Used Pegas Gonda 290X320 Shi-Lr-F for sale (25,712)

Condition: ready for operation (used), Year of construction: 2014, cutting diameter 360 mm capacity 90 degrees: flat 500 x 350 mm capacity 45 degrees: round 360 mm capacity 45 degrees: flat 420 x 300 mm capacity 60 degrees: round 300 mm capacity 60 degrees: flat 300 x 200 mm turning speed range: 20 - 100 m/min dimensions of saw-band 4780 x 34 x 1.1 mm engine output 3.0 kW Control SPS weight 740 kg range L-W-H 2800 x 1080 x 2340 mm In good condition Chjdpfox A H Tyox Adusf Current new price approx. 17.000 euros Special price on request Features: - Robust electro-hydraulic semi-automatic band sawing machine (INDUSTRY) * For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals, and plastic - with miter cuts from 60° right to 60° left * Cutting angle fixed via quick-release lever - Swiveling control panel with NC “SPS MITSUBISHI” control - Infinitely variable saw blade speed - Saw blade guide with adjustable carbide plates for precise cutting - With robust three-phase motor with overload protection - Saw blade drive with low-maintenance, oil-lubricated worm gear - With mechanical saw blade tensioning and monitoring - Chip removal brush for optimum cleaning and maintenance of the saw blade - Coolant device - 1x replacement saw blade - Operating instructions

Condition: used, Year of construction: 2012, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat 240 x 150 mm capacity 45 degrees: round 240 mm capacity 60 degrees: flat 150 x 180 mm capacity 60 degrees: round 150 mm turning speed range: 35 + 70 m/min saw band length 3100 x 27 x 0.9 mm Codpfsxiyzkox Adushf weight of the machine ca. 540 kg range L-W-H 1800 x 950 x 2100 mm Features: - Robust electro-hydraulic band saw (INDUSTRY) - Large mounted rotary table * For miter cuts from 45° left to 60° right - Automatic saw frame lowering * With continuously adjustable feed * End stop at end of cut - 2x saw blade speeds - Manual vice clamping - Control panel - front right - Coolant device - Operating instructions in German

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m Cjdpfxsxz Dqme Aduehf • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, 2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication. B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL. Any type of inspection is of course allowed. We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears. The rubber rollers are vitrified and need to be replaced. The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion. Some specs, for all specs open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing surface 350 x 510 mm Rubber cloth size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening rollers in this case of film dampening is 1 (62mm) Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm Inlay stack height maximum 850 mm Cedpfjv Nv Tasx Aduohf Explanation stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Power consumption in total 7kW Primary fuse in any case 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: good (used), The scope of delivery includes: 01x crash barrier, used f. Double rack rows Total length: approx. 2,500 mm Total height: approx. 400 mm Total depth: approx. 305 mm Consisting of each: 02x L collision protection corners, used Material color: orange Total height: approx. 400 mm Total depth: approx. 305 mm Chsdsvawqbjpfx Aduef Total width: approx. 265 mm Material thickness: approx. 4.00 mm 01x U-rails, used Material color: orange Total length: 2,480 mm U-profile: 100 x 50 mm Oblong hole: 40 x 15 mm Material thickness: approx. 6.00 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: ready for operation (used), INA YRT F-229093 Radial bearing for Supfina machine, the item has been overhauled, used, good condition, 100% working, scope of delivery as per photos Cjdpfx Asulqh Hsduohf

Condition: ready for operation (used), Year of construction: 2007, Brand: Sorbini Model: VS/33-ACT-F Machine no.: MP1SCO27052 Year of manufacture: 2007 Chodpfx Adsxtal Deuof Compressed pneumatic air Pneumatic propellers Motor: 1.6 kW Weight: 1150 kg Stock no.: 2002709BXA

Condition: excellent (used), Year of construction: 2005, I sell the 4-Side brushing machine suitable for windows, doors, tables, etc. Futura MS120 Y1 X2, year 2005 Working width 1200mm Working height 200mm Total weight 2500kg Codpfx Aed Raqksdushf Configuration: Side brushing heads left - right H.170mm 2 bottom heads left - right Nylon W.140mm Oscillating top head W.260mm Big brushing heads top - bottom W.1150mm Machine equipped with heads on the pictures. Available immediately.

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for packing press 180P2 capacity up to 2 000 kg/h power: elevator 2,2 kW mill 4 kW electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2,000 mm width 700 mm height 2,400 mm insertion resp. discharge height 800 mm Chsdjb Nccbopfx Adusf weight 290 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1 460 mm suitable for pomaceous fruit scope of delivery 12 mm cutting screen

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for belt presses EBP500, EBP650 and EBP820 capacity up to 2 000 kg/h power: elevator 2,2 kW mill 4,0 (5,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: Chsdpeb Ncc Dsfx Aduef length 2 000 mm width 700 mm height 2 400 mm insertion resp. discharge height 800 mm weight 285 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1 500 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen

Condition: new, capacity up to 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 900 mm Chodpjb Ncmmofx Adujf height 2 450 / 2 700 mm insertion resp. discharge height 800 mm weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 2 “ outside mash discharge height 1 380 mm suitable for pomaceous fruit scope of delivery 12 mm cutting screen

