Used Ajce Ab-100M for sale (88,138)

Condition: used, diameter 400 - 550 mm bore 90 - 95 mm Various used face plates: Face plate 1 = 500 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 2 = 550 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 3 Röhm = 400 mm, short taper Din 55027 Gr. 6 = € 470.00 Face plate 4 = 315 mm, short taper Din 55027 Gr. 6 = € 260.00 Jaws can only be adjusted individually via threaded spindles. Machine dealer with own stock of 1600 m². Cgolreu U T Tcofqdljt

Year of construction: 1994, Condition: used, Technical details: plate thickness: 1,0 mm tube diameter: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm wall strength: 0,6 / 0,7 / 1,0 mm tube pipe draw up length: 150 - 1000 mm control for program: SPS Simatic S 5 air pressure - required: 5 bar voltage: 380 V control voltage: 24 V total power requirement: 3,5 kW dimensions L x W x H: 1,2 x 1,0 x 1,6 m Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually -operation via control panel Cgjlrfqju Icv Ajdljt further features: Sheet thicknesses: 0.6 / 0.7 / 1.0mm workpiece length 150 - 1000mm various accessories/tools for tube Ø 110 / 120 and 130mm optionally available per tool set 150 EUR / set *

Condition: excellent (used), Double bevel saw, manufacturer Häberle AL 350. machine in very good condition. Cgjlrfqdeudpltslot

Condition: good (used), Year of construction: 2019, Rear-loading panel saw with panel turntable Celrjv Aiaajfqdljgt

Condition: used, Functionality: unexamined, machine/vehicle number: GER-078, load capacity: 10,000 kg, Cable-operated workpiece manipulator with a 10,000 kg load capacity Max. workpiece width: 2,000 mm Cgjlrfowbflhjqdlet Total dimensions: 5,860 x 800 x 1,400 mm Weight: 3,090 kg Max. load capacity: 10,000 kg Max. workpiece width: 2,000 mm

Condition: used, Year of construction: 2001, back gauge: 500 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 1,000 mm, Hydraulic Guillotine Shear Manufacturer: RABBA Type: HS 6/1000 Year of Manufacture: 2001 Technical Specifications Manufacturer: RABBA Type: HS 6/1000 Year of Manufacture: 2001 Usable Length: 1000 mm Sheet Thickness: 6 mm Dimensions: L 1.50 x W 1.70 x H 1.60 m Weight: 1.6 t Features • Manual backgauge 500 mm • Angle stop All information is subject to change. A demonstration is available at any time in our showroom. Cslrsv I T N Nefqdljgt

Condition: used, Functionality: fully functional, Year of construction: 2011, load capacity: 22,000 kg, construction width: 6,000 mm, net weight: 3,165 kg, Accessories Load center: 750 Cgslrfqsu Dz R Dodlst Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: 2x forks: 250 x 80 x 2 400 mm

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; Cgelrfqdog In Azjlst competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Folding bench RED-2200 / 0.8 including transport rollers Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to him, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - bending capacity: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending capacity - Bending angle: max. 145 degrees - Folding beam thickness: 15 m - lifting the top beam in three positions - Upper beam stroke: 80 mm Degree scale Angle stop rear frame to hold the sheet metal front depth stops - Weight: approx. 250 kg The roller shears (max. Cutting performance 0.8 mm / steel) plus 350 euros - Hand folding machine plus 75 euros The machine complies with the CE guidelines and has a 12 month guarantee. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Year of construction: 2021, Condition: like new (used), Coolant system / belt filter system 980L Manufacturer: Bürener Maschinenfabrik Condition: new Cgjlrfqdjv Hcynslot Equipment: 40 bar high-pressure pump + 2 additional pumps for chip flushing, double changeover filter for fine filtration

Condition: used, Year of construction: 2001, grinding length 1000 mm Cgslrfqdjvvcdxelst grinding width 600 mm

