Used Pegas Gonda 290X290 A-Cnc-F for sale (14,513)

Condition: excellent (used), Year of construction: 2013, Description For sale is a working and very well-maintained Weishaupt gas burner, including a gas line (DN 65). 1. Burner type: WM-G30 Power: 600-5700 kW Bslqewgbq Djyx Nhswl Version: ZM Year of manufacture: 2013 Connection pressure: 15-500 mbar

Year of construction: 1999, Condition: good (used), PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Bwelshqhw Ioqyx Nhsl Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Bwolqyx Nop U Umkshsl

Condition: good (used), The scope of delivery includes: 1x used wooden plank Total width: approx. 2,470 mm Total depth: approx. 1,450 mm Bwjlqyxov U U I Hs Nhol Clear span: approx. 1,340 mm for stud depth: approx. 1,450 mm Traverse support: approx. 55 mm Board thickness: approx. 20 mm Board width: 135 or 110 mm Weight per piece: 33.40 kg Your contact persons: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including HR 520 handwheel Machine hours Machine under power: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours of current milling spindle: approx. 150 h X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Belqyxowa T Hke Nhewl Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Working table Clamping area: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives X/Y/Z axis feed rate: up to 60 m/min X/Y/Z axis acceleration: up to 5 m/s² The machine is currently set to the following default values because there was insufficient power available on site! X/Y axis feed rate: up to 40 m/min Z axis feed rate: up to 30 m/min X/Y/Z axis acceleration: up to 2.5 m/s² Connection data Connected load: 190 kVa Back-up fuse: approx. 315 A The machine can be reset to its original values at any time if sufficient power is available. The following reduced connection values apply: Connected load: 130 kVA Back-up fuse: approx. 250 A Dimensions, weight Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 fluorescent green Description: Additional equipment - Coolant supply with belt filter system - 50-station chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the machine Fully functional, in very good condition. Already disassembled and stored.

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder year 2005 Bwjlqyxjwcgdne Nhol used - efficient

Year of construction: 2025, Condition: new, machine/vehicle number: 1533, Work surface 3500 x 1500 mm (Inner frame dimensions approx. 3400 x 1400 mm) Folding table with 12 mm tabletop Bslqyx Nsd Rzl Uehjwl for space-saving installation Becker vacuum pump with 1.25 kW motor, 400 V, 50 Hz Vacuum pump flow rate 40 m³/h Tank capacity 100 l Natural rubber membrane with 700% stretchability Max. component height approx. 600 mm External dimensions approx. 3600 x 1650 x 1000 mm Including chassis with 4 swivel casters Weight approx. 440 kg without transport, ex warehouse Seevetal, Subject to prior sale

Condition: used, Year of construction: 2015, travel distance X-axis: 630 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: 840 D SL, CONTROLS .. CNC controls SIEMENS 840 D SL TECHNISCHE DATEN .. .. max.: 18000 /min .. .. to: 30000 m/min .. .. to: 30000 m/min WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 630 mm .. Y-axis travel: 465 mm .. Z-axis travel: 630 mm .. rotating range C-axis from: 70 ° .. rotating range C-axis up to: -250 ° ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz X,Y,Z linear axes CU Gentry A Rotation axis SK50 n=1000 1/min C axis = -70 +250 Operating hours 21`700 h Equipment: - CNC software V04.07+SP 04 - PLC basic program: 04.07.23 - Workpiece - Renishaw MP250 probe - Tool - Renishaw LP2 probe - Dittel balancing system P6001 - Dittel structure-borne sound system DM6000 - Haas-CU, including automation - Haas robot cell CU - Siemens 840 DSL handheld control unit - Expansion of pallet racks Repairs: Bolqyxovyln Us Nhewl - Linear guides X-axis would have to be changed

