Used Valla 400 E for sale (78,524)

Condition: ready for operation (used), Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible. Gtedpfoxhntlsx Afaju

Condition: ready for operation (used), HUGO BECK horizontal flow wrapper type FLEXO 400 S, pass-through width: 55-400mm, pass-through height: 2-150mm, product length: from 80mm to unlimited, film roll width: 550mm half tube, roll diameter: 350mm, working height: 850mm +/- 50mm adjustable. Machine dimensions: approx. X/Y 2000mm/1450mm. Inspection possible by appointment. Gtedext Rk Ropfx Afaeu

Condition: ready for operation (used), Year of construction: 1993, An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible. Gsdjuml S Njpfx Afajtu

Condition: new, Year of construction: 2026, RLA 400 VIBER Power 11300 m3 Capacity ~ 11,300 m3/h Motor power 11 kW / 15 HP Rotation speed 3000 rpm Suction speed 32 m/s Gtsdpfxslkd Tfe Afasu Diameter of the extraction spigot 355 mm Polyester filter material Filter permeability 5 microns Filter size 160 x 935 mm Number of filters 58 Chip container size 500 x 500 x 600 mm - 3 pieces Voltage 380V Dimensions 1000 x 3000 x 2300 mm Weight 630 kg Sound level 85 dB unconnected / 70 dB connected + 850 euros for the models with fire extinguisher (Safe System) + 1350 euros for the models with inverter (speed control)

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Gtsdsyigtlepfx Afaou Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Condition: new, pressure: 400bending length: 4050column width: 3550daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 5000x2770x3560weight approx.: 23.9504 axes (Y1, Y2, X, R): Ja alle Achsen über die Steuerung Esa S640 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S640 (2D Grafik Steuerung)motor power: 45Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Goded Ehiaepfx Afaotu

Condition: new, pressure: 400bending length: 6050column width: 5100daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 6855x2780x3615weight approx.: 31.4004 axes (Y1, Y2, X, R): Ja alle Achsen über die Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S630 (2D Grafik Steuerung)motor power: 45Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Gtedjd Ehh Sjpfx Afaju

Condition: new, functionality: fully functional, Aging brush machine Sarmax CHEYENNE SP2 400 working width 400 mm maximum working height 300 mm conveyor belt with adjustable speed 3–15 m/min includes steel brush and tynex brush Total power 7 kW technical documentation CE certificate Brand new machine available on order Gtsdjyf Av Rjpfx Afaou

Condition: good (used), mileage: 945,652 km, power: 291 kW (395.65 HP), first registration: 02/2014, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, parking air conditioner, power mirror, spoiler, General information Model code: ### Cab: Space Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.354 kg Carrying capacity: 12.146 kg GVW: 19.500 kg Interior Interior: grey Number of seats: 2 History Number of owners: 1 Godpfxeyg R Hme Afaetu Condition Technical condition: good Visual appearance: good Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, mileage: 518,000 km, emission class: euro5, Year of construction: 2008, Year of construction: 2008 Godpfx Ajx Dl T Uofajtu

Condition: used, diameter 400 mm boring diameter / mm - / SMW-AUTOBLOK power chuck HFK 400 Gtodpfxeidrkfs Afaeu Diameter: 400mm Inner diameter: 100mm n-max: 2300 rpm Chuck width: 140mm Tube length: approx. 890mm Weight: 130kg max. operating force: 10000 daN

Condition: excellent (used), Year of construction: 2012, operating hours: 46,000 h, For sale: Arburg 470-1500-400 injection moulding machine, year ... In very good technical and visual condition, operates very quietly with no oil leaks. Selogic control. Bimetallic injection unit, diameter 40 mm. 1x air, 2x hydraulic core, robot interface. Godpfx Aeukirbofaotu

