Used Isal Pb120 D for sale (8,615)

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Duob Ejwhgd Sengqgot Pivotable up to 45° Saw blade diameter: 450 mm Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Weight: approx. 1000 kg Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: good (used), Item: D-10737-Auger Bulk Feeder Stainless Steel Bulk Feeder with weight Stainless Steel auger Ø6" (150 mm). Dujbshn S Efs Engqgot Dimension: Bulk L 980 mm X W 980 mm x H 700 mm Auger: Max H 2400 mm Discharge 1900 mm Opening at bulk top: 700 x 700 mm One side at wheels

Condition: used, Year of construction: 2004, max. wheel diameter 200 mm gear width 250 mm max. module 5 min. module 0,1 milling tool taper HSK 80 B spindle turning speed range 0 - 1000 U/min control 840 D total power requirement 15 kW weight of the machine ca. 10,2 t dimensions of the machine ca. 4.455 x 3.160 x 3.335 m Gleason-PFAIJTER CNC gear milling machine GP200 for gear cutting of shaft and wheel-shaped workpieces with all rollable profiles and shapes that regularly occur on the cylindrical workpiece circumference. Optionally for wet milling with cooling lubricants (basic version) and/or dry milling (option). Working area and technical data: Max. workpiece diameter that can be cut .. 200 mm Machine nominal module ..... approx. 5 mm (Guide value depending on the respective machining task and the specific machine equipment.) Smallest/largest distance between milling cutter and workpiece axis ... 15/215 mm The travel paths and angles mentioned above can be restricted if necessary depending on the workpiece and tool dimensions, the gear data and the workpiece-dependent machine equipment Accessories 1 compressed air maintenance unit (make FESTO) 1 signal light (3-color) to display machine statuses 1 work area light 1 control cabinet light 1 set of tools for machine operation and maintenance 2 operating instructions 2 programming instructions 2 maintenance instructions 1 set of electrical documents in German or English Dusb Engev Eha Deqget

Condition: used, Year of construction: 2004, Dear Sir or Madam, We are offering a used "BERG UND SCHMID" aluminum cold circular saw in good condition. Model: "Multi Cut 500HA PENTA" Digital miter angle display Infinitely adjustable saw feed Two pneumatic vertical vices Ball-bearing rotary table for miter and rip cuts Mist spray system Dueb Ejwhmy Hsngqgot Year of manufacture: 2004 Serial number: 091 Technical specifications: HM saw blade Ø 500 x 4.2/3.6 x 30 mm Cutting range [mm] 90° 45° left 45° right Round 160 140 140 Square 140 120 120 Rectangle 100x200 100x150 100x150 Speed: 2800 rpm Infinitely adjustable feed speed External dimensions W x D x H: 85 x 105 x 145 cm Weight: 350 kg Accessories: Discharge length stop with roller conveyor ST 260 roller width 260 mm, made of plastic, 4.0 m

