Used Ajce Ab-100M for sale (88,141)

Condition: used, Year of construction: 1963, Functionality: fully functional, Equipment: type plate available, For sale are automatic polishing machines from HAU and Metabo. Metabo 7777 SL63-44 HAU HR4 10948 HAU SMP P850 plus accessories/spare parts See layout plan and photos total weight 4.5 - 5.3 tons. These have been located in 58-100 Świdnica in Lower Silesia, present-day Poland, since 2019. Until 2019, they were used in ongoing production in the Munich area and then brought to Poland for further use. However, the project in Poland was never implemented. Pricing: PHOTO 58-100 Świdnica, Poland, lashed to pallets. Viewing by appointment. The photos are from the original location in Munich. The pallet photos are from 58-100 Świdnica. Coliq Aov Ux I Roprjgt Net price plus VAT. Sale to businesses only, warranty excluded.

Condition: used, sheet width - max. 170 mm plate thickness 3,4 mm angle steel/side length 50 mm weight of the machine ca. 70 kg dimensions of the machine ca. 0,7 x 0,16 x 2,1 m Cjljv Dxzijiq Aprogt Is cutting flat steel, L-beam, Scorper, round and square material. Machine dealer with own stock of 1600 m².

Year of construction: 2002, Condition: good (used), Functionality: fully functional, machine/vehicle number: D795724 0010, H4000xL4500mm Cgjliq Apov S Dvnsrot

Condition: new, Year of construction: 2025, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Cgolowck N Ijiq Apret

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 8420 438/1999, rotational speed (max.): 1,538 rpm, input voltage: 460 V, input current: 815 A, type of input current: DC, overall weight: 1,340 kg, type of cooling: air, protection type (IP code): IP23, DC electric motor 351kW ABB DMG 280 S after renovation - ready to work. We can send more photos. Cgjliq Apevaiv Asrjt

Year of construction: 1990, Condition: good (used), Somab CNC lathe Type: Unimab-500 Control unit: Somab PL+5 Turningdiameter bed: 500 mm Turningdiameter support: 300 mm Cjlisigl Taeq Aprogt Spindle bore: 72 mm Turning length: 1500 mm Speed max: 2500 RPM Diameter faceplate: 320 mm Power: 18 KW Year: 1990 Included central lubrication system and coolant pump Dimensions: 340x180x175 cm LxWxH Weight: ca 6500 KG

Condition: ready for operation (used), ABB GJR5137200R0005 35AE92F-E 9065 electronic module, used, normal signs of use, 100% functional, scope of delivery as per photos Cgsliqei D Trrj Aprot

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, type of input current: AC, Will sell apple peeler and corer with ring attachment ABL PDS 50. Year of construction is 2008. Machine is sold WITHOUT shufflo (waterbath apple dispencer) and catwalk. Machine can make peeled or unpeeled slices (controlled via electronic switch), 8-12 slicer per apple (depends on apple diameter) which is determend by swaping cutting pieces. Minimum apple diameter: 60mm Maximum apple diameter: 90mm (conditionally 95mm) Capacity: 50 pcs / minute It requires compressed air of 10 bar and AC 240V power. Csliqowagnho Aprsgt Machine is ready for use. Videos: youtube.com/shorts/5GgOgmha_yM?feature=share youtube.com/shorts/eALORs24Dew

Year of construction: 2003, Condition: excellent (used), For sale Nabertherm N650/G furnace Furnace in very good condition with shelves and frame. Technical data: Capacity 650 L Power: 26 KW Voltage: 400 V Current intensity: 37.5 A Max temp: 900 degrees Celsius Chamber dimensions width 70 cm depth 85 cm height 110 cm External dimensions width 112.5 cm depth 155 cm height 192 cm Nabertherm C40 controller Cgjliq Asvrg Sljprst

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 200-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1000x1000 mm Cgelov Ic Nfjiq Apret CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 40 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2008, Offer 23354 Hydraulic Welding Turntable and Tilt Table – Three Axis – Welding Positioner Technical Specifications: - Maximum load capacity 1500 kg - Faceplate diameter 700 mm Csliqov Tkxfj Aprjgt - Minimum table height in horizontal position approx. 780 mm - Maximum table height in horizontal position approx. 1300 mm - Working height manually adjustable in 3 steps - Faceplate motorized rotation - Faceplate hydraulically swivels or tilts + height adjustable - Electric rotation movement Continuously adjustable speed approx. 0.01 - 2.0 rpm - Right and left rotation - Welding current transmission approx. 500 A - 400 V drive - Connected load 2.5 kvA - Hand-held remote control for speed - Electric foot switch - Space requirement approx. W 1600 x H 780 x D 850 mm - Weight approx. 750 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 8,635 h, overall weight: 1,750 kg, load capacity: 180 kg, arm reach: 3,150 mm, Slightly used ABB IRB 660 industrial robot. Csliq Aev T Rfloprsgt Comes with IRC5 controller.