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 350 m²/h, overall weight: 37 kg, warranty duration: 12 months, input voltage: 230 V, VICTOR SPRITE 400 STANDARD SPEED SINGLE DISC SCRUBBER The 400mm cleaning head is equipped with a new, medium-hard disc brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Working width (mm): 400 Rotation speed (rpm/min): 240 Capacity (m²/h): 350 Brush/pad pressure (kg): 27.4 Rated power (W): 1100 Weight (kg): 37 Dimensions (L x W x H - mm): 650x440x1100 INCLUDED: NEW 400mm PPL 0.5 disc brush 5 liters of TENZI NORMAL cleaning fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. Gtsdoykbiaopfx Afaju The large working width (400mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 350 m²/h, overall weight: 37 kg, warranty duration: 12 months, input voltage: 230 V, VICTOR SPRITE 400 HS SINGLE DISC SCRUBBER The 400mm cleaning head is equipped with a new, medium-hard disc brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Working width (mm): 400 Rotation speed (rpm/min): 300 Capacity (m²/h): 350 Brush/pad pressure (kg): 27.4 Gtedpfsykbbvsx Afaju Rated power (W): 1100 Weight (kg): 37 Dimensions (L x W x H - mm): 650x440x1100 INCLUDED: NEW 400mm PPL 0.5 disc brush 5 liters of TENZI NORMAL cleaning fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (400mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 350 m²/h, overall weight: 37 kg, warranty duration: 12 months, input voltage: 230 V, VICTOR SPRITE 400 HS SINGLE DISC SCRUBBER Gsdeyka U Iepfx Afastu The 400mm cleaning head is equipped with a new, medium-hard disc brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Working width (mm): 400 Rotation speed (rpm/min): 300 Capacity (m²/h): 350 Brush/pad pressure (kg): 27.4 Rated power (W): 1100 Weight (kg): 37 Dimensions (L x W x H - mm): 650x440x1100 INCLUDED: NEW 400mm PPL 0.5 disc brush 5 liters of TENZI NORMAL cleaning fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (400mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg Gtodpoya Dh Dsfx Afasu 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Condition: excellent (used), Year of construction: 2015, operating hours: 5,000 h, Equipment: chip conveyor, documentation/manual, The Haas EC-400, designed for large-scale production and unmanned operation, is in excellent condition Year of manufacture 2015 Operating hours 4550:55:55 Has been in the same place for 10 years! Machine equipment: 2APC - Automatic pallet changer, pallet 400x400mm 12K - 12,000 rpm high-performance spindle VDRIVE - Vector Drive spindle drive with 22.4 kW drive power SMTCH40 - Side tool changer 40+1 stations. SK-40 BS - Separate tool loading station 4AX - Full 4th axis 0.00 1 ° programmable WIPS - Renishaw tool and workpiece measurement TSC - Internal cooling through the spindle 20 bar AF - Fine filter system 25 µ for internal cooling PCOOL - Programmable additional coolant nozzle CONVEYOR-H - Chip disposal system worm with hinge belt conveyor RTAP - Thread cutting without compensating chuck KEY - Key switch for program lock LCD15 - 15 inch LCD monitor with USB interface Machine can be viewed under tension in Upper Austria by arrangement. The buyer takes care of transport. Gtjdpfx Afovzlttsaju Technical data, accessories and description of the machine are non-binding

Condition: good (used), Year of construction: 2013, CNC MATRIX 2 , Maximum diameter 658 mm, travel X 615 mm, travel Z 1585 mm, travel Y 250 mm, bar passage 102 mm bore 112, spindle speed 35 to 2200 rpm, milling spindle 35 to 12000 rpm, 5 simultaneous axes, mm, 36 tool magazine Capto C6, RENISHAW preparation, steady rest support, chip conveyor. Gtodpouqkttefx Afasu

