Used Pallet racks & open storage shelves for sale (11)

Condition: excellent (used), Year of construction: 2010, Operating hours: 1,000 h, machine/vehicle number: Plaat stelling, Heavy plate rack total (3500 KG) for handling with a forklift Plates up to 2500KG stored safely Hxbgqbqv7p and easily accessible!!

Condition: good (used), Year of construction: 2008, Manufacturer: Stanley Vidmar Type : Hazmat Besfqmz3vue Inclusion dimensions: 7500 x 3581 x 4741 mm Year: 2008 Shelf load capacity: 1000 kg Column load capacity: 4000 kg Number of shelves: 60 pcs Number of leg frames: 16 pcs The equipment is a hand-operated, fork-lift stacking crane, the purpose of which is to service the STAK system warehouse storage rack. The nominal load capacity of the crane is 1000 kg. On the stand, the loads are stored on removable steel sheet pallets (pallets) with a permissible load capacity of 1,000 kg each. The load is lifted with the crane together with the pallet or is placed. The design of the rack structure allows the pallets to be arranged as needed with a height division of 98 mm. The crane moves in the area between the rows of racks installed on both sides, and even has a run-out section at one end of the track for loading onto a forklift. A pair of rigid, U-section columns from the crane below the crane, which ensures the vertical guidance of the fork structure. The guide column is connected to the trolley with a ball ring, and this enables the load to be rotated completely. The lifting is done by an electric chain lifting drum, which is located on top of the rotor. The trolley rolls freely between the crane's two I-section main supports. In the longitudinal direction, the structure rolls freely on two rails placed on top of the rack rows. On the runway section, the track cantilever extends beyond the row of scaffolding. There are handles on the back side of the column, which are used to move the structure longitudinally and transversely and rotate it. The control box that operates the hoist is also located here. Security solutions: - the running of the crane from the track is prevented by stops - in the end position, the lifting movement is stopped by an electric switch - the control box is equipped with a key switch - the main circuit is locked by a safety magnetic switch - the fork structure is equipped with a gripper

load capacity per storage section: 1,500 kg, total width: 100 cm, total length: 137 cm, carrying capacity: 1,500 kg, Condition: new, Year of construction: 2023, Manuracks allow maximum use of warehouse space. The construction of the pallets makes it possible to stack them in multi-level structures. Manurack pallets are a special type of post pallet. Pallets of this type consist of a base and retractable support tubes. Such a system allows quick assembly and disassembly. On the support tubes, successive manurack pallets can be stacked. The height of the individual floors of the stack can be adjusted by using tubes of different lengths, depending on the user's needs. Steel manurack pallets are modular structures. To build a manurack rack you need such components as a base and support tubes. The tubes are placed in the manurack's slots, thus creating pillars for the next base, which is another shelf of the rack. The racks can be expanded at any time with additional floors. Individual floors depending on the type of manurack can have a load capacity of 1500kg or 1800kg. Manurack single M1S - 1500kg Hot-dip galvanized finish Net price 110,00 euros - with a minimum order quantity of 50 pcs. Manurack single M2S - 1800kg Hot-dip galvanized finish Net price 120,00 euro - with a minimum order quantity of 50 pcs. The quoted prices do not include transportation. Each pallet of posts requires 4 support pipes, available in different sizes, depending on customer needs: 125, 160, 200cm. Zamrceys

Condition: new, PALLET RACKS GALVANIZED FOR OUTDOOR USE SPECIFICATIONS : H : ca. 450 cm D : ca. 110 cm L : approx. 11,20 running meter load : 3000 kg shelf load Stands in hot-dip galvanized crossbars 270 x 14 x 5 cm, T30 Cross beams in hot dip galvanized Brand new BLT / PR45 FVZ manufactured in Europe & tested according to current standard DIN EN 15512. 100% quality at the best price. Shelf consists of : 05 x upright approx. 450 cm x 110 cm, pre-assembled. 16 x crossbar approx. 270 x 14 x 5 cm, T30. 32 x locking pins. 32 x locking screw M8 x 20 incl. nut. Levels: Floor + 2 36 pallet spaces incl. floor spaces. -- IMMEDIATELY MULTIPLE AVAILABLE-- Price : Cik3dhsf8e 2450 € net plus legally valid VAT. You will receive an invoice with VAT. Delivery on request by us possible. Our recommendation : Let us know your needs... We will be happy to help you with the realization of your projects, from planning to ordering and installation. Customer Note : When mounting the locking pins / locking screws may have to be re-drilled holes glued by the hot-dip galvanizing. This can not be excluded with a high quality hot-dip galvanizing. If you have any questions, please contact us.