Condition: ready for operation (used), ABB GJR5146900R0101 35CS91 9112 electronic module, used, normal signs of use, 100% functional, scope of delivery as per photos Cgeliq Apsi D Tryerot

Condition: good (used), Nagel Citoborma 480AB Paper Drill Device in very good condition. Four drilling heads. Technical data: Cgjliq Asv H T Sujpret Drill distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal. Solid construction on a pedestal. Drill table adjustable in every plane. This is one of the latest Citoborma models. The set includes operating tools, instructions, new stick + drills.

Condition: good (used), Year of construction: 1970, Magnetic surface: 1250 x 400 mm Grinding area: 1250 x 500 mm Dimensions LxWxH: 3700 x 1600 x 2500 mm Csliq Apsvt A Hherogt Machine weight: approx. 4500 kg

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 100 h, Functionality: fully functional, overall weight: 50 kg, total width: 508 mm, total length: 686 mm, total height: 991 mm, input voltage: 240 V, tank capacity: 38 l, noise level: 68 dB, input current: 5 A, Equipment: chassis, type plate available, Dynabrade 61431 Raptor Vac Electric Portable Vacuum System, 230V (ATEX Cat. 3 for Zone 22) SYSTEM INCLUDES: • Two 6 m (20') conductive coaxial hoses with integrated air lines • "Y" connectors • Two composite couplings • Two swivel adapters for vacuum hoses • Disposable collection bag • Conductive polybag Cgsliq Apsv Uxxcerst • ATEX Category 3 for Zone 22, suitable for areas where hazardous dust is not normally suspended in the air in ignitable concentrations, but may accidentally occur. • Designed for general purpose spot extraction and cleaning. • Powerful suction power, ideal for industrial applications with dry materials. • The bypass motor system uses clean air to cool the motor, extending the life of the vacuum. • Includes HEPA H14 filter with 99.995% efficiency at 0.3 microns. • Two additional HEPA filters in the motor head, making it IP6X rated. • High-quality stainless steel housing and 38-liter collection container. • Unit is static dissipative (kit included) and conductive. • Aerosol leak test performed for quality assurance. • Equipped with a smooth-running trolley. • Protection against dust explosions. DYNABRADE Description: Safety and fine dust capture are the specialty of Raptor Vac Category 3 Clean Air Solutions. From the motor head to the collection container, every component plays a role in fire prevention and fine dust capture. Category 3 Raptor Vacs are used to vacuum non-metallic dusts such as wood, composite materials, and plastics generated during sanding operations. The powerful extraction supports two operators simultaneously in dry industrial applications. Two additional HEPA filters in the unit make it IP6X rated and provide additional dust protection for electrical components. IP6X - defined as completely dustproof tested.

Condition: like new (used), Frequenzumrichter Manufacturer: ABB Celieq Abxuoq Aprogt Type: ACS880-07-0650A Power: 355 / 250 kW Dimensions: 830 x 700 x 2200mm

