Used All-Kor Akb S500 for sale (22,942)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Auction of a Kornit Allegro textile printer! The machine is still in operation and can be inspected in the Paderborn area until week 30. After being dismantled in week 30, the machine will be stored. The machine will be made available for free loading in the Wuppertal area. EQUIPMENT Djdpjzkvh Aefx Aitskp ACS dryer Material feed Material removal Caldera RIP software

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a powerful textile printing machine that offers outstanding print quality, high speed and versatility. It is particularly suitable for textile printing companies that want to produce first-class prints in large quantities (roll-to-roll) on a wide variety of fabrics. To date, it has been used primarily for cotton fabrics: jersey, French terry, cotton woven fabrics, canvas, sweat and viscose & modal qualities. For sale due to business downsizing. The textile printing machine is currently still in operation and can be viewed at any time by appointment. The following are available for sale with the machine: main and backup air compressors, dryer, unwinder & rewinder. So a complete production line. Dkodovmdw Ijpfx Aitsp We are also selling all available spare parts, colors, etc. Technical specifications: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, magenta, yellow, black, red, green, gray Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pre-treatment) Print width up to 180 cm Print speed: Up to 200m²/ hour Print modes: Multiple print modes from 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes in interlaced mode Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveyor system Fabric feed system: Axial unwinding device with adjustable fabric width and Tensioning mechanisms Max media thickness: 15 mm Max roll width 180 cm Max roll outer diameter: 40 cm Max roll weight: 50 kg Compressed air: 6-8 bar/ < 0.4 m³/min

Condition: excellent (used), Year of construction: 1993, machine/vehicle number: MIKA 38106 107 122 113 - 144 145, Technical data: 1 ABUS LS pillar jib crane, rated load 500 kg Crane available in 6 identical versions!!! Rated load at full outreach: 500 kg / 0.5 t Height: approx. 4.05 m, lower edge of jib: approx. 3.5 m Outreach: approx. 2.5 m, hook height: approx. 3.2 m Total weight: approx. 500 kg Fitted with 500 kg Abus chain hoist with push-button pendant control (2 lifting speeds) Dkjdpfx Aexvmt Hoitjp Connection: 400V 16A, slewing range 270° Crane is dismantled and packed on pallet Good condition, see pictures Only the crane system visible in the pictures is being sold Shipping via freight forwarder or collection by appointment

Condition: used, Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 8945646465, total width: 2,000 mm, total length: 12,000 mm, total height: 1,800 mm, overall weight: 3,500 kg, air demand: 1 m³/h, ASAP Digital textile printing machine, pigments inks, GOTS and Oekotex 100, class baby articles, printing width 1.80m Technical specifications - Ink type: Kornit NeoPigment™ Intenso, water-based - Color channels: 7 (CMYK + Red, Green, Grey) - Pre-treatment: integrated 8th channel - Print heads: 64x Spectra Polaris (recirculating) - Print width: up to 180 cm - Print speed: up to 200 m²/h - Print resolution: 400–1200 dpi (recommended 600 x 600 dpi, 6-pass, interlaced) - Ink capacity: 4 liters per color - Weight: approx. 3,500 kg - Power supply: 3-phase, 25 kW, 110/220 V, 50/60 Hz Dkedpsw Tynmjfx Aitsp

Condition: excellent (used), Punching tools for window construction -various types: AM -9333/9352-1/9335/9334/94-234907 -Sale: only complete set -Total weight: 50 kg Dkjdpfxob A Iicj Aitsp

Year of construction: 1998, condition: used, Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic Dkedpfx Aijb A Hq Nstsp -Year of construction: 1998 -Type: 270164-1

Year of construction: 1998, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated Dodpfeb A Hwaox Aitskp -Year of manufacture: 1998

Year of construction: 2000, condition: used, Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine, pneumatic hole punch -Manufacturer: All Mecanic, multifunctional punch -Type: 994.500-1 - Execution: pneumatically operated, with foot control -Punching tool: see photos Djdpfx Aisgurw Estokp -Dimensions: 400/270 / H370 mm -Weight: 28 kg

Condition: excellent (used), Suitable for filling a massive variety of products, for example; fertilizer pellets, toner powder, cat litter, granulated or powdered pet food, whole and ground coffee, sugar, plant food, powdered foods, plastic granules, ground spices, flaked spices, fine cut tobacco, whole and ground pepper, detergent powder, flour, infant formula, cake mix, matcha powder, cosmetic powder, curry powder, seeds, salt products, rice products, lentils, breadcrumbs etc. Dkjdpfx Aisw H Adretjp