Condition: excellent (used), CNC INFOTEC Machining center Model: 3121 3-axis Year of production: 2016 Machine working area dimensions for axes X and Y: X: 2200 mm Y: 3100 mm Head stroke in the Z axis: 250 mm Bwolqyxeun Rqye Nhsl Machine working speed X, Y, Z: X: 60m/min Y:60m/min Z:12m/min Vacuum table Price of a new machine: approx. 75.000 € Price: 27.900 €

Condition: good (used), The scope of delivery includes: 1x used wooden plank Total width: approx. 2,170 mm Total depth: approx. 1,450 mm Clear span: approx. 1,340 mm for stud depth: approx. 1,450 mm Traverse support: approx. 55 mm Board thickness: approx. 20 mm Board width: 135 or 110 mm Weight per piece: 29.38 kg Bjlqysv U Tbfex Nhswl Your contact persons: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: new, Year of construction: 2024, This is a state-of-the-art CNC machine dedicated to the industrial sector, used for cutting sheets and profiles, using a plasma torch. The machine is characterised, among other things, by a robust structure made of the highest quality steel and aluminium, a large cutting range, the possibility of cutting workpieces of any shape and low process costs. The high-end solutions used in production ensure reliable and safe operation. The cutting of the material is carried out in a short time, while maintaining the precision of the workpiece. In order to obtain the desired shape, it is only necessary to import the file into the software, so operation of this cutting machine is easy and intuitive. Our plasma cutting machines are primarily designed to process materials such as: - Black steel, - Stainless steel, CONSTRUCTION The frame of the plasma cutting machine is designed and manufactured from scratch in our factory. The high quality steel used for the machines is cut, then welded and machined. The entire frame, gantry and gantry arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Servo AC motors with high resolution and power have been used to drive our cutters, ensuring adequate acceleration and speed in each direction. These are highly dynamic and precise motors with feedback, guaranteeing zero defect by continuously controlling the operating parameters. The X and Y axes use classic and well-proven helical bars, which ensure long life and precision. FUEL Our plasma machines use components from the leading manufacturer PGCNC. The technologies used in the torch significantly increase productivity and cutting speed. HD technology provides better hole quality, increased piercing capacity and bevelling capabilities. This ensures high quality, repeatable cuts and maximises productivity with minimal running costs and reliability. KNIFE TABLE Bwelqyx Nsur R Erohel The knife table is made with technology that is resistant to working at elevated temperatures. This allows us to work continuously without worrying about the occurrence of burn-outs that prevent the material from being evenly positioned on the work table. The positioning of the scissors can be easily changed according to the size of the workpieces to be burnt. The knife table is an excellent solution for cutting thicker materials. SOFTWARE The machine is equipped with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import finished designs in vector formats: .dxf, .plt, .ai, .eps. The programme ensures fast and precise development of cutting paths. PLASMA SOURCE The basic plasma equipment includes the 120A cutting system, which is characterized by high productivity and cutting quality and speed. AUTOMATIC LUBRICATION SYSTEM Plasma cutting machine equipment also includes an automatic lubrication system that minimizes machine maintenance. The central lubrication system is a simple and functional device used to supply grease to the places where machine and equipment components come into contact. - POWER 400V 50Hz - MAX SPEED 45 m/min - DOOR SHAPE 200-600 mm - TYPE OF WORKING TABLE Knife table - WORKING TABLE WEIGHT 500 kg/m2

Condition: like new (used), We offer a new and used screw compressors, air dryers, line filters, air tanks, pneumatic components, air cylinders, and compressor maintenance and spare parts. Compressors available in 2.2kw - 500kw.  The compressors we sell are ALL maintained and in good condition. All compressors have a warranty of at least 2 months. We sell only quality brands such as Alup, Kaeser, Atlas Copco, Compair, Ceccato, Almig and so on. Bjlqysfiug Sjx Nhewl If you are interested please feel free to contact us!

