Used Atlas Ar85 for sale (483)

Condition: used, Year of construction: 2018, operating hours: 4,730 h, Equipment: all wheel drive, Loading bucket approx. 1.8 m³, hydraulic quick-change system, pallet forks, good condition, vehicle may be wrapped and/or labeled for advertising purposes. Our offer is generally without new technical inspection (TÜV). If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. Djdpfx Asxb It Esdusla We are pleased to offer you financing or leasing options for this machine. Please contact us!

Year of construction: 2003, condition: ready for operation (used), 7.5 bar 18 kW weight 500 kg Dodpfoxu H Ubex Adujla

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2014, operating hours: 3,500 h, Atlas Copco XAS97 Compressor – 2750 rpm – 7 Bar – 36 kW – Weight 1060 kg – = Further Information = Year of manufacture: 2014 Intended use: Construction Contact Miguel Cubas for more information. = Company Information = Dodpfex Dy E Sex Aduela We are located between Antwerp and Brussels along the A12 motorway, near the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: BES041875, Thanks to its high impact frequency and reduced impact energy, it is primarily/ideally suited for use in track tamping or maintenance work. For driving rail spikes in wooden sleepers, driving pipes, posts, probes, and breaking concrete. Easy transport, short setup time, low emissions, low noise levels. HAPS (Hand and Arm Protection System). Dodpfx Aox Eb Udodusla

Condition: used, Year of construction: 2010, operating hours: 2,635 h, 2010 | Atlas Copco Boomer XE3C with COP 1838, very good condition, one defect (EPIROC) | Used Drill | 2635 hours 📍Location: Switzerland, Weite 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 98000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 49 inspection points 46 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Honest machine from two-tier system, three drilling arms, an additional tamping platform - no maintenance backlog, drive axle "with one blow" broken, no decomposition of the tooth flanks, rather shaft fracture suspected, no external bursting of the differential housing or the axle journals, casting in order. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39154 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Dljdpfxoxzhf Is Aduea We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2023, machine/vehicle number: ESF371201, fuel type: diesel, power: 34 kW (46.23 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.065 kg Dedpfx Adotr Nknjusla Generator capacity: 45 kVA Transport dimensions (LxWxH): 2.15x0.99x1.47 Please contact PFEIFER GROUP for more information

Condition: like new (used), Year of construction: 2017, operating hours: 64,630 h, functionality: fully functional, Used adsorption dryer CD150+. 9 m³/min. Djdpfoxyy Nvox Adujla

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L Dedsxl Hxbspfx Adusla

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2014, operating hours: 3,500 h, Atlas Copco XAS97 Compressor – 2750 rpm – 7 Bar – 36 kW – Weight 1060 kg – Dledpfsx Dy Efjx Aduoa = Further Information = Year of manufacture: 2014 Intended use: Construction Contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Year of construction: 2015, condition: used, Serial number: TMG15URExxxx Please contact ATS Norway for more information Please provide reference number upon request: 21725 Specifications: 2015 model Engine hours: Approx. 5,850 Weight: 38,000 kg Dafo fire suppression system 2 booms Dlodpoxu A Htofx Adusa Laser Both drill hammers and spare hammer overhauled in 2024 LED lights Radio/CD Climate control/AC Service performed as needed Rear camera not functioning Ready for delivery Boom 1: Impact hours: Approx. 575 Electric motor hours: Approx. 11,100 Total drilled length: Approx. 603,000 meters Compressor hours: Approx. 2,900 Boom 2: Impact hours: Approx. 510 Electric motor hours: Approx. 7,200 Total drilled length: Approx. 387,000 meters Compressor hours: Approx. 2,900 Own weight: 38000 Model: 2015 Atlas Copco Boomer MC2 Tunnelborerigg.

Condition: like new (used), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Instrument XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spraying System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. This device is designed to simulate sunlight, weather, and climatic influences and is used worldwide in research, quality control, and material testing. Features: - Professional equipment for UV and weather resistance tests - Ideal for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Features: - Weathering and lightfastness testing unit with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spraying system (ultrasonic humidifier, spray rods) - Measuring system with XENOSENSIV sensor for irradiance and black standard temperature measurement - Integrated touchscreen display for control and programming - Pre-installed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely programmable test procedures - Documentation capability via integrated printer (paper rolls) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors excepted!) Dlodpfx Adsw Thykeuea For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,950 h, functionality: fully functional, overall weight: 916 kg, total length: 1,200 mm, total width: 1,100 mm, total height: 2,000 mm, motor manufacturer: Atlas Copco, power: 55 kW (74.78 HP), fuel type: electric, volume flow: 650 m³/h, operating pressure: 13 bar, Equipment: documentation/manual, type plate available, Atlas Copco Screw Compressor Dodox Dfmzopfx Adusla Model: FA55VSD+ Year of manufacture: 2020 Operating hours: 8,950 h Motor rated power: 55 kW Pressure: 4.0 to 13.0 bar Volume flow: 182.5 l/s or 10.9 m³/min Voltage/Frequency: 400 V / 50 Hz Dimensions (L/W/H): approx. 1,200 / 1,100 / 2,000 mm Weight: 900 kg The compressor is in excellent working condition and has been regularly inspected and maintained. It is currently still powered and can be viewed in operation. An associated air dryer and compressed air tank can be purchased optionally (see further listings).