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Hydraulic presses for gluing of construction timber, blockboards Small space requirement and front loading Chassis on wheels, two of which are steerable are steerable Height-adjustable hydraulic cylinders with practical and functional Vertically adjustable uprights Cjljkwhb Hjrfqdlsgt with frame pressing device Technical data: Work surfaces: 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Pressure of the hydraulic cylinders with manual adjustment: 1500 kg Positioning dimensions approx. 3200 x 800 x 2200 mm Location: Hochheim Availability: short term

Condition: good (used), Year of construction: 2003, Functionality: fully functional, Used Labelmen PW180 DL HNC 2003 [Ref: L180]. This machine is still being sold my the manufacturer. If you purchase, you can receive free of charge and older version of this machine without a servo. Cgelrfqdjrqhcnsljt A UV lamp is also available for sale for 1500 eur to be used with this machine, as well as a rewind unit for 3000 eur.

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Extraction system for dry grinding or similar dust-generating work. Very good condition, virtually unused. All documentation and a Euro pallet with filter material included. Stored ready for loading, available for immediate delivery. Approx. 3 m high. The system is photographed lying down... Csljwa Szmsrfqdlegt

Condition: good (used), Year of construction: 2002, overall weight: 5,900 kg, pressing force: 63 t, Model: PREN-63 Year: 2002 Cgjlreuifr Hsfqdlot Weight: 5900 Kg Nominal force: 63Tn Type: Pneumatic clutch eccentric Normal stop position (PMS): 650mm Closing height (PMI): 350 mm Travel: 10-100 mm Motor: 5,5Kw 380V 50Hz Max. carriage adjustment: 65mm Air pressure: min. 3,5 max. 6 bars Total stopping time: 278ms Safety distance: 445 mm Maximum RPM at flywheel: 600

Year of construction: 2022, Condition: like new (used), Coolant system / belt filter system 980L Manufacturer: Bürener Maschinenfabrik Condition: new Cgelrsv Hbv Ujfqdljt Equipment: 80 bar high-pressure pump + 2 additional pumps for chip flushing, frequency control for high-pressure pump to adjust the pressure, double switchover filter for fine filtration

Condition: new, Functionality: fully functional, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO produce Cement Silos from 50 to 2000 tons for stocking various tonnages of cement. Silos can be produced as welded or bolted according to your preference. For the continuation of production in a seamless way, FABO provide required units to get more than basic Cement Silo; level gauge, pressure relief valve and these kind of equipment. CEMENT SILO: Capacity: 50-2000 TONS (BOLTED) Silo Filters: 24,5 m2 surface area (WAM Brand) Silo Safety Valve : - (WAM Brand) Level Indicators 2 pcs/Silo, Brand: WAM, Model: ILTC220, Colrfqdewfckislsgt Fludifier Nozzle : 3 pcs/silo, Brand:WAM, Model: U025 Mechanical Valve and Arm : (WAM Brand) Silo charging pipe : Ø 114 mm steel pipe. FOR FURTHER INFORMATION, PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2020, Condition: used, BJ 2020 Body + drive without filter u belt Cgolelgw E Rerfqdljt

Condition: good (used), Electric motor, three-phase motor, fan motor, external rotor motor for fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, electric motor fan motor external rotor motor -Type: MK 115-GDK.12.N -Power: 0.35 KW / 380 V -Speed: 1400/1020/710 rpm -Protection class: IP 54 -Dimensions: Ø 190 x 170 mm Cjlsv Ibb Hjrfqdlogt -Weight: 11.1 kg

Year of construction: 2016, Condition: reconditioned (used), With warranty, electrically overhauled, condition checked -Max. temperature: 1400 °C -Furnace chamber volume: 120 liters -Interior 500 x 500 x 500 mm (W x D x H) -Exterior 890 x 1180 x 1470 mm (W x D x H) -P470 controller, 50 programs with 40 segments each -Electrically driven flaps -Intake air fan -Including exhaust hood -Visualization via logos (network connection, evaluations) -Dependent weight 370 kg -Documentation Cslrovk R I Iefqdlegt Visit to our warehouse upon request. Furnaces, annealing furnaces, industrial furnaces, chamber furnaces, firing furnaces, curing furnaces, tempering furnaces, laboratory furnaces

