Used Pegas Gonda 290X290 A-Cnc-Lr-F for sale (16,780)

Condition: good (used), Grundfos TPD pumps are single-stage, tightly connected in-line centrifugal two-head pumps, Itedpfxjg I Utpo Abrjn with mechanical shaft seal and primarily for applications such as heating / cooling / district power. Type: TPD 80-330 / 2 A-F-A-BAQE Technical pump speed: 2930 rpm Nominal flow: 85.6 m³ / h Nominal lifting height: 25.9 m Maximum lifting height: 33 m Actual impeller diameter: 157 mm Materials Pump housing: Cast iron Impeller: Cast iron Material code: A Installation Ambient temperature range: -30 .. 60 ° C Maximum operating pressure: 16 bar Max. Pressure at the specified temperature: 16 bar / 140 ° C Connection size: DN 80 Pressure value for connection: PN 16 Port-to-port length: 440 mm Flange size for motor: FF300 Pump Transported liquid temperature range: 0 .. 120 ° C Density: 998.2 kg / m³ Electrical data Engine: Rated power - P2: 11 kW Mains frequency: 50 Hz Rated voltage: 3 x 380-415D / 660-690Y V Rated current: 12.0-11.8 A Starting current: 660-780% Rated speed: 2930 rpm Number of poles: 2 Housing classification (IEC 34-5): 55 Powder / Spray Insulation class (IEC 85): F Motor protection PTC Net weight: 303 kg Gross weight: 328 kg Purchase and purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: Iodpfxov Sfp Ae Abrjtn - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: used, Year of construction: 2019, x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens turning speed range - main spindle 10 - 10.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 70 / 48 Nm tool taper BT 40 table surface area 800 x 320 mm max. table load 300 kg T-slots 3x 14 x 100 mm distance spindle /table 100 - 600 mm number of toolpositions 12 pos. tool taper BT 40 max. tool diameter 70 mm max. tool weight 6,0 kg change-time tool to tool 7,0 sec Itjdpjww Nb Ssfx Abrjn rapid traverse ( X / Y / Z ) 10 m/min feed speeds max. 10.000 mm/min repeating accuracy +/- 0,008 mm positioning accuracy +/- 0,01 mm total power requirement 15 kVA weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - NEW MACHINE / SHOW-ROOM-MACHINE - alternative configuration available, optional and on request !

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Itedpfx Abexd Ay Eorsn Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 2016, Ref. -No.: 10569 Manufacturer: SORALUCE Type: TA - 35 A Year of construction: 2016 Type of control: CNC Control: Heidenhain TNC 640 / TNC 7 Storage location: Halberstadt X-Travel: 3500 mm Y-Travel: 1400 mm Z-Travel: 1500 mm Feed force (X, Y, Z): 10000 N A-Axis: 2,5 ° C-Axis: 2,5 ° Turning Speeds: 6000 / 7000 / 12000 / 30000 / 40000 RPM Max. Torque: 479 Nm Max. Workpiece Weight: 7,8 t Rapid Traverse X/Y/Z: 25 m / min Table-Size (Lxw): 3860 x 1200 mm Power Capacity: 32 kW Tool changer: 40 Swivel range milling head: 2,5 x 2,5 ° Table load max.: 10500 kg Tool Taper: ISO 50, DIN 69871 AD Tool places: 60 Feed rate: 10 - 25000 mm / min Weight: 19 t Number Of T-Slots: 8 Pcs Width of the T-slots: 22 H12 mm Distance between the grooves: 140 mm Chip conveyor: 2 Pcs Further information: - Universal milling head for processing at any angle - Compact design for installation without a separate foundation - The machine design was analyzed, developed and optimized using the finite element method (FEM). - Cast construction for maximum stability - DAS+R vibration damping for increased productivity - Highest precision for decades - Milling head types Universal milling head - Vertical milling head with fourth axis and high-frequency spindle - Electronic handwheel with cable or radio - Coolant type Coolant / air / air with MQL - Coolant system via spray ring and IKZ up to 70 bar Itjdpfow Uplksx Abrjn - Infinitely variable via Heidenhain AC servo motors including digital drive technology Machine can be inspected under power by arrangement.