Condition: new, Year of construction: 2024, Professional CO2 laser with a 600mm x 900mm work table and a tube with a rated power of 80W reaching 90W at peak! The standard equipment includes a CW5000 liquid cooler, a compressor for blowing the lens and material, and a smoke extractor. Model: 6090G Working area: 600x900mm (pass-through table in the Y axis) Rated laser power: 80W Laser power at peak: 90W Tube type/laser type: Glass CO2 laser tube Cooling type: Closed-circuit water cooling - CW5000 cooler Max. engraving speed: 800mm/s Suggested max. cutting speed: 400mm/s Max. Cutting thickness: up to 15mm depending on material and parameters Min. engraving size for letters: 1mm x 1mm Bwoljtvmh Djqyx Nhel Engraving precision: 2500DPI Repeatability: +-0.01mm NEW – Controller and motherboard: Ruida RDC6445G - a module with advanced functions providing advanced control over parameters and the processing process Supported graphic forms: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported interface: WiFi, USB Color separation: Yes Drive system: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15mm linear guides by PMI Standard equipment: PURI 80-90W laser tube Fume extraction and piping CW5000 cooler Table knife rigid, stable steel honeycomb table Blowing compressor Power source: 230V, 50-60Hz Working environment: Temperature 0-45oC, Humidity 5-95% (non-condensed) Weight 209.65 kg + accessories ~ 20 kg Dimensions: 142x120x105 cm Machine designed for cutting and engraving in materials such as: Acrylic, leather, rubber (e.g. stamps), wood, wood derivatives, plastics, textiles, clothing, leather, glass (engraving only), marble/stones (engraving only, cardboard, ceramics (engraving only), paper, etc., coated metals (e.g. pens).

Condition: ready for operation (used), controller manufacturer: Heidenhain, total length: 7,045 mm, total height: 4,495 mm, net weight: 32,000 kg, total depth: 5,910 mm, Dwarsbeweging van de tafel (X): 2000 mm Verticale beweging van de kop (Y): 1250 mm Beweging van de spindel (B): 800 mm Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 1250 mm Travel Z-axe: 2000 mm Dimensions clamping space- table: 1800 x 2200 mm Power on spindle: 37 kW Admission in millinghead (ISO): ISO 50 (dia 130 mm) Max quill travel Z': 800 mm Max speedrange: 10 > 1800 rpm Bslqev Tak Djyx Nhewl

Condition: excellent (used), 5-axis Year of production: 2018 Bwoloun Rqgeqyx Nhel Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: good (used), Year of construction: 2015, Automatic double-blade miter saw Manufacturer: A+ automation Type: T300/T350 auto Bolqyx Novrcbcjhowl Year of manufacture: 2015 Retrofit in 2023 Including vertical loader Including conveyor belt for removal High-speed, high-quality cuts with up to 500 frames/hour ä230425

Condition: reconditioned (used), Year of construction: 2002, Functionality: fully functional, load capacity: 20,000 kg, Container rotating device with a load capacity of 20 tons and a speed indicator for pipe diameters from 250 mm to 4600 mm 2 remote controls Infinitely adjustable speed and roller spacing Bwolqyxev Uk H Se Nhel One side with dual drive One side with revolving drive (axle adjustment electric with spindle, automatic with remote control)

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, CUT 2530S - Variable CNC Machine Bwelqyxewfdm Es Nhsl EPS cutting machine with 4 independent moving axes and variable machine table.

