Used Isal Pb120 D for sale (8,521)

Condition: excellent (used), Year of construction: 2002, 1 WEISHAUPT G7/1-D, gas burner with gas train. -Output: 250-1550 kW -Version: ZD-LN -Year of manufacture: 2002 2 WEISHAUPT G7/1-D, gas burner with gas train. -Output: 250-1750 kW -Version: ZM -Year of manufacture: 2002 Fpedpfxewgykce Ac Hop

Year of construction: 2015, condition: ready for operation (used), A manual parts cleaning machine D.W. Renzmann for the printing industry with exhaust air system is available. Useful dimensions X/Y/Z: 1800mm/600mm/300mm, washing pump capacity: 5m³/h, internal extraction: 2000m³/h and 1.1kW, dimensions X/Y/Z: approx. 2900mm/1200mm/1800mm. Documentation available. On-site inspection is possible. Fpsdpotul Nvsfx Ac Hsp

Condition: excellent (used), Conveyor belt for envelope inserting system BB Total length: 2.5 m Width: 400 mm Fpjdew Nxxvspfx Ac Hep Belt width: 340 mm

Condition: new, Spindle speed 9000rpm, Spindle motor 4kw, Cutter cycle motor 0.75kw, Maximum tenon width 100+2RMmm Fpedpfen Nwdljx Ac Hsp Maximum tenon thickness 30mm Maximum tenon depth (shoulder) 50mm Table tilt upwards 0-15 degrees Table tilt downward 0-30 degrees Table tilt side 0-20 degrees Table fence adjustable 90 to 45 degrees Pneumatic adjustable work place clamps x 2 PLC operation TCT disposable tip cutter block Overall dimensions 1300 x 1200 x 1600mm Weight 950kg

Condition: used, Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose - Hose: PA / TPU / D inside = 14 -Interior diameter: 14 mm -Outer diameter: 16 mm -Wall thickness: 1 mm -Length: 98 m Fpedpfod Dv Raox Ac Hop -Quantity: 1x roll available -Transport dimensions: 800/800 / H535 mm -Weight: 36 kg

Condition: used, maximum load weight: 33,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 6,000 mm, loading space volume: 29 m³, total width: 2,470 mm, total height: 3,900 mm, Year of construction: 2025, Equipment: ABS, D-TEC 3-axle container chassis 20 FT ADR with VANHOOL single-chamber pressurized tank, 29 cbm First registered April 2025 Tank container built in 2006 Unladen weight 5,640 kg Steel chassis, fully spray-galvanized and painted in 2-layer RAL 9005 Fifth wheel height 1,180 mm Tires: 6 x 385/65 R 22.5 Hankook High-gloss aluminum rims All-LED lighting, round rear headlights 2 x LED work lights Fpedpfjwdkllsx Ac Hsp SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE KNORR Trailer EBS VANHOOL 20 FT tank container, V2A stainless steel Single-chamber 29,362 L volume Test pressure 2.86 bar Operating pressure 2 bar Door cover DN500 Outlet at the rear center of the stainless steel casing RENTING is the new BUYING. Rental or full-service leasing is available immediately.-----

Year of construction: 2017, condition: excellent (used), Machine number: Y201095 Built in: 2017 Size: DL-C4 mm Speed: 10.000 c/h Fpjdpfx Ael Dxq Usc Hjp Equipment • 6 station base • 5 rotary feeder • 1 inserting station • 1 reject gate • 1 envelope feeder • 1 belt delivery optional equipment: -- not included -- • extra rotary feeders • shuttle feeders • delivery system Condition: good working, machine can be inspected in production

Condition: ready for operation (used), Functions according to the magnetic particle technology, with documentation and accessories, an inspection is possible. Fsdpfx Acsq Npf Ue Hepp

