Used Isal Pb120 D for sale (8,614)

Condition: reconditioned (used), Year of construction: 2005, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC universal milling and drilling machine DECKEL MAHO DMU 80 P duoBlock With contouring control Heidenhain iTNC 530 Year of manufacture: 2005 Travel paths: X 800 Y 800 Z 800 Speed range: 0 – 18,000 rpm continuously variable (SK 40) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine spaces as double gripper (SK 40) Fully protected cabin with sliding doors and interior lighting IKZ – 40 bar Chip conveyor Rotoclear Tool measurement in the work area (BLUM Laser) Duobsvyp Tzo Etq Hrot 3 D measuring probe Heidenhain TS 641 Electronic handwheel Operating mode 3 + 4 Chip flushing gun 3-piece height-adjustable machine shoes Operating instructions

Condition: ready for operation (used), Year of construction: 2001, x-travel 630 mm y-travel 500 mm z-travel 500 mm control Sinumerik 810 D Shop Mill Number of working hours 5180 h table surface area 800 x 500 mm 500 kg table load 30 m/min feeds x/y/z -stepless 1 - 30000 mm/min max. torque on the spindle 1-10000 U/min Dujb Eswg Hpxotq Hrot power capacity - milling spindle 9/13 kW tool taper 24 Stück SK 40 | | dimensions 5,0 t dimensions 3,1 x 2,1 x 2,4 m Well-maintained vertical machining center, DMG, model DMC 63V, with Sinumerik 810 D Shop Mill and controlled 4th-axis Lehmann rotary table, model EA 410, 150 mm pitch. The machine has been used only for special jobs, hence the limited operatinghours. It is now only used sporadically as a backup machine. It will be replaced by a new machine in August. 3 Vids on our website! Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2007, Manufacturer: GEMINIS Model: GHT5 G2 1000 x 3000 Cnc : SIEMENS 810 D Year : 2007 Distance between points : 3000 mm Max. Swing over bed : 1000 mm Max. Swing over saddle : 680 mm Main shaft hole diameter : 104 mm Turning speed : 1400 rpm Main motor : 37,5 kw Cross slide travel : 8m/min Tailstock quill diameter : 140 mm Quill traverse : 300 mm Dsbswgmz Ue Etq Hrjut Bed width : 550 mm

Condition: used, Year of construction: 2005, x-travel 700 mm y-travel 630 mm z-travel 700 mm Control SIN 840 D SIEMENS spindle turning speed - stepless 10.000 U/min power capacity at 100 % load 13,00 kW feeding force at 40 % ED 18,00 KW tool taper HSK-A63 spindle diameter in front bearing 80 mm feed X/Y/Z/-axis 1 - 50.000 mm/min rapid traverse X/Y/Z 50,00 m/min feed capacity X/Y/Z 5,00 kN B - axis 360 x 1 ° B-axis 30,00 U/min size of pallet 2x 500 x 500 mm workpiece weight 500 kg 0 700 x 700 x 750 mm tool magacine with 40 Plätzen tool length - max. 350 mm tool diameter 80 mm tool diameter with 2 vacant positions 150 mm weight of tools max. 10,00 kg Chip to chip time 4,00 sec. total power requirement 24,00 kW weight of the machine ca. 15,00 t dimensions of the machine ca. 4,00 x 4,00 x H3,00 m Horizontal machining center with SIEMENS SIN840D (PCU50); chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min; Dusb Eewhqtqjtq Hrot

Condition: good (used), Year of construction: 1992, Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Manufacturer: Reinecker Type: WZS-50 CNC Control Unit: Siemens Sinumerik 880G Year of Construction: 10/1992 Including extinguishing system Including various accessories Travel axes: X – Y – Z – C – E Interface Type: E32R Weight: 3000 kg Space required approx. (L x D x H): 3 m x 3 m x 3 m Dob Etq Hjwhqu Uoreut Complete documentation is available. Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex-stock, plus VAT. Condition: good - ready for demonstration Delivery: ex-stock - as seen Payment: net - upon receipt of invoice Subject to prior sale, errors excepted. We welcome your order. Additional machines and systems are available from stock – please inquire. We look forward to hearing from you.