Condition: new, PALLET RACKS GALVANIZED FOR OUTDOOR USE SPECIFICATIONS : H : ca. 450 cm D : ca. 110 cm L : approx. 36,30 running meter load : 3000 kg shelf load Stands in hot-dip galvanized crossbars 270 x 14 x 5 cm, T30 Vwhmoq Crossbars in hot-dip galvanized Brand new BLT / PR45 FVZ manufactured in Europe & tested according to current standard DIN EN 15512. 100% quality at the best price. Shelf consists of : 014 x upright approx. 450 cm x 110 cm, pre-assembled. 052 x crossbar approx. 270 x 14 x 5 cm, T30. 104 x locking pins. 104 x locking screw M8 x 20 incl. nut. Levels: Floor + 2 117 pallet spaces incl. floor spaces. -- IMMEDIATELY MULTIPLE AVAILABLE-- Price : 7400 € net plus legally valid VAT. You will receive an invoice with VAT. Delivery on request by us possible. Our recommendation : Let us know your needs... We will be happy to help you with the realization of your projects, from planning to ordering and installation. Customer Note : When mounting the locking pins / locking screws may have to be re-drilled holes glued by the hot-dip galvanizing. This can not be excluded with a high quality hot-dip galvanizing. If you have any questions, please contact us.

Condition: new, PALLET RACKS GALVANIZED FOR OUTDOOR USE SPECIFICATIONS : H : ca. 450 cm D : ca. 110 cm L : approx. 14 running meters Load : 3000 kg shelf load Stands in hot-dip galvanized crossbars 270 x 14 x 5 cm, T30 Cross beams in hot dip galvanized Brand new BLT / PR45 FVZ manufactured in Europe & tested according to current standard DIN EN 15512. 100% quality at the best price. Shelf consists of : 06 x upright approx. 450 cm x 110 cm, pre-assembled. 20 x crossbar approx. 270 x 14 x 5 cm, T30. Cik2hqu0xh 40 x locking pins. 40 x locking screw M8 x 20 incl. nut. Levels: Floor + 2 45 pallet spaces incl. floor spaces. -- IMMEDIATELY MULTIPLE AVAILABLE-- Price : 2990 € net plus legally valid VAT. You will receive an invoice with VAT. Delivery on request by us possible. Our recommendation : Let us know your needs... We will be happy to help you with the realization of your projects, from planning to ordering and installation. Customer Note : When mounting the locking pins / locking screws may have to be re-drilled holes glued by the hot-dip galvanizing. This can not be excluded with a high quality hot-dip galvanizing. If you have any questions, please contact us.

Condition: new, PALLET RACKS GALVANIZED FOR OUTDOOR USE SPECIFICATIONS : H : ca. 450 cm D : ca. 110 cm L : approx. 100.16 linear meters Load : 3000 kg shelf load Stands in hot-dip galvanized crossbars 270 x 14 x 5 cm, T30 Crossbars in hot-dip galvanized Brand new BLT / PR45 FVZ manufactured in Europe & tested according to current standard DIN EN 15512. 100% quality at the best price. Shelf consists of : 037 x upright approx 450 cm x 110 cm, pre-assembled. 144 x crossbar approx. 270 x 14 x 5 cm, T30. 288 x locking pins. 288 x locking screw M8 x 20 incl. nut. Levels: Floor + 2 324 pallet spaces incl. floor spaces. -- IMMEDIATELY MULTIPLE AVAILABLE-- Price : 19900 € net plus legally valid VAT. You will receive an invoice with VAT. Ivtjqrg7m Delivery on request by us possible. Our recommendation : Let us know your needs... We will be happy to help you realize your projects, from planning to ordering and installation. Customer Note : When mounting the locking pins / locking screws may have to be re-drilled holes glued by the hot-dip galvanizing. This can not be excluded with a high quality hot-dip galvanizing. If you have any questions, please contact us.