Condition: like new (used), Year of construction: 2023, operating hours: 700 h, Functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, rotational speed (min.): 1 rpm, rotational speed (max.): 25,000 rpm, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, 4 Machines Available with identical configuration. Each machine ahs less than 700 spindle hours !!! Horizontal twin-table machining center with 2 spindles SPECIAL MACHINE FEATURES -Monobloc design -Linear and torque motor in the feed axes -Gantry drive in the Y axis -Mass optimized machining unit Box-in-open-Box -Workspindle optionally with HSK A40 or HSK E40 taper -Double swivel carrier with 2 integrated rotary axes for in-cycle loading / unloading -Trend-setting technologies that boost energy efficiency -Central workstation Description The BA W02-22 is a horizontal, twin-spindle machining center. Mainly used for 4- and 5-axis machining of small non-ferrous metal workpieces. The linear and torque motors of the feed axes guarantee with a maximum workpiece accuracy, the highest possible dynamics and very short non-productive times. In order to ensure loading and unloading in parallel to the machining time, the BA W02 is equipped with a double swivel trunnion Cgjlju Im Enjiq Aprjt Linear motors The use of linear motors in the feed axes X, Y and Z makes it possible to achieve speeds of 120 m/min (X- and Y-axis) and accelerations up to 22 m/s² (Z-axis). Linear motors have significant advantages over conventional drives with ball screws in terms of energy, wear and noise emissions. Three-phase synchronous motors are used in the BA W02-22. Workspindle Two different motor spindle types are available with HSK 40 interface for the BA W02-22. HSK A40, 25,000 rpm: This synchronous motor spindle features high dynamics. It has a core spindle with a very low mass moment of inertia. This allows for a very short run-up time to a maximum speed of 25,000 rpm with a constant high torque. This results in a consistently short chip-to-chip time over a speed range up to 10,000 rpm and best times for thread cutting. TECHNICAL DESCRIPTION OF STANDARD MACHINE - BA W02-22 WORKING RANGE linear axes Spindle distance 250 mm X axis 200 mm Y axis (tool change position) 350 mm (525mm) Z axis 300 mm WORKPIECE CARRIER A/U Swivel carrier system with plane surface gear teeth (Q-axis) Swivel time 0° / 180° 2.25 s Max. asymmetrical loading Repeatability accuracy relative to 500 mm 0.005 mm Two independent rotary axes (A-axis/U-axis), suitable for holding clamping bridges. The rotary axes, each consisting of a directly driven NC rotary tables with direct and absolute angle measurement and a counter bearing Max. dimension of fixture/workpiece 425mm x 630mm Max. weight of fixture/workpiece 160kg Peak torque (standard) 420 Nm WORKSPINDLE HSK A40 Liquid-cooled motor spindle based on AC synchronous technology Speed range 1-25,000 rpm

Year of construction: 2021, operating hours: 360 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 124921T4092C, Tabarelli T4092c material handler equipped with a 500L GUSELLA BAKKER grapple. Deutz 95kW (130hp) 4-cylinder 3.6L diesel engine. Common Rail Injection - Turbocharged - Stage 5 emission standard. Fan reverse flow - 170L fuel tank. 24V electrical system - 2x 100Ah batteries. Variable displacement axial piston pump (Kawasaki) - 220L/Min / 320B. Load-Sensing control - 270L hydraulic tank capacity. Safety valves for boom and arm cylinders. 4WD hydrostatic travel - 2 speeds (0 to 4 km/h and 0 to 14 km/h). Axles with epicyclic reduction gears - oscillating front axle with lock. 10.00/20 double wheels with spacers. Cgjliq Apsv Untiorjt Front blade - 2 rear stabilizers - 2.50 m wide. Rotation by hydraulic motor and reduction gear. Swing ring with internal teeth, 1 to 7 rpm. Hydraulically raised cab - Steering wheel. Heating and air conditioning - Protective grille - Work lighting. Adjustable seat with suspension - Radio - Dashboard on left console. Controls by single-lever joysticks integrated into the seat. Travel controls by pedals. Electric controls for auxiliary hydraulic functions. Centralized 12-point automatic lubrication system (arm and turret).

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, type of input current: AC, overall weight: 3,972 kg, input voltage: 20,000 V, frequency: 50 Hz, Equipment: type plate available, Oil transformer according to Ecodesign Directive (Tier 2). The transformer has not been in operation so far. 12 month warranty Cgolijv Awufeq Aprjt

Year of construction: 2017, operating hours: 400 h, Condition: excellent (used), Functionality: fully functional, A high-end Austrian complete / turn key Brewery, newly purchased in 2017 directly from the owner. It has only been used approx. 100 times in 5 years. Maintained very well. It can do 2 brews simultaneously, so effectively a 10HL machine. Complete with 4 Uni-tanks of 12 HL and all necessary equipment, as well as all necessary hoses plus a mobile pump for CIP of the Unitanks, etc. Delivery possible per direct, located in the Amsterdam area. Cgjlev R Evaeiq Aprjt

Year of construction: 2011, Condition: as good as new (ex-display), I sell the automatic CNC working centre for BLOCK-HOUSE production Stromab Autoblox. Year 2011. New machine. Incutting saw 600mm / 7,5kW Cgelegiwkusiq Aprjt Dowel drilling unit up to dia.35mm x depth up to 320mm Tenoning head up to dia.230mm / 4kW Horizontal milling up to dia.230mm / 4kW Vertical milling up to dia.180mm / 4kW Automatic feeding system +-1mm Suitable for wooden house constructions! Available immediately.