Condition: excellent (used), Machine type: CNC turning center Model: CLX550V4 Manufacturer: DMGMORI Control: SLIMline® Multi-Touch Contr./Fanuc Year of manufacture: 2019 Location: Germany Turning diameter max. approx. 425mm Standard turning diameter approx. 315mm Chuck size approx. 300mm Turning length approx. 1240mm Bar diameter max. approx. 100mm Turret stations 12 X-axis approx. 307mm Z-axis approx. 1,240mm Y-axis approx. 120 (+-60)mm Tailstock approx. 1,200 mm Spindle speed max. approx. 3,250 rpm AGW speed max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 22.5 m/min Main spindle 22/33kW • 3-jaw chuck D 315mm • Robot interface • 12 station turret VDI 40 • Tool drive for all stations • C-axis • Y-axis • Chip conveyor • Coolant pump 8/20 bar • 4-way indicator light • Automation package • Automatic sliding hood, electric • Connection piece for oil mist separator • Electric handwheel • Y-axis • Preparation for steady rest Dujbowg Twvs Etq Hret (Errors in the technical data and information reserved)

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Condition: As good as new Equipment and technical data: Mobile clean air dust extractor The most powerful among the mobile dust extractors Mobile dust extractors of the Vacomat series are suitable for extracting dust and chip material. Dust extractors are often used as single or multi-machine extraction systems in small and medium-sized companies with air volumes of up to 8,000 m³/h. Our mobile dust extractors are tested according to the regulations of the Wood Trade Association. With the H3 (residual dust content < 0.1 mg/m³) and GS (tested safety) test marks, Vacomats can also be installed indoors in the workshop. To ensure healthy return air, we only use our high-quality filter material of dust class "M". Our dust extractors achieve low electricity costs for environmentally friendly extraction operation thanks to energy-saving, high-efficiency motors "made in Germany." Cleaning methods for our mobile dust extractors • Pneumatic-mechanical cleaning (designated XP) using a patented vibration system by "knocking out"; compressed air connection required; starts manually as needed when the processing machine is switched off • Electro-mechanical cleaning (designated XPe) using an efficient vibration motor; no compressed air connection required; starts automatically after the processing machine is switched off • Compressed air cleaning (optional) for continuous operation, no extraction breaks necessary, especially recommended for the finest and special dusts from CFRP, GRP, gypsum, etc. Vacomat 250 XP, 300 XP, and 350 XP dust extractors are supplied with an automatic control cabinet: automatic fan start-up, automatic filter regeneration The highlights at a glance: ? Performance sizes from the small entry-level model to the powerful one Extraction center ? Application-specific component selection for cleaning and disposal options ? Environmentally friendly and energy-saving operation, also through heat recovery (recirculation principle) Deb Etqjwhukts Hrout ? Energy-saving control features (PLC control) including volume flow monitoring ? User-friendly control of the dust extractor is also possible via the processing machine ? Quiet operation thanks to soundproof housing ? Maximum workplace safety thanks to BG certification (according to GS HO 07) and pressure-resistant construction (according to DIN 8416) ? From Vacomat 250 XP, including automatic fire extinguishing system (powder extinguisher) ? The tested filter materials guarantee healthy return air ? Largest possible filter area thanks to SchukoCone® filter bags - especially recommended for the finest dusts ? Delivered plug-in for quick and easy on-site installation Technical specifications 300 XP: Suction nozzle Ø 300 mm Motor power max. 7.5 kW Flow rate 5,950 m³/h Nominal flow rate (at 20 m/s) 5,087 Valve pressure 2,760 Pa Filter area 32 m² Certification mark: H3 (residual dust content < 0.1 mg/cbm), BGHM HO 143032 Filter regeneration: pneumatic Sound pressure level: 74 dB(A) Incl. Schuko V22/23 series control cabinet Incl. forklift brackets Weight including packaging: 990 kg Transport dimensions: 3.70 m * 1.60 m * 2.30 m Installation dimensions: 3.65 m * 1.54 m *