Condition: excellent (used), Plane cutter head (28149) Make ISCAR Itjdsg Er H Hspfx Abron type F 90 A - D160-40 M Weight 5 kg

Condition: excellent (used), Manufacturer: Grundfos Type: NB80-250/220 A-F-A-BAQE Itodpfxsncd A Ns Abron Speed for pump data: 2940 rpm Rated flow: 73.1 m³/h Rated head: 57.6 m Actual impeller diameter: 222 mm Impeller nom: 250 mm Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 65 Pump outlet: DN 50 Pressure rating: PN 16 Net weight: 191 kg Gross weight: 216 kg

Condition: excellent (used), mileage: 497,000 km, power: 235 kW (319.51 HP), fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 7,250 mm, Year of construction: 2012, Equipment: air conditioning, cruise control, = More options and accessories = - Aluminium fuel tank - Brake booster - Electric windows - Electrically adjustable exterior mirrors - Low noise - Speed limiter - Air suspension - Radio/CD player - Reversing camera - Sunshade - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication - Central locking = More information = Ijdpfx Absut Drnorjtn General information Year of manufacture: Oct 2012 Model year: 2012 Axle configuration Suspension: Air suspension Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle; Steered Functional Crane: FASSI F 315 A.2.26, year of manufacture 2012, behind the cabin Brand of the body: FASSI F 315 A.2.26 CE marking: yes Condition Technical condition: very good Visual condition: very good

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight Iodpfx Abjxdwndsretn - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: new, Brand new, never used. Iedpfx Absw Dgiysrjtn

Condition: used, For sale: the tool milling machine shown in the photos, manufactured by the German company Deckel, model FP3A. The machine offers manual, semi-automatic, and automatic operation modes. Controlled via G-codes. Control type: CNC 2102 Deckel. Itodpfx Abexluu Roron

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Bundle saw with chain conveyor for direct discharge into container, spare parts available Itodpsxgr R Ssfx Abrsn

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN:51095 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Iedei D Iqkepfx Abrotn

Condition: excellent (used), Year of construction: 2007, Biesse Rover A3.30 CNC machining center. This CNC machining center is designed for high-precision woodworking applications and is equipped with a working area of 3060 x 1260 mm Working field in X: 3060 mm Working field in Y: 1260 mm Loadable piece: 150 mm X-Y-Z axis speed: 80 - 80 - 25 m/min Electrospindle: ISO 30 Rotation speed: 20000 rpm Tool magazine: 18 positions Installed power: 17 kVA Working air pressure: 7 - 7.5 bar Ijdpfx Abewtr Nkeretn Vacuum pump: 100 m³/h

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 4017, overall weight: 4,200 kg, - Year of manufacture: 1990 - 1st owner and from own use, well maintained - Fully functional, powered, ready for demonstration - X-axis travel: 160 mm - Z-axis travel: 590 mm - Swing diameter over bed: Ø520 mm - Swing diameter over cross slide: Ø350 mm - Centre distance: 625 mm - Machining diameter: Ø230 mm - Max. machining length: 550 mm - Number of tool stations: 12 - Main spindle motor: 15/11 kW Itedpoxgt Acjfx Abron - Control: Fanuc Series O-T - Dimensions: 2860x1520x1750 mm – 4200 kg Net price unloaded ex location Luckenwalde (Germany), without transport

Condition: good (used), Year of construction: 2004, Pfäffle F 64 a Automatic Punching Machine For automatic and continuous punching of binding perforations for loose leaf binding, filing hole systems, corner rounding, index cutting and other edge perforations. Including the punching tools Iodpfx Abeu T Dixsrstn Technical details Max. paper size 420 x 420 mm Min. paper size 210 x 100 mm Punching thickness up to 2 mm Punching speed 4.200 – 5.000 punch operations/hour Punching capacity up to 8 m paper pile / hour Electrical equipment 230/400 V; 3 phase; 50/60 cy; 0,75 kW Required floor space 1,80 m x 0,90 m 2,10 x 1,00 m Weight 600 kg