Condition: new, Functionality: fully functional, Year of construction: 2025, Microsilica, also known as silica fume or condensed silica fume, is a byproduct of producing silicon metal or ferrosilicon alloys. Microsilica powder grinding mills are used to process microsilica powder for various applications, including the production of high-performance concrete, refractory materials, and other specialty products. Grinding mills play a crucial role in reducing microsilica particles to the desired fineness. Here are some key aspects related to microsilica powder grinding mills: Cgjlisq Nxp Seq Apret 1. Mill Types: - Ball Mill: A traditional ball mill is commonly used for grinding microsilica. It relies on the impact and attrition forces to reduce particle size. It is effective for both wet and dry grinding. - Vertical Roller Mill (VRM): VRM technology is known for its energy efficiency and the ability to grind materials into a narrow particle size distribution. It is suitable for grinding microsilica. 2. Grinding Process: - The grinding process involves feeding microsilica particles into the grinding mill. The grinding media (balls or rollers) inside the mill crush and grind the microsilica particles into a fine powder. 3. Particle Size Distribution: - Controlling the particle size distribution is crucial for achieving the desired properties in the final product. The grinding mill should be equipped with mechanisms to control and monitor particle size distribution. 4. Mill Design and Components: - The design of the grinding mill, including the type of grinding media, liners, and the grinding chamber, influences the efficiency and performance of the milling process for microsilica. 5. Air Classification (Optional): - In some cases, air classification systems are integrated into the grinding process to separate fine particles from coarser ones, ensuring a more uniform product. 6. Control Systems: - Advanced grinding mills often come with automated control systems to regulate various parameters such as feed rate, mill speed, and product fineness. 7. Material Handling: - Efficient material handling systems are essential to transport microsilica to and from the grinding mill. This may involve pneumatic or mechanical conveying systems. 8. Cooling Systems: - Grinding processes generate heat, and efficient cooling systems are often integrated to maintain the temperature within a controlled range. 9. Dust Collection: - Microsilica powder grinding can produce airborne dust. Dust collection systems are necessary to maintain a clean and safe working environment. 10. Quality Assurance: - Grinding mills for microsilica should be equipped with quality assurance features, such as in-line particle size analysis, to ensure consistency in the final product. When selecting a microsilica powder grinding mill, factors such as production capacity, energy efficiency, and the required particle size distribution should be considered. Additionally, mills should be chosen based on the specific characteristics of the microsilica being processed and the intended application of the final product.

Condition: used, Year of construction: 2024, Annaburger HTS 22C.17 SchubMax Plus Year of construction 2024, demo machine used Technical data: permissible total weight: 23,000 kg Box volume: 38 m³ Coliq Apet N Aacersgt Equipment: Tandem professional hydraulic chassis with 1st axle as hydraulic lift axle and 2nd axle as hydraulically lockable self-steering axle Bottom hitch with K80 MMS comfort control Quick-Cover" roller cover with hydraulic operation Chopper attachment 150 mm, mounted on one side Electric "tailgate closed" signal Load sensing without amplifier Short underride guard Lamp holder on the tailgate 650/55 R26.5 Alliance tires 40 km/h approval | Internal no.: 11192320

Condition: new, Year of construction: 2024, Annaburger HTS 29G.14 Tridem dump truck Year of construction 2024, demo machine used technical data: permissible total weight: 30,000 kg Box volume: 31.5 m³ Unladen weight: approx. 9,000 kg Equipment: Tridem parabolic chassis with 1st and 3rd axle as hydraulically lockable self-steering axle - middle axle rigid WABCO 2-ladder air brake system Hydraulically sprung drawbar MMS comfort control Bottom hitching via K80 ball head Roll-up tarpaulin with operator platform Internal chopper body, 490 mm 710/50 R26.5 Alliance tires 40 km/h approval | Internal no.: 11219208 Cgsliq Ajt Nz Uxjprot