 3200 x 1800 mm High 2600 mm Accessories - Magnet table 750 x 400 mm with demagnetization - Coolant tank - Hydraulic unit - Automatic vertical infeed - Automatic cross infeed - Integrated dressing unit - Some flanges with wheels - Manuals

Condition: ready for operation (used), Year of construction: 2000, Available immediately from location: CNC Vertical Machining Center Mori Seiki Type MV 653/50 Year of manufacture 2000 CNC control Fanuc MSG 501 Table 1700 x 660 mm Table load 2 tons Travel X/Y/Z 1530 / 660 / 650 mm Distance spindle to table 200 – 850 mm Distance spindle to column 690 mm Adapter SK 50 Bwjlq Sjwganuod Rysl Spindle speeds up to 6000 rpm Main spindle drive 26/22 kW 40-station tool changer Internal coolant supply Feed rates 1 – 10,000 mm/min Rapid traverse 24 m/min Jog feed 0 – 1260 mm/min Overall drive 52.5 kVA Chip Conveyor Weight 16 tons Price: €10,000 plus VAT ex-works

Condition: good (used), Bookbinding screw press 50×40 on a base The device is fully functional, ready to work. Format 500×400 mm Bwolq Sd Rjwdrtkjyel Pressure 5t

Condition: excellent (used), TECHNICAL PARAMETERS: PLAIER - shaft width 400mm - 3-knife shaft - adjustable guide at an angle - length of tops 2200mm - both tops adjustable THICKNESSING MACHINE: - max. thickness of the processed element on the thicknesser 200mm - cover for the thicknesser shaft *from above: Bwolqewhgizj Sd Ryel pawls input shaft pulling, toothed, torsional pressures planing shaft pressure - output shaft pulling, smooth - main engine 4kW MACHINE DIMENSIONS: - length: 2200mm - width: 1300mm - height: 1200mm Weight 950 kg Where can you see our machines? JBS MACHINES WOODEN WOLICA DRUGA 26 23-310 MODLIBORZYCE There is a possibility of testing the machine on site The possibility of financing the machine through leasing or installments. WE ORGANIZE TRANSPORT

Condition: used, machine/vehicle number: 12216, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 300 x 500 mm Bwslq Sdjh D Imij Ryel Drive motor: 30 kW

Condition: ready for operation (used), Year of construction: 1992, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, overall weight: 13,000 kg, Fanuc OM BT50 spindle, 6000 rpm speed 40-tool changer 1700 x 650 mm table 1500 x 650 x 650 mm stroke 13,000 kg weight Bwslq Sdjv Rrgls Rysl

Year of construction: 2023, Condition: used, Technical details: liter capacity: 21 l/min Pressure of coolant: 50 bar rated current: 20 A Clean water tank capacity: 300 l total power requirement: 16 kW weight of the machine ca.: 200 Kg dimensions of the machine ca.: 1,2 x 0,8 x 1,4 m Bwjlsvfdmysq Sd Ryel We are importers for FRASCARA high pressure coolant systems Frascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min. We can provide up to 3 pressure levels controlled by M-Functions. Oil operated systems are available also. Areas of application: Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machines Function: The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 bar pump. When the filters are getting clogged, an alarm is triggered and the operator switches to the second filter bank. The first set of filters then can be cleaned while the system is in full operation. The filters are made of wire mesh and can be reused. The system is very quiet and extremely reliable! *

Condition: used, Year of construction: 2017, travel -x axis 730 mm travel -y axis 730 mm travel -z axis 800 mm control MAZATROL SmoothG max. workpiece diameter 800 mm workpiece height max. 1.000 mm tool adaptor SK50 number of spindle speeds 10.000 U/min plate size 500 x 500 mm table load 700 kg numbers of positions in the tool changer 120 Milling machining centers - horizontal | MAZAK - HCN-5000/50 equipped with chip conveyor, tool changer, measuring system and 2-way pallet changer. Bwelq Sdeuk Rl Ns Ryjl Scope of delivery : - Pallet station (TOTAL 10 pallets) - an extensive tool package Additional equipment: - Pallet changer: 2-way - NC rotary table (0,001° x 360.000 Positionen) The machine has been commissioned by MAZAK at the end of 2019 and has only 305 H spindle hours. The machine is in a very well-maintained, like-new condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HC-Nexus 5000 | HCN 5000-50 | HCN 5000 | HCN5000