Condition: used, Year of construction: 1997, max. module 2,5 min. module 0,3 control Fanuc 16 M current 19 A total power requirement 12 kVA weight of the machine ca. 5,5 t Manufacturer PFAUTER MIKRON Model A 15 CNC Equipment: - CNC Siemens 840 C - Wet and oil machining are both possible - Manual and electrical circuit diagram High quality and stability, combined with corresponding performance data and modern CNC technology, make the A 15 CNC the ideal gear hobbing machine. The short changeover times also allow economical small series production. The impressive quality of Pfauter-Mikorn products guarantees you a trouble-free production process and a long service life for your machine. --> Technical data max. millable module for hobbing: 2.5 mm --> max. millable module for high-performance milling: 2.0 mm --> Number of teeth: 1 - 999 teeth Workpiece data: --> max workpiece Ø automatic loading: 60 mm --> max workpiece Ø manual loading: 100 mm --> max workpiece length automatic loading: 200 mm --> max workpiece length manual loading: 300 mm Working paths: --> X-axis (infeed): 66 mm --> Y-axis (milling length): 150 mm --> Y-axis (shifting): 100 mm --> A-axis swivelling angle (milling head): 50°/50° --> Quill stroke: 110 mm Feed speed: Isdpsvu E Nnofx Abrjtn --> X-axis: 0 - 6,000 mm/min --> Z-axis: 0 - 6,000 mm/min --> Y-axis: 0 - 4,000 mm/min Speed range: --> B-axis (milling cutter): 200 - 4,000 min-1 --> C-axis (workpiece): 0 - 375 min-1 Milling performance: --> Motor power 50% ED (B-axis): 3.7 kW Travelling stick: --> max. clamping force: 9 kN --> infeed path: 205 mm Headstock: --> mounting: mechanical --> spindle passage: 32 mm --> Spindle axis from floor: 1200 mm --> Hydraulic operating pressure: 50 bar

Condition: new, overall weight: 14,000 kg, empty load weight: 3,100 kg, maximum load weight: 10,900 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,630 mm, loading space height: 813 mm, suspension: air, tire size: 285/70R19.5, color: silver, Year of construction: 2021, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 2 axles, BPW axles, tandem, air-sprung, lifting + lowering, ABS (anti-lock braking system), lashing eyes, front support, rear support, drawbar height adjustable Ijdpji Rrvvsfx Abrstn Construction: for demountable containers, drum brakes, hot-dip galvanized, load securing, BPW axles type KMBMH 7008! 10.9t payload, pre-installation for attachable ramps for transporting construction machinery. The loading area of our pre-run trailers can be extended on request and for an additional charge! German production! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN: 58102 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Itjdei D Iqropfx Abrsn

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: well-maintained Point-to-point drilling machine Working width: 800 mm with grooving unit Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle in X direction 1 drilling spindle in Y direction Grooving saw unit in X direction 3-axis control system X: NC-controlled feed of the panel via cross-over pneumatic clamping gripper Y: NC-controlled drilling movement Z: NC-controlled drill spindle depth adjustment Pneumatic roller hold-downs in the infeed area Pneumatic clamping gripper for transport DXF interface 15" color screen Keyboard including mouse Network card USB interface Max. panel width: 950 mm Max. drilling width: 800 mm Max. machining width for back panel grooves: 600 mm Max. feed speed (X axis): 30 m/min Max. drill diameter: 35 mm Ijdpfxjw Tfxqe Abretn Max. overall drill length: 70 mm Connected load: 2.5 kW Extraction port: 100 mm Required pressure: 6 bar Working height: 900 mm Machine dimensions (LxW): 1650 x 2100 mm Availability: approx. October 2025 Location: Selfkant

Condition: used, Year of construction: 2000, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: T 90077, turning length: 450 mm, turning diameter: 230 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, - Year of manufacture: 2000 - Single owner, used in-house - Fully functional, under power, ready for demonstration - Operating hours: 17,200 h - X-axis travel: 200 mm - Z-axis travel: 450 mm - Turning diameter: 230 mm - Turning length: 450 mm - Spindle speed: 4,000 rpm - Spindle bore: 52 mm - Spindle motor power: 11 kW - Control: Fanuc 21 i Iodpfx Aboxgtrkerjtn - Tailstock - 12-station VDI 30 turret - Chip conveyor - Weight: 2,800 kg Net price ex-works, unloaded, from location Luckenwalde (Germany), excluding transport

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), Grundfos TPE 80-250/2 S-A-F-A-BQQE-MD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: Q: 90 m3/h H: 21,7 m P: 7,5 kW n: 2910 1/min Good working condition. Please check out our other listings as well. Itedpfxjtp A Ste Abren

Condition: new, Indramat MAC112B-0-GD-3-F/130-A-0/S0054 Permanent Magnet Motor , S.No. MAC112-80864, unused in opened original box, 100% working ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Itodpfx Aji D Ip Rebrjn

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: DN50 flanges 345mm between flanges Q = 35.1m3/h Itodpfxotp A Shj Abren H = 33.9m n= 2920 /min Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Indramat MAC 112D-0-FG-3-F/180-A-0/S011 Servo motor SN:71378 ,used, strong traces of use, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itodpfxoi D Ikao Abren