Condition: excellent (used), Year of construction: 2012, Meyn Deboner Type: D40 Deboner type: poultry thighs and drumsticks Performance: up to 2400 pieces per hour depending on application Fpjdpsqwguyofx Ac Hsp Dimensions: 1500x1300x2000 Weight: 500 kg Year : 2012 We encourage a personal inspection, where you can assess the machine on-site, evaluate its performance, and confirm its high quality Preview Video

Condition: used, axle configuration: 3 axles, first registration: 10/2017, color: other, Year of construction: 2017, Empty weight: 6.250 kg Axle 1: left 8 mm right 8 mm Axle 2: left14 mm right 14 mm Fodpfx Aowzx Ipec Hjpp Axle 3: left 14 mm right 11 mm

Condition: good (used), door magnet, door magnet, holding magnets, fire door -Type: GT 70 A 001 -Voltage: 24 V 8 W -Holding force: 2000 N -Quantity: 5x magnets available -Price: per piece Fpjdpfocb T R Hjx Ac Hop -Dimensions: Ø 70 x 35 mm -Weight: 0.83 kg

Condition: used, Year of construction: 2016, operating hours: 2,012 h, The Isal PB 106 E is a practical ride-on sweeper that makes sweeping fun. This electric machine is operated by means of a throttle lever on the handlebars (just like on a motorcycle) and drives exceptionally smoothly through corners. The direct sweeping system ensures that the brush lasts a long time and little dust is raised while sweeping. After sweeping, you manually empty the 64 L trash can into the bin. This is a machine ideal for medium to large indoor areas, and thanks to the left and right side brushes, you'll sweep past racks, pallets and other obstacles with ease. It is made of a sturdy sheet steel chassis, making it able to withstand a good deal. All parts are also easily accessible, making it easy to perform maintenance. The Isal PB 106 E is very user-friendly and can be used by anyone on the shop floor. Other specifications: - Theoretical capacity: 6,500 sq. ft, - Sweeping width of main brush: 70 cm, Fodpfxsnyir Eo Ac Hspp - Sweeping width with 1 side brush: 90 cm, - Sweeping width with 2 side brushes: 105 cm, - Battery working time: 3 hours, - Power source: 24 V, - Dumpster capacity: 64 L, - High-loss system: No, - Traction on: rear wheels, - Maximum speed: 6.2 km/h, - Maximum slope angle: 14%, - Filter type: panel filter, - Filter surface area: 3.5 m², - Weight (without batteries): 221 kg, - Weight (with batteries): 478 kg, - Dimensions (LxWxH): 140 x 92 x 123 cm, All our used cars come standard with: - Complete service, - New brushes, - New battery pack, - Free on-site delivery, - New wear parts and rubbers, - Service and overhaul, - Explanation and instruction, - Brushes and accessories tailored to your floor. Would you like to know more about the Isal PB 106 E sweeper? Then contact us, we will be happy to tell you more about it.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, safety light barrier, skyCUBE XLs class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XLs class, produced by PFEIFER technology in Saxony, Germany, is engineered for your professional cutting tasks. It combines advanced productivity with economic efficiency and precision. The machine housing is manufactured from welded and bolted steel construction, specifically designed for industrial and commercial applications. The drive system developed by PFEIFER technology ensures both precision and high repeat accuracy. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, providing you with maximum safety. The ergonomic design with a pull-out worktable facilitates easy loading of the machine. Drawers in the lower section collect cutting residues efficiently. The skyCUBE laser software with file import capability generates precise laser cutting geometries for your requirements. Fpedjw Ebzmspfx Ac Hop Optimize your cutting quality and speed—even with thick materials—thanks to the 6kW laser power, including when using compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Monitor your production with ease: the large front doors allow convenient access to the entire working area. Position the operator console wherever you prefer. It is mobile, providing optimal visibility of the cutting process at all times. Naturally, your safety is the highest priority when operating the skyCUBE laser! The skyCUBE XLs is a Class 1 laser system. There is no risk of coming into contact with laser beam emissions or reflections during operation. With all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass panels and a perfectly shielded cutting area reliably protect you from laser radiation risks, while an independent safety system enables loading without interrupting production. Select the laser power that best suits your requirements; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a factory-new laser machine from our own production) Maximum dimensions (L × W × H): 2310 × 8505 × 2505 mm / Laser machine: 4.0 T Power supply: depends on laser source (6kW), 400V/50Hz, 3-phase / 27kW Process gas control for: oxygen / nitrogen / compressed air according to material and process