Condition: used, mileage: 36,684 km, Year of construction: 2020, General information Field of application: Construction Serial number: 084 133 Drivetrain Drive: Wheel Weights Bslqstr H Tkj Sd Ryjwl Empty weight: 39.440 kg Functional Lifting capacity: 50.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Michellin Carrier engine: - Upper engine: - Upper hours: 4404 h Counterweight: 9000 Transport dimensions (LxWxH): 12.3x2.55x3.8 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: ready for operation (used), Year of construction: 2006, - USED - No 2 4-AXIS HORIZONTAL MACHINING CENTRES WITH 24 POSITIONS PALLET-SYSTEM X-AXIS TRAVEL: 730 mm Y-AXIS TRAVEL: 730 mm Z-AXIS TRAVEL: 850 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 830 mm RAPID FEEDS X-Y-Z: 50 m/min SPINDLE: 8000 rpm; 22-30 kW; ISO 50 - BT PALLET: CONTINUOUS ; 500x500 mm MAX ADMITTED LOAD: 500 Kg MAX MACHINABLE PIECE DIMENSIONS: ø 800 x 1000 mm HIGH PRESSURE COOLANT: 80 Bar TOOL MAGAZINE: CHAIN-TYPE ; 240 + 240 POS MAX TOOL DIAMETER: 125 (300) mm MAX TOOL LENGHT: 500 mm MAX TOOL WEIGHT: 30 Kg CONTROL UNIT: MSX 701 III ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; TOUCH PROBE ; Belqjlmq Nne Sd Ryowl PORTABLE HANDWHEEL NOTE: LPP LINEAR MULTI-PALLET SYSTEM WITH No 24 PALLET AND No 2 LOADING AND UNLOADING STATIONS

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Rotor width: 800 mm 5-blade rotor 2 rows of stator blades Inlet cross-section approx. 800 x 450 mm Bslq Sd Rsg H Nf Reyswl Drive motor: 55 kW

Condition: ready for operation (used), Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 600 mm, Vertical machining center Manufacturer: HURCO Bebmmvyoubcvtjhwslf Type: BMC 40 / 50 Travel: X-axis 1020 mm Y-axis 762 mm Z-axis 600 mm Table load: 1500 kg Table size 1465 x 870 mm Spindle speeds 30 - 4000 RPM 30-station tool changer Bolowag Tqoq Sd Ryjwl Tool-to-tool speed 8 sec. 2000 RPM Spindle mount SK 40 Voltage 400 Drive power 11.2 kW Weight 8000 kg Dimensions L x W x H = 3860 x 3315 x 2775 mm

Condition: excellent (used), Year of construction: 2003, conveyor belt length: 3,500 mm, conveyor belt width: 345 mm, Manufacturer: M.A.S.S. Length: Horizontal bottom: 60 cm Diagonal: 250 cm Belq Sdowangfj Ryewl Horizontal top: 50 cm Width: 34.5 cm

Condition: new, New appliance ENMAIR Dry air dryer EDD4-75/50 Appliance available at short notice Honeycomb principle (drying wheel) Bwslqou Ti T Ns Sd Rysl Drying container 120 liters (75 kg) Air flow rate 50m³ / hour Power consumption during drying 4 KW Power consumption during regeneration 3 KW Achievable dew point down to - 60°C Connection 400 Volt, 50 Hz Mobile on frame Height X width X depth 1670 X 1070 X 620 Weight 320 kg Optional: - Suction box for dry air dryer - Suction conveyor Enmair EML

Condition: excellent (used), Functionality: fully functional, Year of construction: 2006, operating hours: 1,038 h, load capacity: 6,000 kg, lifting height: 500 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,550 mm, motor manufacturer: Perkins, fork length: 1,200 mm, tire condition: 70 %, rear tire type: 300x15, rear tire size: 300x15, overall weight: 9,490 kg, empty load weight: 6,000 kg, total height: 3,410 mm, total length: 5,000 mm, total width: 2,000 mm, maximum load weight: 6,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and around the world. Bwjlqjwfxpho Sd Ryol