Condition: used, Year of construction: 2006, pressure 175 t chamfer lenght 3550 mm distance between columns 3050 mm throat 405 mm stroke 400 mm ram stroke speed 140 mm/sec working feed 10 mm/sec return speed 180 mm/sec work height max. 900 mm oil volume 350 l Control CYBELEC ModEva 10S total power requirement 25,5 kW weight of the machine ca. 13800 kg dimensions 5980 x 3590 x 3220 mm Dsbewgn Dqe Etq Hreut Furnishing: - DELEM CNC control DA65 - controlled axes: Y1 + Y2 + X + R - Electric crowning device WILA, controlled via CNC - Electric back stop, travel range 600 mm - hydr. Upper tool holder WILA - hydr. WILA lower tool holder - front laser protection device FIESSLER - 5x manually adjustable stop fingers, foldable - 2x front support arms “sliding system” - side + back protection device - Hand and foot controls - Operation manual ?

Condition: good (used), Year of construction: 2014, operating hours: 54,816 h, Functionality: fully functional, Year of manufacture 2014 3D control Heidenhain TNC 530 Tool holder HSK-A-63 Chain magazine with 60 tool positions NC swivel rotary table / C-axis table top d 650 Travel paths 750 mm x 650 mm x 560 mm Production package / 600 liters / internal cooling 40 bar / 23 l/min Rotating viewing window Flushing gun with pump Oil and emulsion separation system Infrared measuring probe / Heidenhain TS 649 Tool measurement in the work area (Blum Laser) Oil and emulsion separation system Djb Etqswhltxs Hrjut Infrared measuring probe / Heidenhain TS 649 3D quickSET expansion package Four-color signal light Operating mode 4 Motor spindle speedMASTER 18,000 rpm Spindle hours 24,449 Tool measurement in the Work area (Blum Laser)

Condition: used, Year of construction: 2010, grinding length 1025 mm grinding width 520 mm Control SINUMERIK 840 D tool taper HSK-A 63 A - axis ° workpiece weight 30 kg Dujb Etq Hjvxwl Aerst distance grinding spindle - table min./max. 473,5 - 1023,5 mm x-axis 520 mm y-axis 550 mm z-axis 1000 mm V-axis 166 mm feed x-axis 4 - 6.000 mm/min feed y- axis 4 - 4.000 mm/min Feed z- axis 30 - 25.000 mm / min. table dimensions 1.400 x 874 mm spindle speeds (infinitely variable) 0 - 12.000 U/min power capacity - grinding motor 35,00 kW grinding wheel diam. min/max. 100 / 300 grinding wheel width 60 mm total power requirement 100,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared. Without Host-Computer for workpiece- tool- management. without coolant device - was connected to the central supply.