Condition: new, PALLET RACKS GALVANIZED FOR OUTDOOR USE SPECIFICATIONS : H : ca. 450 cm D : ca. 110 cm L : approx. 36,30 running meter load : 3000 kg shelf load Stands in hot-dip galvanized Cilaiopyyd crossbars 270 x 14 x 5 cm, T30 Crossbars in hot-dip galvanized Brand new BLT / PR45 FVZ manufactured in Europe & tested according to current standard DIN EN 15512. 100% quality at the best price. Shelf consists of : 014 x upright approx. 450 cm x 110 cm, pre-assembled. 052 x crossbar approx. 270 x 14 x 5 cm, T30. 104 x locking pins. 104 x locking screw M8 x 20 incl. nut. Levels: Floor + 2 117 pallet spaces incl. floor spaces. -- IMMEDIATELY MULTIPLE AVAILABLE-- Price : 7400 € net plus legally valid VAT. You will receive an invoice with VAT. Delivery on request by us possible. Our recommendation : Let us know your needs... We will be happy to help you with the realization of your projects, from planning to ordering and installation. Customer Note : When mounting the locking pins / locking screws may have to be re-drilled holes glued by the hot-dip galvanizing. This can not be excluded with a high quality hot-dip galvanizing. If you have any questions, please contact us.

Condition: new, PALLET RACKS GALVANIZED FOR OUTDOOR USE SPECIFICATIONS : H : ca. 450 cm D : ca. 110 cm L : approx. 8,40 running meter Load : 3000 kg shelf load Stands in hot-dip galvanized crossbars 270 x 14 x 5 cm, T30 Cross beams in hot dip galvanized Brand new BLT / PR45 FVZ manufactured in Europe & tested according to current standard DIN EN 15512. 100% quality at the best price. Shelf consists of : 04 x upright approx. 450 cm x 110 cm, pre-assembled. 12 x crossbar approx. 270 x 14 x 5 cm, T30. 24 x locking pins. 24 x locking screw M8 x 20 incl. nut. Levels: Floor + 2 27 pallet spaces incl. floor spaces. -- IMMEDIATELY MULTIPLE AVAILABLE-- Price : 1900 € net plus legally valid VAT. You will receive an invoice with VAT. Delivery on request by us possible. Rd7b2 Our recommendation : Let us know your needs... We will be happy to help you with the realization of your projects, from planning to ordering and installation. Customer Note : When mounting the locking pins / locking screws may have to be re-drilled holes glued by the hot-dip galvanizing. This can not be excluded with a high quality hot-dip galvanizing. If you have any questions, please contact us.

Condition: new, PALLET RACKS GALVANIZED FOR OUTDOOR USE SPECIFICATIONS : H : ca. 450 cm D : ca. 110 cm L : approx. 19,60 running meter load : 3000 kg shelf load Stands in hot-dip galvanized crossbars 270 x 14 x 5 cm, T30 Crossbars in hot-dip galvanized Brand new BLT / PR45 FVZ manufactured in Europe & tested according to current standard DIN EN 15512. 100% quality at the best price. Shelf consists of : 08 x upright approx 450 cm x 110 cm, pre-assembled. 28 x crossbar approx. 270 x 14 x 5 cm, T30. 56 x locking pins. 56 x locking screw M8 x 20 incl. nut. Levels: Floor + 2 63 pallet spaces incl. floor spaces. -- IMMEDIATELY MULTIPLE AVAILABLE-- Price : 4100 € net plus legally valid VAT. You will receive an invoice with VAT. Delivery on request by us possible. Our recommendation : P0hjikzt Let us know your needs... We will be happy to help you with the realization of your projects, from planning to ordering and installation. Customer Note : When mounting the locking pins / locking screws may have to be re-drilled holes glued by the hot-dip galvanizing. This can not be excluded with a high quality hot-dip galvanizing. If you have any questions, please contact us.

Condition: good (used), Pallet racks Shelving SSI Schaefer PR600 39,0 lfm H: 740 cm Used ex STOCK Heavy duty racks Data : H : ca. 740 cm D : approx. 105 cm L : approx. 39 rm Soen7 Load : 2400 kg shelf load Load: 7200 kg field load with shelf height max. 150 cm . Stands in galvanized Crossbars in blue Frame preassembled Used goods ex warehouse Wietmarschen. Shelf consists of : 11 x uprights approx. 740 cm x 105 cm, pre-assembled. 60 x crossbar approx. 380 cm x 14 cm x 5 cm (TRV1-380-145-30CE). 120 x safety pins. Levels: Floor + 3 160 pallet spaces Price : 5990,00 € net plus legally valid value added tax. You will receive an invoice with VAT.