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Dsdpfx Aowrm T Ijduola

Condition: good (used), Year of construction: 2020, operating hours: 18,526 h, functionality: fully functional, machine/vehicle number: API842024, overall weight: 500 kg, total length: 1,280 mm, total width: 900 mm, total height: 1,600 mm, power: 26 kW (35.35 HP), rotational speed (max.): 6,500 rpm, ATLAS COPCO GA 26 VSD+FF compressor - Max. pressure: 2.75 bar - Volumetric flow: 5.1 m³/min - Voltage: 400 V - Frequency: 50 Hz Note: The item must be collected definitively between 19 and 23 January 2026 on a date to be agreed. FCA D-76571 Gaggenau – loaded onto truck Dodpsxw Ugqefx Adujla

Condition: used, mileage: 1,001 km, gearing type: other, overall weight: 520 kg, empty load weight: 320 kg, maximum load weight: 200 kg, first registration: 01/2013, color: red, driver cabin: other, Year of construction: 2013, Equipment: crane, Vehicle location: Bovenden, emergency stop. Superstructure: work basket for ATLAS 88.3-A3. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to change, prior sale, and errors reserved! Dlsdjx Avknjpfx Aduea

Year of construction: 2016, operating hours: 68,000 h, condition: used, Serial number: CAI72xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20523 Specifications: Model year: 2016 Hours: Approx . 68,000 Voltage: 400V Maximum pressure: 8.25 bar Weight: 360 kg Condition: Ready for delivery Description: The compressor is from 2016 and has run for approximately 68,000 hours . Dlsdpjxu A Eijfx Aduea Ready for immediate delivery. Hours: 68000 Total Weight: 360

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Dodpfxeuuarye Adusla Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 6,683 h, functionality: fully functional, overall weight: 916 kg, total length: 1,200 mm, total width: 1,100 mm, total height: 2,000 mm, motor manufacturer: Atlas Copco, power: 55 kW (74.78 HP), fuel type: electric, volume flow: 650 m³/h, operating pressure: 13 bar, Equipment: documentation/manual, type plate available, Atlas Copco Screw Compressor Model: FA55VSD+ Year of manufacture: 2020 Operating hours: 6,683 h Motor rated power: 55 kW Pressure: 4.0 to 13.0 bar Volume flow: 182.5 l/s or 10.9 m³/min Voltage/Frequency: 400 V / 50 Hz Dimensions (L/W/H): approx. 1,200 / 1,100 / 2,000 mm Weight: 900 kg The compressor is in perfect working condition and has been regularly inspected and serviced. It is currently still energized and can be viewed in operation. An associated air dryer and compressed air tank are available as optional extras (see other listings). Dljdpfox Dfmuex Adusa

Year of construction: 1994, operating hours: 34,200 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20522 Specifications: Year of production: 1994 Hours : Approximately 34,200 Voltage: 400V Condition: Works as it should Delivery status: Ready for delivery Dljdjxu A Ecspfx Aduja Description: The compressor was produced in 1994 and has run approximately 34,200 hours . It works as it should and is ready for immediate delivery. Hours: 34200

Condition: like new (used), Here we offer you a weathering tester. The Xenotest Beta+ is a high quality xenon device with a rotating sample carousel and an exposure area of 4000 cm². It has a complete set of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger test volumes or sample sizes. - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touch screen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300-400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Display of diagnostic messages - Memory for 10 user-defined test methods - Preprogrammed international standard test methods - Multilingual user interface Dljdpfx Ajihfrredusa - Non-aging XENOCHROME filters to simulate daylight outdoors, Daylight behind windows - On-rack XENOSENSIVE 300-400 nm for measurement and control of irradiance (in W/m2) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or via Dual control: chamber air temperature and Schwarz standard temperature (up to 130 °C) - Fan-controlled temperature difference between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60 liter water reservoir - Outer cylinder made of special UV glass - Shutdown after irradiation amount, exposure time or total operating time - Advanced auto-start functions - Data output via memory card or RS 232 interface - Ethernet interface for connection to internal computer network and use of of XenoTouch Add-Ons 1, 2 and 3 (remote control, e-mail service, online monitoring) Dimensions Width x depth x height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/ Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hrs. Light duration device 647.4 hrs. Total lamp operation 88.9 hrs. Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. The 3000 series is CE, UL, CSA, ISO and EN certified. Key features of this device include: a rotating sample basket to maximize the homogeneity of all samples; Dodpfxetq Em Ej Adusla customized nozzles for uniform sample front and back spraying; ASTM black plate thermometer or ISO/DIN black standard thermometer for control and monitoring, temperature at sample level to ensure test repeatability. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - display of all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Features: Climate type Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a be weathering tester. Atlas Xenotest Alpha LM a universal weathering instrument for testing the fastness to light and weather resistance of materials under normal, high-temperature and high-performance conditions. XENOCHROME filter XENOSENSIV gear Control the lamp power in W / m ² Sample room temperature controlled up to 70 degrees Electronics at sample level XENOSENSIV E(300-400 nm) and SST Stationary samples temperature and relative humidity sensor Humidification Irrigation Water supply with an integrated water tank Electronic version: 230V, 50/60 Hz Absorption filter 7 IR: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Djdpfjd Dtn Usx Adujla Window glass 10 FG: tracking 40-110 W / M ² turn running 21 - 57 W / m ² Absorption filter 4 IR + 3 window glass: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Absorption filter 6 IR + 1 UV: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Rel. electrical power without XENOSENSIV sensor: continuously adjusted to the set value 53-120% Samples ambient temperature:-20-70 ° (depending on selected filters configuration) Black standard temperature: Tracking 25-130 ° C turning barrel 25-100 ° C Relative humidity: 10% - 95% Fan RPM: 500-2500 RPM Dimensions: 900 x 780 x 1800 mm Type: Xenotest Alpha LM high energy Condition: pre-owned / used Scope of delivery: (See image) The unit comes out of an operation. We may more questions like on the phone for you answered

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer Dedpfx Adjucd Rbouola The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Features: Type Climate Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Pressure 80-100 PSI (552-689 kPa) Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: Dodpfoxbd Raex Adujla 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Dljdeg Dglyepfx Adusa Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.