Condition: repair required (used), Year of construction: 2015, Functionality: limited functionality, Universal horizontal milling machine CNC Quaser HX 404 Manufacturer: Quaser Type: HX 404 Control unit: Fanuc Series Oi-MD Incl. handwheel Year of construction: 08/2015 Machine is being offered as in need of repair and is being sold Weight: 10,500 kg Space required approx. (L x D x H): 492cm x 237cm x 290cm Complete documentation is available. Various accessories included: -Tools -Tool tower -Chip conveyor -Cooling unit Duebevn Enkj Etq Hrot Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex warehouse here plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as seen Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Dsb Etq Howhkdcsreut Swing over slide 700 mm Spindle bore 128 mm Spindle speeds 6.4-1'600 rpm SIEMENS 810 D control Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Dobswhukgj Etq Hrout Condition: like new Equipment and technical specifications: Holz-Her DYNESTIC 7535 10.5 Lift machining center Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, unit head, and consoles Gantry-style traveling column Rack and pinion drive, helical gears, in the X and Y directions 1 ball screw in the Z direction for precise positioning MATRIX table Fixed, continuous machining table with grid divisions, continuous slots in the X and Y directions, 50 mm slot spacing with 25 meters of sealing cord for clamping the wear plate 1 machining area with stop bars / stop Height 30 mm, pneumatically lowerable. Two stop bars each in the Y direction and one stop in the X direction on the right (viewed from the front edge of the machine). Remote maintenance: Integrated network card for transferring control and program data. Data is transferred via a high-speed internet connection. Requirement: High-speed internet connection on the machine. USB port for data backup or for directly loading machining programs on the control panel. TECHNICAL DATA: Machining dimensions 7535 10.5: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances: X = 4695 mm Y = 2305 mm Z = 565 mm Max. machining height 7535/7735 Classic without pusher Z = 300 mm from table top edge (without wear plate) Max. overtravel height of the pusher over the table of the Push/Auto/Lift versions: Z = 250 mm from table top edge (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION: SOFTWARE CAMPUS V7 Plus CAD/CAM Software 1 license including material removal simulation 1 pc. Software license secured via license plug for the machine CAMPUS V7 PLUS, software for CNC machining centers Consists of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS = 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology CONTROL Incl. ECO MODE - time-controlled shutdown of drive and control components to save energy Windows-based industrial PC controller Intel Core i5-6600 8 GB RAM 256 GB M.2 (NVMe SSD) 24V DC industrial standard Electronic stop monitoring for all selected stop bars or stop bolts on the machine. Safety device to prevent damage to the stops. Handheld control unit for remote control of the machine (13 m) with the following operating functions: > Start/stop of the machining program > Speed control of the machining cycles > Reset button > Manual feed/rapid traverse for all axes > Emergency stop Control panel with 21.5" 16:9 touchscreen Capacitive multi-touch screen for intuitive operation - Continuous glass surface - Includes wireless

Condition: used, mileage: 341,999 km, power: 397 kW (539.77 HP), first registration: 02/2022, overall weight: 9,730 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2022, ID: 2923-375483 All our vehicles and the latest offers - Features I-See Predictive Cruise Control. Map based topography information. FH Globetrotter XL sleeper cab. 2 x 210 Ah - AGM Absorbent Glass-fibre Material type. Starter battery box on LH side when dual batt system. D13K540 diesel engine, 540hp, 2600Nm SCR and EGR. I-Shift Automated 12-speed - GCW 60 tons. I-Shift manual gear shift available in automatic mode incl kickdown function. Gearbox mounted retarder. Gearbox oil cooler - Basic water to oil. Driver comfort Fully electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Electrical window lift, auto up/down driver side, el operated on passenger side. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - air to air. 33 liter under bunk mounted refrigerator with freezer and deviders. Technical specifications Continental VDO 4.0 smart tachograph. Front tires 315/70 R22.5. Rear tires 315/70 R22.5. Jost JSK 37 cast iron fixed fifth wheel. Wheelbase 3200 mm. Left 700 liter aluminum 710 mm high D-shaped diesel tank with two steps. AdBlue tank 65l behind/under cab on right hand side. Right 365 liter aluminum 710 mm high D-shaped diesel tank. Road speed limiter setting 90 km/h. Technology Vehicle assistance service enabled, with voice channel. Fleet Management System gateway, preparation kit. Assistance switch and microphone, Volvo Action Service (VAS). Exterior LED headlamps. Head lamp asymmetry right, for LHD roads. V-shaped daytime running lights. Front fog lights - white. Dob Etev E Dc Ieq Hreut