Condition: used, mileage: 503,588 km, power: 265 kW (360.30 HP), first registration: 01/2015, fuel type: diesel, color: other, axle configuration: 4x2, fuel: diesel, wheelbase: 3,700 mm, gearing type: automatic, emission class: euro6, Year of construction: 2015, Max. front axle load: 7500 kg Max. rear axle load: 11500 kg Number of cylinders: 6 Engine capacity: 10.677 cc GVW: 19.000 kg Max. towing weight: 44.000 kg Bwolqewcyuyo Sd Ryel Dimensions (LxW): 616 x 255 cm Number of seats: 2 Registration number: 19-BFL-8

Condition: used, Year of construction: 2007, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 3,700 mm, table width: 1,000 mm, table length: 3,220 mm, overall weight: 22,000 kg, spindle speed (max.): 7,000 rpm, distance table center to spindle nose: 890 mm, spindle motor power: 40 W, space requirement length: 6,500 mm, space requirement width: 5,000 mm, CONTROLS .. CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 2500 mm .. Y-axis travel: 1000 mm .. Z-axis travel: 770 mm .. distance spindle nose - table surface (max.): 890 mm TABLE .. table surface (left-right): 3220 mm .. table surface (front-back): 1000 mm .. workpiece load (max): 3500 kg Bwolqev Ux T To Sd Rysl SPINDLE / HEAD .. spindle revolutions (max): 7000 /min .. drive power: 40 kW TOOL MAGAZINE .. number of positions: 50 AUTOMATIC WORKLOAD EQUIPMENT .. store type: magazine ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6500 mm .. space requirements -front/back-: 5000 mm .. total height: 3700 mm .. total weight approx.: 22000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: no Machine comes without coolant system but with a high-pressure pump. The magnetic plates are not included but can be purchased if you are interested.

Condition: excellent (used), Year of construction: 1982, Planing width 500 mm 2-knife cutter block Planing height: 230 mm Steel feed roller, grooved Rubber feed roller 2 idler rollers in the table Motor 5.5 kW Bwolq Ssv Trmwsd Rysl Measurement scale for height adjustment via handwheel 2 feed speeds Weight approx. 900 kg Location: Arrives end of April, Lage 54634 Bitburg - Delivery as is - free on freight - No warranty - no guarantee -

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x800x1900 mm Weight 2400 kg Total power requirement 16 kw Bjlevz E Nusq Sd Ryswl

Condition: good (used), Year of construction: 2001, input voltage: 380 V, Used mixer with fixed stainless steel bowl, DALMAR 50, MFG 2001, made in Hungary, serial No. 01D045 bowl capacity of up to 50 kg dough, maximum power 2.2 kW, ideal for pizza and bread dough, operation with relatively low noise, bowl operation in 2 possible directions, operating time adjustable on the main working direction with the help of a timer, the timer is not running, metal frame /chassis cast, extremely stable, stainless steel safety cover, the cover is easy to open and close, the device stops after opening the safety cover (travel limiter), electrical connection: 3N/PE / N / PE 400V / 50 Hz Bolq Serb Dhqod Ryowl The mixer is produced according to the hygiene and safety regulations in force. The machine complies with European food standards. Benefits simple operation, easy to clean, very resistant and durable, despite its age, it has little electronics and the mechanical part is robust, it can have a very long life. External dimensions W x H x H: mm x mm x mm NOTE: the machine has been overhauled on the electrical and mechanical side. Sales price: 1.560 Euro + VAT, negotiable, FCA Oradea, Romania

Condition: used, Year of construction: 1989, machine/vehicle number: Syst.no. 105, Used roller conveyor from Mannesmann Demag. It has 4x 45° curves and 2x 90° curves, 3 straight sections, and a transition with guides. Feet are also included. If you are interested, please contact us and let us know which parts you are interested in. Thank you very much. Bslq Sowc A Nted Ryowl

Condition: used, Year of construction: 1989, machine/vehicle number: Syst.no. 105, Used roller conveyor from Mannesmann Dematic. It features several 90° curves, many straight sections, and transitions with guides, some of which are motor-driven, and includes numerous barcode scanners. Bslqswc Auio Sd Ryswl Feet can be ordered separately. Many spare parts (rollers, motor parts, hinges, cables, etc.) are in stock. If you are interested, please contact us and let us know which parts you are interested in. Thank you very much.