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231259, Hermle C600 U, built in 2005, without Cellro magazine, with FANUC robot, without Lang loader (Cellro magazine with FANUC robot and Lang loader can be purchased optionally) Siemens 840 d control system Operating hours: 78,025 Spindle ON: 17,382 Drives ON: 37,955 Tool change: 586,110 NC software: 05.03.39 PLC software: 05.03.21 18,000 SK40 spindle Laser tool breakage monitoring Sensor Oil mist extraction Chip flushing gun X travel: 600 Y travel: 450 Z travel: 450 Rapid traverse in X/X/Z: 35 m/min Infinitely variable spindle speed Weight: approx. 6,700 kg Chip conveyor on the left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC - Coolant system standard - Chip conveyor - Enclosed cabin roof section - Electronic thermal compensation (iTNC) - Electronic manual control module (iTNC) - Tool breakage monitoring - Chip flushing gun - Foot switch for clamping/unclamping - 200 bar hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - X/Y/Z measuring system: 0.1 µm Optionally available: Cellro magazine, built in 2005, automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot • Type: Automated storage system (robot magazine) • Capacity: 300 tool holders (for storage and quick tool exchange) Optionally available: LANG Technik automation system with slide arrangement, built in 2005, storage capacity of approximately 50-60 clamping vises. Dimensions & weight of the machine tool: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information, as well as prior sale! Hermle C600 U, year 2005, without Cellro magazine, with FANUC robot, without long loader (Cellro magazine with FANUC robot and long loader can be purchased as an option) Siemens 840 d control system Operating hours: 78025 Spindle ON: 17382 Drives ON: 37955 Tool change: 586110 NC software: 05.03.39 PLC software: 05.03.21 18,000 Spindle SK40 Tool breakage monitoring Laser Probe Oil mist extraction Chip flushing gun X-path: 600 Y-path: 450 Z-path: 450 Rapid traverse in X/X/Z 35 m/min Stepless spindle speed Weight approx. 6700kg Chip conveyor left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC Duob Enswh Sbijgqgot - Standard coolant unit - Chip conveyor - Closed cabin roof section - Electronic thermal expansion compensation (iTNC) - Electronic manual control module (iTNC) - Breakage monitoring tool - Chip flushing gun - Foot switch for clamping/unclamping - Hydraulic unit 200 bar for clamping/unclamping Traverse paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z axis (vertical): 450 mm Table: - Clamping surface: 800mm x 465mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Optionally available: Cellro magazine built in 2005 automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot - Type: Automated st

Condition: excellent (used), mileage: 54,582 km, power: 308 kW (418.76 HP), first registration: 10/2013, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x2, empty load weight: 13,155 kg, loading space length: 9,150 mm, Equipment: tail-lift, Volvo FM410 EEV/Carrier/LBW/Air Conditioning/3 Cooling Chambers Deb Engqjwhmr Aogjut • Manufacturer: Volvo • Type: FM410 EEV • Mileage: 954,582 km • First registered: 10/2013 • Unladen weight: 13,155 kg • Payload: 12,845 kg • Gross vehicle weight: 26,000 kg • Power: 308 kW/418 HP • Transmission: Automatic • Wheel configuration: 6x2 • Suspension: Air/Air • Air Conditioning • Carrier 950U • -30°C cooling • Rear view camera • Roof hatch • Wüllhorst tail lift • Lift-steer axle • 3 Cooling Chambers • Euro: EEV1 • German vehicle • German papers • Ready for immediate use • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. - Sale subject to our terms and conditions.

Condition: new, Functionality: fully functional, Lenze SE Brake Resistor, 18 Ohm, 13187250, ERBS018R01K4 Model: 13187250 Type: ERBS018R01K4 Condition: New Technical Specifications: Dob Engjwid Rxeqgjut 800V DC 1400W ALW 90 General: with QEV111ACSJD6 Resistance 18 Ohm Climatic Conditions Class 3K3 EN 50178 non-condensing, average relative humidity 85% Permissible Ambient Operating Temperature -10°C ... +55°C over 1000m Reduce continuous power P d by 5%/1000m with installation instructions

Condition: excellent (used), Item: D-5465-Flowmeter-Endress+Hauser Promass F Duob Engqeh Nvx Segjt Transmitter with display. Second hand 2" Type 60SF50 Temp. max 200

Condition: like new (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 58 mm max. module 13 Djb Esvzhhmongqgsut min. module 2 control SINUMERIK 840 D min. number of teeth 5 max. number of teeth 2000 transmission ratio 1:10 b-axis -5 / +90 ° total power requirement 75 kW voltage 400 V voltage 230 V weight of the machine ca. 9,4 t dimensions of the machine ca. 4,7 x 3,6 x 2,82 m Gleason-Pfauter 275 HC - NC bevel gear milling machine - Year of manufacture: 2002 - Equipped for milling with oil - Integrated magnetic chip conveyor, without cutter head + holders Technical data 275 HC: (workpiece) - Maximum transmission ratio --> 1:10 - Minimum number of teeth --> 5 - Maximum number of teeth --> 2000 - Maximum tooth height / full tooth depth --> 20 mm - Maximum tooth width --> 58 mm - Maximum pitch circle diameter --> 275 mm (tool) - Smallest permissible milling head Ø --> 2.5 inch - Largest permissible milling head Ø --> 9 inch (machine) -> slide path 325 mm - Vertical workpiece slide (Y-axis) --> 350 mm - Milling slide (Z-axis) --> 475 mm -> Largest basic angle 90° - Direction -B --> -5° -> Workpiece table 212.71 mm (speeds) -> feeds 1 - 6,000 mm/min -> rapid traverse 10,000 mm/min - B-axis --> 40 °/s -> Speeds 0 - 1,100 min/-1 - Workpiece table --> 0 - 1,100 min/-1 Translated with (free version)

Year of construction: 1966, Condition: good (used), A used eccentric press Weingarten in good condition with pneumatic engagement, piece counter, documentation, press test book, spare parts 2 pallets pressure 1500 kN (150 tons) stroke 60 mm Dobeir I Slj Engqgout ram small / large stroke 10 - 140 mm throat 550 mm Cylindrical holder 30 mm Table W x D 1200 x 1000 mm dimensions W x D x H 150 x 270 x 290 cm Weight 13.500 kg Tech. Data and dimensions: Errors excepted.

Condition: used, Year of construction: 2022, BIOBASE BK-CA1000D CO2 incubator, built in 2022, volume: 1,000 l, W/H/D approx. 1,400 / 1,870 / 840 mm, various rust spots Deb Engswhwznsqgout Note: This is a starting price. The sale will be conducted in an online auction against the highest bidder (plus buyer's premium and VAT). Please follow the link for more photos and information.

Condition: excellent (used), mileage: 732,445 km, power: 308 kW (418.76 HP), first registration: 11/2013, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x2, loading space length: 9,150 mm, Equipment: tail-lift, Volvo FM410EEV/Carrier/LBW/Air Conditioning/7x available • Manufacturer: Volvo • Type: FM410 EEV • Mileage: 732,445 km • First registered: 11/2013 • Unladen weight: 12,900 kg • Payload: 13,100 kg • Gross vehicle weight: 26,000 kg • Power: 308 kW/418 hp • Transmission: Automatic • Wheel configuration: 6x2 • Suspension: Air/air • Carrier Supra 950U • -30°C cooling • Air conditioning • Rear view camera • Roof hatch • Wüllhorst tailboard • Lift-steer axle • Euro: EEV1 • German vehicle • German papers • Ready for immediate use • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. Dueb Eswhktwjngqgjt - Sale subject to our terms and conditions.

Condition: excellent (used), Functionality: fully functional, Advanced Energy Industries, Inc. High Power RF Generator, Rev. D, 40000095XX Dsb Eswidndjngqgsut Model: 40000095XX Condition: Used Technical Specifications: HPG

Condition: good (used), Item: D-7030-Foxboro Mass Flow Transmitter Djb Engqsh A Ha Eogsut Foxboro, Mass Flow Transmitter Complete with display and deaeration tank 2" Model CFT50 Max temperature 60 C

Condition: like new (used), Year of construction: 2010, max. wheel diameter 210 mm gear width 350 mm max. module 4 min. module 0,3 Control Siemens 840 D Powerline turning speeds 300 - 4000 U/min maximum axial offset 300 mm tailstock adjustment 350 mm swival range +/- 40 ° total power requirement 46 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 6,2 x 2,9 x 3,5 m Genesis 210HiC - Vertical Hobbing Machines with Optional Chamfer Rolling. The Genesis Hobbing Machines with vertical workpiece axis offer highly productive gear hobbing with optional chamfering and deburring capability. Workpiece diameter, max. 210 mm. Module, max. 3/4* mm. Duobou A I Dbe Engqget Workstation consisting of: -- Gleason milling machine "Genesisi 210 HIC" -- Borries embosser 315 WP-C -- Promot-Automation "loading and unloading unit"

Condition: used, Dear Sirs, We offer you modular systems of small crane systems of the companies "DEMAG" and "ABUS" used, partly as good as new, at favourable conditions. The systems are tailored to your needs. In case of inquiries, please tell us whether you want to carry out a linear or area-wide transport. Furthermore, we need your information on the load capacity, crane girder and track lengths, suspension distances, roof pitches and type of ceiling construction. Please tell us your lifting problems. Duob Engqop Dhbsgot Furthermore, we can offer you the electric chain hoists at favorable conditions.