Condition: used, Year of construction: 2010, grinding length 1025 mm grinding width 520 mm Control SINUMERIK 840 D tool taper HSK-A 63 A - axis ° workpiece weight 30 kg distance grinding spindle - table min./max. 473,5 - 1023,5 mm x-axis 520 mm y-axis 550 mm z-axis 1000 mm V-axis 166 mm feed x-axis 4 - 6.000 mm/min feed y- axis 4 - 4.000 mm/min Feed z- axis 30 - 25.000 mm / min. table dimensions 1.400 x 874 mm spindle speeds (infinitely variable) 0 - 12.000 U/min power capacity - grinding motor 35,00 kW grinding wheel diam. min/max. 100 / 300 grinding wheel width 60 mm total power requirement 100,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without Djb Etqevxwinj Hrsut a tool changer), fire extinguishing device, Renishaw probe prepared. Without Host-Computer for workpiece- tool-management. without coolant device - was connected to the central supply.

Condition: good (used), Year of construction: 2002, Universal CNC lathe BOEHRINGER NG 200 Manufacturer: BOEHRINGER Type: NG200 CNC double Control unit: Siemens 840D Year of construction: 10/2001 Turning diameter: 290 mm Turning length: 850 mm Control: SIEMENS 840 D Turning diameter over bed: 600 mm Turret 1 Turret 2 Counter spindle Dsb Ejvr Eqgotq Hrsut Counter spindle stock Tailstock C-axis Driven tools Automatic machine doors - newly retrofitted Z-axis resolution: 40nm (2nm interpolated) Travel path in Z: 740mm Rapid traverse speed in Z: 25 m/min Centering tip SK 30 X-axis resolution: 125nm (8nm interpolated) Travel path in Z: 220mm Rapid traverse speed in Z: 25 m/min Distance between main and counter spindle: 1034mm Drive power: 30-72 kW Torque: 662 Nm Max. speed range: 4500 rpm Spindle head: size 6/8 DIN 55026 Spindle diameter in front bearing: 120 mm Chuck diameter: 200-315mm Spindle bore: 103 mm Tailstock quill holder MK: MK 4 Machine weight approx. [weight]: 11 t Space required approx. [needed space]: 6.0x2.3x2.5 m Complete documentation is available. Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex warehouse here plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as seen Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Year of construction: 2022, Condition: used, Used machine Year of manufacture 2022 Condition: like new, still in original packaging Image shows an example of the system Features and technical specifications: JumboErgo vacuum tube lifter With the JumboErgo vacuum tube lifter, both light and heavy loads can be moved quickly and precisely. Load capacity: 140 kg Consisting of: 1 x direct-drive vacuum blower for tube lifter applications Type: SBL-260-520-IE3-TYP1 Size: L Suction capacity (50 Hz): 260 m³/hm Vacuum (50 Hz): -520 mbar Rated power (50 Hz): 4 kW Version: IE3: EU/CN/IND Sound pressure level (50 Hz): 74 dB Voltage (50 Hz): D230V/Y400V ±10% Voltage (60 Hz): D265V/Y460V ±10% Approval: UR or UL or CSA Protection class: IP 55 - Powerful blower with optimal characteristics for tube lifter applications - Accessories: Vacuum safety valve and exhaust silencer - The device is mounted using a base for floor, wall, or column mounting. (Mounting hardware not included) - Safe handling even with porous workpieces - Electrical design according to VDE, UL, and CSA The installation of a dust filter in the suction line is strongly recommended to protect the vacuum generator from any type of contamination. The noise level of the entire system may vary from the vacuum generator's values depending on the suction cup. Note: Recommendation for on-site circuit breakers: D 230V [50Hz] / D 265V [60Hz] / Y 400V [50Hz]: Type D16 1 lifting unit for Jumbo hose lifter Type: HE-140-1700-230 Load capacity (horizontal): 140 kg Outer diameter: 230 mm Height H: 2920 mm Lifting unit stroke: 1840 mm Color: RAL 7035 Light Gray - Flat, ball-bearing swivel inlet for continuous rotation of the control unit - Suspension eye on the swivel inlet for easy attachment to a crane chassis - Suspension eye diameter: 23 mm - Flexible, robust, and durable multi-layer lifting hose - Safety check valve for slow lowering of the load during Power outage * Since the lifting hose is produced manually, a tolerance of +/- 50 mm in the lifting height must be taken into account. 1 x Control Unit for Jumbo Hose Lifter Type: BE-140-750-E-STAR Control Element: Ergo Load Capacity: 140 kg Operating Handle Length: 750 mm Design: Rigid Color: RAL 7035 Light Gray - Rotary handle for ergonomic control of the up and down movement and the lifting speed with and without load - Adjustable floating position without load Due to the length of the operating handle, the use of a spring balancer is mandatory. 1 x Hose for Vacuum and Compressed Air Systems Type: VSL 58-50 15 PVC-PS Outer Diameter D: 58 mm Inner/Bore Diameter d: 50 mm Length L: 15 m Material: PVC, with PVC spiral Installation Radius (min): 170 mm Color: Gray Pressure Range (Operating Pressure): -0.50 ... 0.50 bar Ambient temperature: -40 ... 60 °C 1 dust filter Type: STF 50 P 4.5 SSD Connection: Ø50mm Design: Piclon housing Dsb Etswhukmoq Hrjut Nominal flow rate: 270 m³/h Filter fineness: 3 μm Additional equipment: SSD hose clamps - Plastic housing with replaceable filter cartridge, including bracket for wall mounting and 2 hose clamps - Total weight