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, working width: 1,600 mm, installation height: 430 mm, throat depth: 400 mm, operating speed: 50 mm/s, reverse speed: 200 mm/s, back gauge speed R-axis: 200 mm/s, overall weight: 3,500 kg, total length: 2,350 mm, total width: 1,700 mm, total height: 2,220 mm, power: 17.3 kW (23.52 HP), warranty duration: 24 months, Equipment: CE marking, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 Dkjdpfxewzqx Ho Aitop X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: excellent (used), Year of construction: 2019, operating hours: 288 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 1,100 kg, type of input current: three-phase, input voltage: 400 V, pressure: 4,000 bar, positioning speed: 6,000 m/min, water pressure: 4 bar, power: 37 kW (50.31 HP), Waterjet Cutting System All-Powerful Science & Technology Stock Co., Ltd APW 3015 BA Year of manufacture: 2019 Lightly used, very good condition Operating hours: 288 cutting hours, 2203 operating hours Travel distance X: 3000 mm Travel distance Y: 1500 mm Travel distance Z: 150 mm Maximum feed rate: 6000 mm/min Maximum pressure: 410 MPa (4100 bar) Continuous operating pressure: 340-360 MPa (3400-3600 bar) Swiveling cutting head, deflection range 0-10° Cutting accuracy: ± 0.1 mm The components used are from well-known manufacturers, e.g. SKF, Yaskawa, TBI Motion, etc. The high-pressure pump is from A&V Waterjet Tech Inc. USA A second, unused spare high-pressure pump is also installed. Machine dimensions, cutting table: 4200 x 2800 mm Space required for cutting table & control & pump & water filtration system and abrasive feed system approx. 6 x 5 m Water requirement for cutting at least 3.7 l/min, recommended 10 l/min Maximum workpiece weight: 250 kg/m² Axis drives: AC servo Pump power: 37 kW Connection: 400 V, 3-phase Dkjdezh Eq Uepfx Aitop Special accessories, included in the price: Spare high-pressure pump Positioning laser Collision protection Air conditioning unit for oil cooling CAM software with part placement 4 clamping units 1500 kg abrasive blasting sand Removable protective covers Wastewater filtration system with filter fleece (Matchling MCL-P5N) Spare parts and wear parts set The machine is located in a precision engineering workshop. The protective covers reduce dust levels. Optional Commissioning, price based on effort Basic training, price based on effort

Condition: used, first registration: 02/2017, color: other, Year of construction: 2017, Axle 1: left mm right mm Axle 2: left mm right mm Axle 3: left mm right mm Dksdpfx Ajza D Droitep We have the possibility to stack trailers!

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ Dkedpfxjydnigo Aitsp • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: good (used), Year of construction: 2013, It was disassembled from a working machine, all is working. All cards shown in the picture are for sale. Djdpfx Aieurk E Sstskp

Condition: used, Year of construction: 2009, For sale: Band-All BA32-102 Banding Tool The Band-All BA32-102 is a high-quality, durable banding tool designed for heavy-duty applications. It efficiently secures bundles with precision, offering ease of use and long-lasting performance. Perfect for industrial and commercial use, this tool ensures a tight and secure band every time. In excellent condition and ready for immediate use. Dodpfx Aiev Sq Hyetjkp Contact for more details or to arrange a viewing! For sale: Band-All BA32-102 Banding Tool

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Dodsx Eiq Hjpfx Aitekp Year of manufacture: 1998 Serial number: 173062 Control system: Arburg Selogica Screw diameter: 18 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-500-100 Year of manufacture: 2011 Dedpfxsx Eithe Aitskp Serial number: 218960 Control system: Control type: Arburg Selogica Clamping unit: Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270S-500-60 Year of manufacture: 1997 Dksdpfx Asx Eiq Toitop Serial number: 170175 Control system: Arburg Selogica Clamping force: 500 kN Screw diameter: 15 mm

Year of construction: 2007, condition: like new (used), Offered from an insolvency sale is an operational punching machine. Manufacturer: All Mecanic Model: 994592 Year of manufacture: 2007 Machine No.: 905245 Dkodpfx Aied En Nfjtep The punching machine is still unused! Pneumatic foot control +3000mm stop, part no. 994895 +2000mm stop, part no. 994894

Condition: new, Year of construction: 2024, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Dsdpfx Aijhwrlxetekp Cooling Mode: WATER COOLING

Condition: good (used), mileage: 35,076 km, color: black, lifting height: 37,000 mm, Year of construction: 2016, operating hours: 3,725 h, Drivetrain Drive: Wheel Make of engine: MAN Weights Empty weight: 7.490 kg Functional Lifting capacity: 4.000 kg CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Dodpfx Aioy Sguxotokp Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Maximum lifting capacity at end of jib: 250 kg Emission level: Stage VI / Tier VI Delivery terms: EXW Latest inspection: 2025-04-14 Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Böcker AK 37/4000 montiert auf einen MAN TGL 7.180 with passenger basket, construction year 2016 with only 35.076 km and 3.725 hours. This vehicle is in nice condition (has been well maintained over the years) and has among other things: a passenger basket, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: used, mileage: 1,455 km, color: orange, lifting height: 27,000 mm, Year of construction: 2004, operating hours: 1,455 h, General information Field of application: Construction Djdpfx Aszb Iayeitjkp Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.200 kg CE mark: yes History Number of owners: 1 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Delivery terms: EXW Upper hours: 1455 h Production country: DE Additional information Please contact Michael Overmeer for more information Böcker AHK 27/1200 trailer crane construction year 2004 with only 1.455 hours from the first owner. Machine is in a nice condition and equipped with a Honda benzine engine and has among other things: first paint, hydraulic wheel drive, hydraulically support legs, remote control. Changes and typographical errors reserved.

Condition: excellent (used), JBT Stein All Purpose Batter dipper, 400mm wide. Has only been used in a test facility. The complete line is available - consists of two batter dippers, preduster, crumber, batter mixer, fryer, oil tank and nitrogen tunnel. Dksdpfx Aijx Nbd Aotep

Condition: new, Working width: 2540 mm Bending capacity (St42): 3.5 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 25 mm Hydraulic motor drive power: 3.7 kW Weight, approx.: 3900 kg Dimensions LxWxH, approx.: 3850 x 1700 x 1860 mm Djdjqa Ad Iopfx Aitskp The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

Condition: new, Working width: 2035 mm Bending capacity (St42): 6.5 mm Bending angle adjustment from/to: 0 - 135° Dkjdpfsqa Aa Iex Aitop Adjustability of the bending beam: 35 mm Hydraulic motor drive power: 7.4 kW Weight, approx.: 3710 kg Dimensions LxWxH, approx.: 3300 x 1550 x 1900 mm The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE