Used Isal Pb200 D for sale (8,619)

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, Fully automatic flow-wrapping machine for packaging products - regardless of their length - in full wrap full wrap and without film overlap. The product is fed in via a conveyor belt with simultaneous simultaneously wrapped in a semi-tubular film via a forming shoulder. The product is clocked in via a light barrier. The infeed belt can be easily adjusted to different product widths. The longitudinal seal is produced by a continuous side sealing device. The height of the The height of the forming shoulder and welding devices can be adjusted manually. Wear parts and defective parts have been replaced. The machine was technically inspected at Kallfass and is fully functional. Technical data Cross sealing stamp: 450 mm Film: semi-tubular film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 600 mm Min. product length: 120 mm Min. product width: 80 mm Passage height: 200 mm Working height: 780 - 930 mm Fjlimsufy Iuecy Uopg Power connection: 400 Volt three-phase current, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Tunnel opening width: 650 mm Tunnel outlet height: 200 mm Viewings and demonstrations are possible on our premises by prior arrangement. Functional guarantee, no warranty

Condition: used, Year of construction: 1988, x-travel 310 mm y-travel 340 mm z-travel 170 mm total power requirement 2,5 kW weight of the machine ca. 900 kg dimensions of the machine ca. m Fpslimcjt Hxatjy Uog

Condition: good (used), Year of construction: 1986, machine/vehicle number: 2967, Tränklein gluing machine ZW-D 500, with cardboard device, machine number 2967, built in 1986, machine is in good condition, available immediately If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment. Fjlimcjvvirisy Uepg

Condition: used, Year of construction: 2024, Laser power: 3000 Watt Rundrohr: 15 - 230 mm Quadratrohr: 15 x 15 - 230 x 230 mm Rechteckrohr: 15 x15 - 230 x 230 mm max. Positioniergenauigkeit X,Y-Achse: 0,05/1000 mm max. Positioniergenauigkeit U-Achse: 0,05/1000 mm Max. steel: 10 mm Max. stainless steel: 8 mm Max. aluminium: 8 mm max. tube weight: 40 kg/m max. tube weight: 240 kg Felijuqiarsmcy Uopg Length: 14000 mm Width: 2000 mm Height: 3000 mm

Condition: used, mileage: 27,202 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 01/2021, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal number: 1352. B213811 ---- EQUIPMENT * Navi 50 IntelliLink Pro DAB+ - 7" touchscreen, voice control for telephone/audio/navigation - Bluetooth audio streaming - automatic music recognition (title, album, etc.) - access to internet radio and news - hands-free system via Bluetooth interface - display of phone book and call list - navigation system with integrated memory - maps for Western Europe (3D) - dynamic route guidance - TMC - GPS module - smartphone integration (Apple CarPlay/Android Auto) - USB interface - double tuner - graphic equalizer - 2 speakers * Seat: multifunctional double seat with foldable middle seat - rotating laptop shelf on the backrest and integrated storage compartments under the fold-down seat * electronic ABS * storage gallery above the windshield * driver's side airbag * electrically adjustable and heated exterior mirrors * Doors: sheet metal insert without window, driver's side * on-board computer * tachometer * ESP, electronic stability program with hill start assist, trailer stability program and optimized transaction control * Electric windows, front * Wing doors, rear, 180° opening angle, sheet metal * Gearbox: 6-speed transmission * Belts: 3-point seat belts, front - height adjustable on the outside * Headrests (3) height adjustable * Fuel tank 80 l * Paintwork: Solid paintwork * Doors: Sliding door, passenger side, without window * Cargo area lighting * Steering column, height adjustable * Heating and ventilation system with particle and odor filter, front * Upholstery - fabric * Quickheat quick heating system * Particle filter: Soot particle filter for diesel with SCR - AdBlue * Crosswind assistant - Automatically detects crosswind turbulence and stabilizes the vehicle * Power steering * Visibility equipment - Rain sensor - Automatic dipped beam * Seat: Passenger double seat bench * Seat: Driver's seat, 6-way adjustable with armrest * Socket, 12 volts at the front * Daytime running lights in LED * Blind spot mirror in passenger sun visor * Partition, closed * Anchoring points in the cargo area * Lashing eyes on the loading area * Immobilizer * Heat-insulating glazing, tinted green * Central locking with radio remote control ... and much more ----The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. Fpjliovvqd Hjmcy Uog We are happy to accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: ready for operation (used), Table top Ø2,500 mm with M 56 transport threads. 14 T-slots 22 H12 DIN 650. spacing 160 mm, symmetrically arranged 1 flat groove 22 H7x10 deep lengthwise through centre Ø100 H7x20 deep 1 flat keyway 22 H7x10 deep crosswise through centre Ø100 H7x20 deep Version with INA YRT axial/radial bearing Permissible transport load 20,000 kg (horizontal position) Felijlruhljmcy Uspg Speed 4/min (maximum 6.25 = 3.00/480) Axial run-out accuracy of table top 0.020 mm (Ø1.000) Concentricity of the centre centring 0.015 mm Partial accuracy ±3 angular seconds through direct path measurement in the table axis Incremental rotary encoder HEIDENHAIN ROD 880 C (reference distance-coded) Measuring system with coupling is included in the scope of delivery! Hydraulic power unit for table clamping (63 bar) with control and top pressure valve mounted on the rotary table base body with unhindered access to the fixators! Two pressure switches for monitoring the table clamping (clamped/released) Permissible tilting moment 13,000 Nm (clamped) Permissible tangential torque 4,000 Nm (clamped) SIEMENS feed motor 1FT6105-8AF71-4AL1 with 31 Nm, 3,000/min (Mo/100=50 Nm) Version with brake, smooth shaft (SHW 0287.0222) Length 416 mm from flange Existing output torque with 1FT6105 is max. 6,000 Nm (50x480x0.25) SIEMENS feed motor is included in delivery! Cables for motor are routed directly to the control unit. All electrical cables are wired to a central terminal box with cover for attachments to protect against coolant and chips!