Condition: repair required (used), Functionality: fully functional, Universal turning center Doosan Puma TT1800SY-GL Dsb Etq Hju Sqh Ujrjut Manufacturer [manufacturer]: Doosan Infrcore Type [ type]: Puma TT1800SY-GL Steuerung [control unit]: Fanuc Series 31i-Model A Incl. handwheel Year of construction: 08/2012 Incl. handling - line gantry - robotics Driven tools Spindle turret Guide in the X-axis is in need of repair, defective! Must/should be repaired - replaced Operating hours: approx. 29,500h Travel range [travel path]: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle: swiveling +-90˚ Feed speed: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force: 10,000-15000N Tool holder: SK 50 according to DIN2080 Weight: 11,500kg Space required [needed space ]approx. (W x D x H): 4.1m x 5.1m x 2.5m Complete documentation is available. Inspection under power can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Suitable for thick solid wood and laminated panels Trimming length: 2250 mm Max. saw blade diameter: 315 mm With mounted scoring unit Max. cutting height at 90° / 45°: 100 / 80 mm Cutting width at the parallel stop: 900 - 1270 mm Motor: 4 kW Stable support thanks to a 270 mm wide sliding carriage and trimming frame Dsbswhulko Etq Hrout Availability: Short term Location: Röllbach

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Mägerle rack grinding machine Grinding machine MFP-L Siemens CNC - Rack milling grinding machine see Studer Kellenberger Manufacturer: Mägerle Type [ type]: MFP-L-260-75 Steuerung [control unit]: Siemens 840D Sinumerik Incl. handwheel Year of construction: 10/2008 Travel path: Dsbeu Rqrwe Etq Hrjut Clamping surface table X= 2202mm Clamping surface table Z=352mm Longitudinal stroke 2600mm Cross stroke of the grinding support [cross stroke oft he grinding support] : 650mm Distance between table and grinding spindle axis 806mm Grinding wheel dimensions: Diameter 400mm Width 160mm Bore 127mm Peripheral speed grinding wheel: 35(50) m/s Lifting speed: Longitudinal 30m/min Transverse 5m/min Vertical 5m/min Minimum infeed 0.001mm Drive power: Grinding wheel (AC) 75kW Total connected load [total connection power]: Machine 113kVA Knoll coolant filtering equipment dimensions approx: (L x D x H): 5.6m x 2.4m x 3m [weight]: 2.000kg Machine weight: 21,000kg Space required [needed space ]approx. (L x D x H): 7.06m x 3.7m x 3.26m Complete documentation is available.