Year of construction: 2004, Condition: good (used), ABUS GM4 500.8-1 electric hoist, second hand Capacity: 500kg Chain length: 32m Length of push-button panel: 22m Year: 2004 Speeds: 2 (2m/min. - 8m/min.) Cgslreudwdkjfqdlot Motor: Three phase 380V Power: 0,9KW

Year of construction: 2006, Condition: used, Refurbished, electrically tested, 12-month warranty, pictures to follow -With hinged door facing downwards for hot removal -Maximum temperature: 1280°C -Electrically heated -Capacity: 60 liters -Inner dimensions of furnace: W x D x H 350 x 750 x 250 mm -Controller B150 (1 program with 2 segments) -3-sided heating -With gas supply box, gas piping is routed through the upper part of the door collar -Inner dimensions of gas supply box: W x D x H 280 x 500 x 200 mm -Power: 20 kW -Weight: 400 kg -Documentation Cgolrfqdov E Izbjlot Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace

Condition: good (used), Year of construction: 2002, overall weight: 9,500 kg, pressing force: 100 t, Model: PREN-100 Celrfeuif Tkeqdlsgt Year: 2002 Weight: 9.500 Kg Rated force: 100Tn Type: Pneumatic clutch eccentric Stop position: 580mm Closing height: 450mm Maximum flywheel RPM: 500mm Travel: 13-130mm Max. carriage adjustment: 80mm Motor: 11 Kw 380 V 50 Hz Min. air pressure : 3,5 - 6 bars Stopping time: 285ms Safety distance: 486 mm

Year of construction: 2024, Condition: as good as new (ex-display), 12 months warranty, exhibition machine, new device -Model on wheels -Max. temperature: 300 °C -Volume of furnace chamber: 1050 liters -Exterior: 1470 x 970 x 1920 mm (W x D x H) -Furnace chamber: 1200 x 670 x 1400 mm (W x D x H) -Controller C550 10 programs each with 20 steps -VCD process documentation (CD) Evaluation via Nabertherm VCD software with Ethernet port, Software for visualization, control and documentation Additional equipment: -Feedthrough for thermocouples I-Ø 44 mm -Horizontal, forced air circulation results in a Temperature uniformity according to DIN 17052-1 of better than +/− 5°C in the empty usable space (with the exhaust air flap closed) -Permissible Batch weight: 250 kg with distributed load -Load per grid: 30 kg with distributed load -Reinforced floors and strips for 80 kg distributed load available on request -Gratings included in delivery: 4 pieces -Max. number of grids 14 pieces, available at short notice -Connection power: max 9.3 KW -Fan output: approx. 500 m³/h Celroiqkr Isfqdlsgt -Connection: 380-415V 3/N/PE 50 Hz -Own weight: 450 kg -Documentation, CE declaration Packaging on pallet 170 x 135 x 210 cm 450 kg The oven is not to be used for solvent-based substances or for heating food, animals, wood, grain, etc. Oven, ovens, industrial oven, heating cabinet, heating oven, laboratory oven, drying oven, tempering oven, test cabinet

Condition: good (used), ABUS GM4 500.8-1 electric hoist second hand Capacity: 500 kg Chain length: 32m Length of pushbutton panel: 22m Year: 2004 Cjlrjudwbiefqdlegt Speeds: 1

Year of construction: 1985, Condition: good (used), Used high chamber furnace - Tmax 1280°C - Capacity 5000 liters Cgslrfqdohwwltelet - Internal dimensions: w x d x h 1250 x 1250 x 3200 mm - External dimensions w x d x h 1600 x 2200 x 4000 mm - dead weight 7000 kg - Rated power 198 KW - Documentation Inspection possible at any time by appointment. Kiln, Furnaces, Hardening furnace, Annealing furnace, Industrial furnace, Chamber furnace, Firing furnace, Curing furnace, Tempering furnace, Chamber furnace, Chamber dryer