Condition: refurbished (used), Year of construction: 2006, Fully automatic flow-wrapping machine for packaging products - regardless of their length - in full wrap full wrap and without film overlap. The product is fed in via a conveyor belt with simultaneous simultaneously wrapped in a semi-tubular film via a forming shoulder. The product is clocked in via a light barrier. The infeed belt can be easily adjusted to different product widths. The longitudinal seal is produced by a continuous side sealing device. The height of the The height of the forming shoulder and welding devices can be adjusted manually. Fpelimcoufh Amjy Usg Wear parts and defective parts have been replaced. The machine was technically inspected at Kallfass and is fully functional. Technical data Cross sealing stamp: 750 mm Film: semi-tubular film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 900 mm Min. product length: 120 mm Min. product width: 80 mm Passage height: 300 mm Working height: 780 - 930 mm Power connection: 400 Volt three-phase current, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Tunnel opening width: 650 mm Tunnel outlet height: 200 mm Viewings and demonstrations are possible on our premises by prior arrangement. Functional guarantee, no warranty

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Fslimst Hwzpscy Uepg Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, color: yellow, Year of construction: 2016, operating hours: 1,327 h, Field of application: Construction Fjlimcsu Uay Noy Uopg Empty weight: 1.650 kg Make of engine: Kubota D1105 Please contact Sales Department for more information

Condition: used, Year of construction: 2024, Laser power: 4000 Watt Rundrohr: 20-350 mm Quadratrohr: 20 x 20 - 350 x 350 mm Rechteckrohr: 20 x 20 - 350 x 350 mm max. Positioniergenauigkeit X,Y-Achse: 0,05/1000 mm max. Positioniergenauigkeit U-Achse: 0,05/1000 mm Max. steel: 10 mm Max. stainless steel: 8 mm Max. aluminium: 8 mm max. tube weight: 500 kg Length: 14000 mm Felimcsuqiafey Uspg Width: 2000 mm Height: 3000 mm

Condition: good (used), Year of construction: 2001, Manufacturer Mayfran Type D 60 Type chip conveyor Condition used Fslisvu R Ddsmcy Ujpg Dimensions Length 3500 mm Width 620 mm Height 1550 mm Height 350 mm

Condition: used, TECHNICAL DETAILS - max. diameter of tapping and threading : M6 - max. length of stroke : 20 [mm] - number of spindle revolutions with interchangeable gearboxes : 4200, 2700, 1600, 1050, 620 [rpm] Fjlimcysvu E S Aj Uspg - power : 0.5 [CV] - number of revolutions : 1400 [rpm] - brake motor protected against overheating by 3 pilotherms

Condition: used, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Feliju U D N Ujmcy Uspg

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Fpolimcyet Hwq Dj Ueg Please ask for further details.