Year of construction: 2022, Condition: used, Screw compressor with receiver and refrigeration dryer Used Year of manufacture 2022 Deb Etq Hewhuk Hsrsut Compact screw compressor with variable speed control and innovative LOGIN control Technical specifications: Maximum pressure: 10 bar Effective delivery rate: 1,050 l/min Motor power: 7.5 kW Noise level: 62 dB(A) Dimensions: 1,200 x 650 x 1,540 mm Connection: 1/2" Receiver capacity: 270 l (AD2000) Weight: 295 kg Features Frequency controlled? Electronic control system; Oil heat exchanger? Compressed air receiver; Hot-dip galvanized inside and out; Drive transmission: Direct coupling; Star-delta connection; AD 2000 compliant; Yes; Availability: Approx. May 2025 Storage location: Bavaria

Condition: excellent (used), Year of construction: 2004, ABA sanding machine Starline CNC profile sanding machine Surface sanding machine Manufacturer [manufacturer]: ABA ELB Dusb Etqovcm Eae Hret Type [ type]: Starline Control unit: Siemens Sinumerik Incl. handwheel Year of construction: 10/2004 Weight: 6000kg Space required [needed space ]approx. (W x D x H): 4.1m x 5.1m x 2.5m Complete documentation is available. Inspection under power can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: good (used), Year of construction: 2009, Functionality: fully functional, Precision profile grinding machine PPSM Habrama 2200 rack and pinion grinding machine Manufacturer [manufacturer]: Habrama Moving column machine - ideal for automatic loading Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Djb Etq Hou Rqg Ierout Year of construction: 10/2009 Grinding range: Module 0.1 to 22 cutting and special profiles, special pitches Travel path axes: X-axis (longitudinal): 2200(2500)mm Y-axis(transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W-axis: 125mm B2-axis: +20°/-20° Workbench: 390 x 3,750mm Max. Table load: 4000kg Feed speed X-axis: 21m/min Y-axis feed speed: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding wheel holder: 100mm H5 Cutting speed programmable: constant 10-80 m/s Grinding wheel: ceramic or resin-bonded Grinding wheel width max.: 101mm Grinding wheel ø: min. 210mm-max. 400mm Bore diameter of grinding wheel: 152.4mm (6 inch) Grinding range: up to module 22 special profiles freely programmable Hybrid clamping device / plates Coolant system: approx. 4000 liters with integrated deep-bed filter Machine total connected load: 100kVA Weight: 20,000 kg Space required [needed space ]approx. (L x D x H): 5,200mm x 3,000mm x 2,600mm Complete documentation is available. Inspection under power can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: excellent (used), Year of construction: 2000, Henschel gear shaping machine Dob Etq Hsvwmt Hersut Röber model Type 673/1 Year of manufacture 1961 / 2001, overhauled max. wheel diameter: 450 mm. stroke: 100 mm. max. module: 7. power: 5.5 kW. weight: 4000 kg. space required approx. (L x D x H): 1500x1300x2200mm complete documentation is available. various accessories inspection under power can be arranged at short notice. we are happy to answer any further questions you may have. price, ex warehouse, plus VAT. condition: good - ready for demonstration delivery: ex warehouse - as viewed payment: net - after receipt of invoice subject to prior sale, errors excepted. we ask for your order. Other machines and systems available from stock – please enquire. We look forward to hearing from you.

Condition: good (used), Year of construction: 2012, Functionality: fully functional, Universal washing system, round table cleaning system, Semmelroth, stainless steel parts cleaning Manufacturer: Semmelroth Dujb Etjvw A Dzeq Hrjt Type: S902 Round table cleaning system, rotating washing booth Completely made of stainless steel Control unit: Siemens Year of construction: 10/2012 Rated voltage: 400 VAC Max. power consumption: 19 kVA Weight: 1500kg Space required approx. (L x D x H): 2000 x 1800 x 2200mm Complete documentation is available. Inspection under power can be carried out at short notice. We are happy to answer any further questions you may have. Price, ex warehouse here plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Additional machines and systems are available from stock - please ask. We look forward to hearing from you.