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for packing presse 100P2 with Rotary Cage capacity up to 2 000 kg/h power: elevator 2,2 kW (3 PS) mill 4 kW electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2,000 mm width 700 mm height 2,200 mm insertion resp. discharge height 800 mm weight 285 kg material 1.4301 / AISI 304 connections: Chjdpfx Aob Ncb Neduof connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1 260 mm suitable for pomaceous fruit scope of delivery 12 mm cutting screen

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for single belt press EBP420, EBP500, EBP580 capacity up to 2 000 kg/h power: elevator 2,2 kW Csdpfsb Ncmfex Aduohf mill 4,0 (5,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2,000 mm width 700 mm height 2,200 mm insertion resp. discharge height 800 mm weight 280 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1,250 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 651 mm, total length: 998 mm, total width: 522 mm, Tested forklift battery for your truck – 48V 5PZS 625Ah – DIN C + 1 year warranty + Includes aquamatic system + Includes end connector & REMA 320 plug (other plugs available on request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,214 mm Width 420 mm Height 627 mm Weight: approx. 890 kg Suitable for the following models and more: Still RX 20-20 Jungheinrich EFG 318 EX Jungheinrich EFG 320 Crown SC Crown SC 3016 Crown SCT 60 Atlet ET 180 Atlet ET-15L Cjdpfowzvwnsx Aduehf Caterpillar EP16 Caterpillar EP16CPN Caterpillar EP16CPNT Caterpillar EP16KT Caterpillar EP16NT Caterpillar EP 18CPNT Caterpillar EP18E Caterpillar EP20NT Cesab BLITZ318/418 Daewoo B16 X Daewoo B18 T Daewoo B18 T-5 Daewoo B20 T Doosan B18 Doosan B18T-7 Doosan BT18 Doosan BT18T Doosan BT18T-5 Hangcha CPD25-J Hyster E1.50XM Hyster E1.50XMS Hyster J1.60XMT Hyundai 18BT-7 Hyundai 18BT-9 Hyundai 20B-9 Hyundai 20BT-7 Hyundai 20BT-9 Jecam ELECTRO WAGEN Komatsu FB18 Mitsubishi FB16ACNT Mitsubishi FB16CPNT Mitsubishi FB16K Mitsubishi FB16KT Mitsubishi FB16NT Mitsubishi FB16PNT Mitsubishi FB18KT Mitsubishi FB18NT Mitsubishi FB20PNT Mitsubishi FBS15 Mitsubishi FBS18 Mitsubishi RB14 Mitsubishi RB16 Nichiyu FBT15-18 Nissan AG1N1L20Q Nissan G1N1 Nissan TX16 Yale ERC 18 Yale ERP 18 Popular battery sizes available – please enquire. Transport available.

Condition: good (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system Cjdpfx Adsx A H T Hsuohf * Special accessories included: - 1x PEGAS chip conveyor

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Csdex Aw Egspfx Adushf Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), empty load weight: 1,300 kg, x als gemotoriseerd Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Csdpfexpgfiex Adushf Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z': 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Chjdpfowl Ncfjx Aduof Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, General Data Measurements width 1460 mm Measurements depth 5370 mm Measurements height 2060 mm Clamping Unit Clamping force 1600 kN Additional Equipment Chodpfxoxy Anne Adusf Sepro Robot SDR 11 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized total length: approx. 200 mm total width: approx. 80 mm opening dimension: approx. 42 x 37 mm (WxH) for rectangular tube: 40 x 35 mm hole spacing: approx. 50 mm number of drill holes: approx. 2 pieces drill holeØ: approx. 9 mm material thickness: approx. 3,00 mm weight/pc.: 0,320 kg Your contact person in our company: Cjdpfxepbcfge Aduohf Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, General Data Measurements width 1810 mm Measurements depth 6950 mm Measurements height 2213 mm Machine weight 15750 kg Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 350 ton Media Internal cooling Yes Additional Equipment Fanuc Robot This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Cjdpfx Adexy Anujuohf Application Types Injection Moulding

Condition: new, Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery are 04x shelf support, new Chodpfx Aeh Iy R Hjduef Manufacturer: Mauser Material color: sendzimir galvanized material thickness: approx. 1,2 mm total height: approx. 43 mm total width: approx. 11 mm Weight/ pcs. approx. 0,008 Kg General information about the article: This item is offered for pickup only. A desired transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, General Data Measurements width 1260 mm Measurements depth 6460 mm Measurements height 2100 mm Clamping Unit Clamping force 2200 kN Chjdpfexy Anzox Adujf Additional Equipment Sepro Robot SDR 22 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding

Condition: used, Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you 100 used depth requirements of the manufacturer Nedcon to purchase. Csdodqkf Ispfx Aduohf This depth Edition is suitable also for other manufacturers. Technical data to the depth requirement: Shelf system: Nedcon Type: NS In the scope of delivery included: 100xTiefenauflagen, used Material color: compl. zinc-plated f. stand depth: 800 mm Overall length: 800 mm clear span width: 710 mm C-Profilabm.: approx. 60 x 50 mm Traverse Edition: approx 40 mm Material thickness: 2.0 mm Weight / unit: 1,983 kg Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge)

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stud depth: approx. 1,100 mm Chsdpfx Adowl Ulljuof Clear span: approx. 1,000 mm Profile dimensions: K 100 x 50 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 5.42 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.