Condition: used, machine/vehicle number: 1101284208R002, WITEG WAC-80R (PED) autoclave, volume: 80 l, W/H/D approx. 815 / 1,200 / 585 mm, on casters, integrated printer, power cable defective Duob Eswhwywongqgjt Note: This is a starting price. The sale will be conducted in an online auction against the highest bidder (plus buyer's premium and VAT). Please follow the link for more photos and information.

Condition: used, • The assembled machine can be viewed in D. Weisense until the end of April. • Type - PARTICA GLP 3000 • Year of manufacture – 2013 • No. GG 1800-0690 • With 3 axes • Numerous diamond and polishing tools Dujb Esv Tya Sengqgjt • Dimensions: W 5200 x D 2900 x H 2000 mm • Travels approx. 3150 x 1415 mm • 16-station tool changer • Weight: 4300 kg Very good condition, little used, from a small company.

Condition: used, Year of construction: 2003, turning diameter 120 mm turning length 650 mm control SINUMERIK 840 D swing diameter 250 mm spindle distance 900 mm 300 mm 650 mm 180 mm 650 mm +/- 40 mm 175 mm 670 mm main spindle bore 42 mm 25 kW 35 - 7000 U/min max. 200 Nm 42 mm 35 - 7000 U/min max. 200 Nm 2 x 2000 U/min 150 Nm rapid traverse x + z axis 30 m/min 15 m/min x3 = 15 m/min z3 = 30 m/min 2 x 12 Pos 2 x 12 30 mm Dsbevx Uz Ij Engqgsut DIN 69880 max. 4000 U/min 20 Nm internal coolant system feed ja / yes chip conveyor Bürener kW Number of working hours 35730 h total power requirement 65 kW weight of the machine ca. 10,4 t dimensions of the machine ca. 7 x 3 x 2,7 m CNC turning center Gildemeister Twin 42, with loading automatisation. Tool holder and documentation are going with.

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Year of manufacture: 2000 2025 Refurbished Generator: 70 amps, multipulse Control: Mitsubishi - 64 bit CNC Programming station software MultiProg Travel paths (X, Y, Z): 525 x 400 x 450 mm Work container (W x D x H): 750 x 650 x 420mm Workpiece clamping table: (W x D) 730 x 630 mm Electrode changer: 20-way plate changer Accessories: CO2 fire extinguishing system, integrated cartridge filter system Refurbished Dobev Avg To Engqgjut

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Dob Eoul Etdengqgjut Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min

Year of construction: 1990, Condition: used, a used well preserved cold circular saw OMP Saw blade 425mm cutting range 90° 150mm Two cutting speeds 13/26m/min Feed speed infinitely variable Length stop with roller conveyor 3000mm infeed 2000mm Dueb Engqscmn Evegot Cooling device

Year of construction: 2022, Condition: used, CO2 incubator PHCBI MCO-801C-PE, built in 2022, volume: 851 l, W/H/D approx. 970 / 2,040 / 850 mm Duob Engewhwydoqgot Note: This is a starting price. The sale will be conducted in an online auction against the highest bidder (plus buyer's premium and VAT). Please follow the link for more photos and information.

Year of construction: 2009, Condition: new, belt dimensions 2000x100mm Belt speed 30m/sec Angle adjustable from 30 to 90 Power 3kW 4000V50Hz Weight 200kg Rollers for grinding rye 3/4";1/2"; 1"; 11/4" Dueb Engex Daveqgot

Condition: excellent (used), 1 permanent - magnetic Chuck D = 315 mm with mounting flange DIN 55027 Gr. 6 Duob Enjd Eaauegqget