Condition: new, maximum load weight: 30,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,770 mm, Year of construction: 2025, Equipment: ABS, Equipment: * Tank volume 30m3, Ø2200mm, wall thickness 3mm, temperature 0-60°C * Extended swivel pipe * 4" flushing line with 2 free falls of 2.5", 1x at the front and 1x in the middle of the tank. * Flushing line on the left side ü Tension cables over the hose trays * Automatic pump shutdown. ü Axle also equipped with anti-spray mat * Bracket with 2 wheel chocks * Left and right (narrow and high) hose racks, each 5m, made of galvanized steel (250mm wide, 190mm high). Pump * Vogelsang pump, 6,000L / min. Axles * 9 ton axles Valx Ø430 disc brake, ET120 Brake * EBS braking system Wabco * TPMS ü Wabco Tire Pressure Monitoring System in accordance with R141 * No electronic air suspension Extra options * Third axle as a trailing axle. Lift axle * Automatic lift axle on the first axle automatically switched depending on the load, or by applying the brake 3 times. * With traction aid, load on the 2nd and 3rd axle up to 130% under 30 km/h. Tire size * Tire size 385/65 R22.5 Tires * Apollo Lighting * 24 volt lighting device Lighting options * Flashing side marker lights * Work lights left and right, on the first axle. * 2x LED work lights at the rear. 1x left, 1x right mounted on the hose racks Fpedpfxswwn Abs Ac Hsp Painting Painting of the tank in RAL 7030 STONE GRAY * Painting of the chassis in RAL7016 ANTHRACITE GRAY Other * Free fall connection at the rear of the pump. Connection with manual fitting 6? ball valve for emptying the tank, venting container made of V2A * Docking funnel 8? at the top of the rear. Pipe down to the bottom of the tank with a manual slide.

Condition: good (used), functionality: fully functional, Year of construction: 2021, operating hours: 937 h, 3D printer manufacturer 3D Systems Project 2500 plus Year of construction 2021 Total printing time 937 hrs. Fpedpfxsuvinge Ac Hep

Condition: new, shuttle feeder AS 25 / R (right) for Buhrs BB 300-10K other Buhrs BB 300 systems needs extra adapter plug new feeder in colour RAL 7035 Fodpfx Aed Stryoc Hjpp

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 3.01 E -Class: 8502 Fodpfx Asd Spi Rec Hjpp -Price: per piece -Quantity: 17 pieces -Dimensions: 88/49/H75 mm -Weight: 0.4 kg/piece