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, overall weight: 37 kg, warranty duration: 12 months, input voltage: 230 V, VICTOR SPRITE 400 HS SINGLE DISC SCRUBBER The 400mm cleaning head is equipped with a new, medium-hard disc brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Working width (mm): 400 Rotation speed (rpm/min): 300 Capacity (m²/h): 350 Brush/pad pressure (kg): 27.4 Gjdpfx Afoyi En Doastu Rated power (W): 1100 Weight (kg): 37 Dimensions (L x W x H - mm): 650x440x1100 INCLUDED: NEW 400mm PPL 0.5 disc brush 5 liters of TENZI NORMAL cleaning fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (400mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, overall weight: 37 kg, warranty duration: 12 months, VICTOR SPRITE 400 HS SINGLE DISC SCRUBBER The 400mm cleaning head is equipped with a new, medium-hard disc brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. Gtodjyi Ehwjpfx Afaju TECHNICAL DATA: Working width (mm): 400 Rotation speed (rpm/min): 300 Capacity (m²/h): 350 Brush/pad pressure (kg): 27.4 Rated power (W): 1100 Weight (kg): 37 Dimensions (L x W x H - mm): 650x440x1100 INCLUDED: NEW 400mm PPL 0.5 disc brush 5 liters of TENZI NORMAL cleaning fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (400mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, overall weight: 37 kg, warranty duration: 12 months, input voltage: 230 V, VICTOR SPRITE 400 HS SINGLE DISC SCRUBBER The 400mm cleaning head is equipped with a new, medium-hard disc brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Working width (mm): 400 Rotation speed (rpm/min): 300 Capacity (m²/h): 350 Brush/pad pressure (kg): 27.4 Rated power (W): 1100 Weight (kg): 37 Dimensions (L x W x H - mm): 650x440x1100 INCLUDED: NEW 400mm PPL 0.5 disc brush 5 liters of TENZI NORMAL cleaning fluid - FREE Gtodpoyi Edxjfx Afaju KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (400mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: new, Year of construction: 2024, functionality: fully functional, Powerful and versatile panel saw packed with extra features Sliding table with 10-year warranty! - Anodized aluminum sliding table, running on hardened steel guides. - Crosscut frame complete with mobile aluminum fence for fast, precise positioning for angle cuts. - Extended outfeed table - Emergency stop push button on the front of the machine and on the side of the parallel fence. - Overload relay Gtsdpeyglr Dofx Afaeu - Overhead saw guard with integrated dust extraction Ø 80 mm - Automatic brake on the main blade - Lockable main switch for the control circuit (110 V) - Manual right-hand side guide with position reading via metric scale, running on Ø 40 mm steel tube, and with micrometric adjustment. - Cutting capacity against parallel fence 1270 mm. Direct start of main motor - Three speeds for main blade - Scoring unit with independent motor and external setup and stop for quick repositioning of the scoring blade. The machine is compliant with CE standards. Additional features: - CompeX for angle cuts, integrated into the extension table, for quick conversion to angled cutting - Start/Stop switch on the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops - 3rd LCD stop for crosscut fence

Condition: new, Year of construction: 2024, functionality: fully functional, SCM Panel Saw, SI 400 EP NOVA with tilting blade and sliding table - “READY” electronic control with 2 controlled axes Specification: - Lifting and tilting of the saw unit - Automatic height adjustment according to tilt angle - Manual, semi-automatic, and automatic with memory - Up to 99 programs - Calculator and hour meter - Tool data setting Optional equipment: - CompeX for mitre cuts, integrated in the sliding table for quick changeover to mitre cuts - Start/Stop switch at the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops Godpfx Asygll Rofastu - 3rd LCD stop for crosscut fence

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Gtedpfxsvvi N Ie Afaeu

Condition: used, mileage: 105,000 km, power: 110 kW (149.56 HP), first registration: 03/2018, fuel type: diesel, overall weight: 3,500 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Ref-No.: 231 Gtodpfx Aeyhkcdjfaju Very well-maintained NISSAN with KAISER body * NISSAN NT 400 * 4x2 wheel configuration * GVW 3,500 kg * Leaf spring suspension (front/rear) * Manual transmission * 3-seater cab * KAISER suction/pressure combination jetter * Dietmar Kaiser Defco Combi * Vacuum pump 324 m³/h * High-pressure pump 100 l/min 150 bar * Tank capacity 765 L + 660 L * Remote control for body * Differential lock * Radio * Tow hitch, 3,500 kg * Very good condition * VAT deductible * Net price: €52,900 Trade-in possible Financing available from 4.99% Errors and prior sale excepted! The details in this advertisement are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability for possible typographical or data transmission errors. Listed features must be checked separately. All details in the advertisements are non-binding! Nationwide delivery available on request Opening hours: Monday to Thursday 9:00-17:00 Friday 9:00-14:00 and by appointment!