Condition: excellent (used), machine/vehicle number: 26720686, Measuring plate X = 3000 mm Y = 6000 mm Price: on request! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, information Fpelimcyoff Ea Ho Ujg and prices as well as prior sale reserved)

Condition: used, Year of construction: 2024, Laser power: 4000 Watt Rundrohr: 15 - 230 mm Quadratrohr: 15 x 15 - 230 x 230 mm Rechteckrohr: 15 x15 - 230 x 230 mm max. Positioniergenauigkeit X,Y-Achse: 0,05/1000 mm max. Positioniergenauigkeit U-Achse: 0,05/1000 mm Fjlimouqh Tqocy Uopg Max. steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm max. tube weight: 40 kg/m max. tube weight: 240 kg Length: 14000 mm Width: 2000 mm Height: 3000 mm

Condition: new, SPRING BALANCE with safety equipment in accordance with DIN 15112 Brand DALEX Type D 6/130 Tar load 115-130 kg Cable extension 3 m Suspension safety hook, rotatable and pivotable Load capacity continuously adjustable via adjustment screw Spring break protection Fslievr Elqsmcy Uopg Weight: 44 kg unused / as good as new / minor signs of storage

Condition: used, TECHNICAL DETAILS - max. diameter of tapping and threading : M6 - max. length of stroke : 20 [mm] - number of spindle revolutions with interchangeable gearboxes : 4200, 2700, 1600, 1050, 620 [rpm] - power : 0.5 [CV] - number of revolutions : 1400 [rpm] - brake motor protected against overheating by 3 pilotherms Fpolovu E Svoimcy Ujg

Condition: used, Ferwood Code: RU0001074 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Fpeleu U D Nneimcy Uog

Condition: reconditioned (used), Year of construction: 1982, The machine has been partially overhauled. Technical data: Center height: 215 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 1/min Tailstock holder: MK 4 Quill stroke: 150 mm Feed rates: Longitudinal slide: 0.06 - 0.8 mm/rev cross slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 110 x 1750 mm Equipment: - 3-axis digital readout, Heidenhain brand Fpolimcetmtpkey Usg - 3-jaw lathe chuck, Forkardt brand 200 mm - Emergency stop button - Multifix quick-change holder system - Pull spindle cover - Lathe chuck guard with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides in X- and Z_0-axis ground - Tool holder of the tailstock quill ground - Wiper replaced - Partially replaced handwheels - Glass scales overhauled - Test report of the machine geometry created in accordance with DIN 8605

Year of construction: 1999, Condition: good (used), Technical data Type: SMM-D Manufacturer company: ZEISS Type of construction: single- and multi-pedestal design Drives: Highly dynamic DC servo drives, electronically monitored in all axes Control system: Multi-microcomputer system with 3-axis vector control for optimum control behaviour 4th and 5th axis rotary-pivot device DSE 05 Control panel for operation at remote measuring location Manual control of measuring device and DSE 05 via control lever with progressive characteristic, switchable to creep speed Protection class IP 54 for control and operating panel Display of the workpiece or device coordinates by display on the control panel or via the screen on the computer Measuring plate X = 16000 mm Y = 6100 mm Measuring volume X = 8000 mm Y = 3100 mm Fpelimcyjcilvve Ueg Z = 2700 mm Scanning head rotary swivel unit DSE 05 Motorized rotation in two orthogonal axes by +- 180° each Incremental measuring system with 0.5* resolution Angular speed up to 40°/second Angular position deviation +- 3 max. Torque: 140 Nm Max. Sensor weight: 1000g Repeatability <=1µm/200mm Performance data Length measuring systems: electro-optical incident light system, resolution 1µm Travel speed: Automatic mode: 0 - 150 mm/s set-up mode: 0 - 80 mm/s Installation and commissioning by our service partners possible. Price: on request We will be happy to provide you with a detailed offer. Note: Our offer is directed at

Condition: used, Year of construction: 2024, Laser power: 12000 Watt Working range laser: 3050 x 1550 x 270 mm positioning speed X/Y/Z: 90 m / min simultanious: 120 m / min Max. workpiece weight: 1000 kg Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Fslimcyeuqh S Tj Uspg Max. copper: 10 mm Max. brass: 20 mm Length: 8550 mm Width: 3050 mm Height: 2600 mm Machine weight: 8100 kg

Condition: used, Ferwood Code: RU0001069 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Fjlimeu U D Haecy Uopg

Year of construction: 1999, Condition: good (used), Technical data on request! Felscilwgsimcy Uopg Assembly and commissioning by our service partners possible. Price: on request We will be happy to provide you with a detailed offer. Note: Our offer is aimed exclusively at professional customers. (Changes and errors in the technical data, specifications and and prices as well as subject to prior sale)

Condition: used, Ferwood Code: RU0001071 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Fslimcyeu U D Ahs Ujpg