Condition: new, functionality: fully functional, machine/vehicle number: D-CL-440-FR-EC, input voltage: 230 V, overall weight: 50 kg, total width: 550 mm, total length: 450 mm, total height: 1,430 mm, volume flow: 450 m³/h, noise level: 58 dB, Equipment: rotational speed infinitely variable, type plate available, ISI D-CLEANER Mechanical air filter device (dust) Type: 440 FR Fpsdpfxsvrxc Ae Ac Hop Design: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for dust separation. TECHNICAL DESCRIPTION: Air volume: - 450 m³/h (free blowing) (depending on the filter configuration without collection elements) Air inlet opening: baffle plate as pre-separator Intake nozzle: 100 mm (on the left side) Filter configuration: - filter cartridge (dust class M according to DIN EN 60335-2-69 Appendix AA) - compressed air cleaning via rotary vane nozzle Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 db (A)) Dimensions: length 450 mm / width 550 mm / height 1430 mm Weight: 50 kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, table length: 3,050 mm, table width: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: cooling unit, safety light barrier, skyCUBE XL class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XL class, manufactured by PFEIFER technology in Saxony, Germany, has been designed for your professional cutting applications. It combines a new level of productivity with cost-effectiveness and precision. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, offering you the highest level of safety. The ergonomic design with a pull-out worktable makes machine loading easier. Drawers in the lower section of the machine collect cutting waste. Optimize quality and cutting speed even with thick materials thanks to 6kW laser power—even when cutting with compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Naturally, you’re always on the safe side when operating the skyCUBE laser! The skyTUBE Pro is a Class 1 laser system. There is no risk of exposure to laser beam emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Fpsdpet A N A Rjfx Ac Hsp Special safety glass and a perfectly shielded cutting area reliably protect you from the hazards of laser radiation, while an independent safety system allows loading without interrupting production. Select the laser power best suited to your needs; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a brand-new laser machine manufactured by us) Maximum dimensions (L×W×H): 2310×8505×2505 mm / Laser machine 4.0 T Power supply depending on laser source (6kW) 400V/50Hz 3 phase / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on material and process Laser processing made easy and highly precise – high-speed, high-quality laser cutting

Condition: new, maximum load weight: 28,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, Year of construction: 2025, Equipment: ABS, Equipment * FV2011_20_R295 D-TEC TANK TRAILER FV2011-20-R295 (29.5m3) Temp. 0 - 60°C * Forced steering Construction * 8" docking funnel at the top of the rear, behind the tank. Lockable with a manual slide. * Direct idling at the rear * Automatic pump shutdown. * Lincoln brand central lubrication for perfect lubrication on * time basis of slewing rings and axles. (for drum brake 36P) * Bracket with 2 wheel chocks Pump * Vogelsang pump, 6,000L / min. Axles * Valx axles with drum brakes, 9 tons. ET 0. Brake * EBS braking system Wabco * Wabco Tire Pressure Monitoring System in accordance with R141 * TPMS Tire size * Tire size 385/65 R22.5 9t Tires * APOLLO Lighting * 24 volt lighting device * Flashing side marker lights * Work lights left and right, on the first axle. * 2x LED work lights at the rear. 1x left, 1x right mounted on the hose racks * 2x 7-pin connection + standard 15-pin connection Accessories * Ball valves for completely emptying the tank * Stainless steel ventilation tank Paint finish * Tank painted in RAL 7030 STONE GRAY Fpodpfevnkmrjx Ac Hep * Chassis painted in RAL 7016 ANTHRACITE GRAY The photos may show other equipment.

Condition: refurbished (used), functionality: fully functional, SL2 Autoloader with feeder for Buhrs (W+D) BB 700 inserting system Including integration kit for Buhrs (W+D) RF2 rotary feeder Including integration kit for Buhrs (W+D) HF2 friction feeder Fpsdpfx Ajwf Nv Ssc Hep

Condition: used, Door hold-open magnet, door magnet, hold-open magnets, fire door -Type: GT 50 A 002 -Voltage: 24 V 5 W. -Holding force: 750 N Fsdpfx Acecb T R Eo Hjpp -Number: 15x magnets available -Price: per piece -Dimensions: Ø 50 x 30 mm -Weight: 0.35 kg

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, working length: 1,250 mm, working width: 1,250 mm, Equipment: CE marking, cooling unit, documentation/manual, P class = processing area X 1250 mm x Y 1250 mm x Z 100 mm High-precision linear motor axis system with 6 KW laser power (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Simple and highly precise laser processing - laser cutting at high speed and quality Fpedpfx Aok Ran Eec Hep

Condition: refurbished (used), Buhrs rotation feeder AT 25 - R/R for inserting system Buhrs BB 300 Fedpfxjip Ub Aj Ac Hjpp

Condition: used, D-SUB plug socket Fedjb A Ntzepfx Ac Hspp -25 pollen -Type: D-SUB -Number: 45x available -Price: complete -Weight: 0.5 kg