Condition: new, Year of construction: 2025, operating hours: 3 h, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative Technology where it makes sense for our customer. Are surface spraying machine is equipped with No. 2 traverses and can paint material up to 200mm high and 1.800mm wide (standard is 100mm x 1.300mm). Belqyxjffc Tyj Nhewl We can offer it with 1-2 paint circles for easy color management. It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Year of construction: 2020, Condition: good (used), Frame Assembly Machine Manufacturer: A+ Automation Type: A5 MemoTS Year of Manufacture: 2020 This machine was designed for production frame builders who require fast assembly and frequent changeovers. Its state-of-the-art technology allows you to store a virtually endless number of programs. Bslqyx Nju Sy T Djhjwl The programs can be entered by the operator or downloaded from a PC. After saving this information, the operator can select the frame to be produced via the touchscreen or by scanning with the optional barcode reader. The machine automatically adjusts, and production can resume immediately. Wedges can be driven or stacked in up to 14 positions per corner. It is a very fast and reliable machine. It can be used to assemble all types of wood, plastic, and MDF. It can connect any type of molding using special A+ steel wedges, which are manufactured in several sizes. The horizontal, vertical, and stop clamps allow for very precise tightening of the frames. A robust wedge driver ensures trouble-free operation. All types of wood, plastic, and MDF can be joined together. ä170425

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, Functionality: fully functional, working width: 400 mm, power: 1.5 kW (2.04 HP), compressed air connection: 8 bar, - DEMO machine from our technicial center for special price! - Since 1970 Ceetec A/S produces wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Bwslqyxjffc Ras Nhsl Our brush painting machine A250 is equipped with flood nozzles for painting all around and with up to 8 brushes (each 2 per side) and can paint wood for interior and exterior on all four sides in one shift. Speed: 16-42m/min max. height: 250mm max. width: 250mm resp. 380mm (A380) min. length: 800mm It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: new, Year of construction: 2025, Since 1970 Ceetec A/S produces innovative wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our CNC linear spraying machine is equipped with 3-4 traverses which are controlled by the easy to use touchscreen. We can offer it with 1-2 paint circles for easy color management. Further specification: - painting dimensions: 100 x 400mm (heigth x width) - speed: 10 - 200m/min - capacitiy: up to nearly 12.000 running meter per hour - power connection: 400VAC (other system on request) - air connection: 8bar air pressure - made for painting 5 sides, 6 sides painting optinal possible Bwslqyxsffc Uno Nhjl It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: new, Year of construction: 2025, Functionality: fully functional, space requirement width: 3,200 mm, space requirement length: 1,200 mm, space requirement height: 2,100 mm, overall weight: 170 kg, As the official and exclusive distributor of Ceetec for the German-speaking countries, I am pleased to present you our extremely robust horde trolley. Due to their construction, they are very well suited for use in conjunction with our automatic painting machines, which also process the reverse side at the same time. Depending on the version, the trolleys can be loaded up to 2,000kg without any problems, as they are made of galvanized steel. The standard trolleys are available in 1,50 and 3,00m length and each in double-sided and single-sided loading. On request, we can also build your own individual trolley according to your wishes. The height between the individual layers is 135mm, but can be increased very easily by pulling out individual spars (secured by cotter pins). Braked heavy-duty castors ensure a secure stand and easy movement on solid ground even when loaded. The trolleys are usually available directly from stock. To save shipping costs for our customers we pack the trolleys pre-assembled (see picture). The setting up is done very quickly. Do you have any questions? Contact us, we are happy to help! The indicated net price refers to the version in 1.50m length plus shipping costs (individual, because forwarding). Bwslqyefiuhvjx Nhol Sale exclusively to traders (B2B).

Condition: new, Year of construction: 2025, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our innovative drying systems are available in longitudinal and transversal version and can be combined with all our painting machines. Bwelqyx Njffc Ufehel We can also add IR-stripes for faster drying apart from the hot air drying (heated by hot water). You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. The machines will be configured and build according to the wishes of You. Delivery time on request. Do You have further questions? Please feel free to contact us whenever You want!

Condition: as good as new (ex-display), Year of construction: 2022, This small Ceetec module can be used in combination with all Ceetec A250 brush painting machines in order to create a better adhesion on e.g. Larch wood in compination with thick paint. It can also be used with nylon brushes to clean the sawn wood before painting in order to keep out the dirt. Bwjlqysfiugqsx Nhol Recommended to use in combination with a small exhaustion unit. Comes without brushing head and sanding material, can be added on request. Do You have further questions? Please feel free to contact us whenever You want!