Used Hyundai Hdf 70-7S for sale (149)

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, load capacity: 7,000 kg, lifting height: 4,500 mm, Equipment: cabin, Internal combustion forklift Machine brand: HYUNDAI Designation: HDF 70 Year of manufacture: 2005 Meter reading (h): 18,430 Own weight (kg): 10,101 Load capacity (kg): 7,000 Lift height (mm): 4,500 Dkodpfsv Edvbex Aa Iji Fork length (mm): 2,400 mm Side shift fork, fork positioner STABAU from 2018 Fuel type: DIESEL Technical documentation for UDT Technical condition: used, very good .

Condition: like new (used), functionality: fully functional, power: 242 kW (329.03 HP), gearing type: automatic, fuel type: diesel, color: yellow, operation weight: 24,200 kg, tire condition: 90 %, shovel volume: 4.2 m³, Year of construction: 2024, operating hours: 505 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, low noise, Hyundai HL970A Year of manufacture: 2024 Operating hours: approx. 505 Cyclone pre-air filter Cab air compressor Standard brake accumulator Safety boom lock Remote-controlled door 4 front LED cabin lights Voltage converter 24V LED beacon 360° surround view monitor (AAVM) Radar LED driving lights LED combination lights Second monitor Single brake pedal Dkedpfjyr Scyjx Aa Isi Piping for 3rd hydraulic circuit Bekamax central lubrication system Piping for quick coupler Joystick steering Standard lifting frame With emergency steering Ride control 5-speed transmission (torque converter) Quick coupler ISO SW (Volvo mount) Triangle TB5 radial tires Transmission underguard Control valve block (MCV) with 3 sections Air-suspended, heated seat Hydraulic oil - VG46 Accelerator pedal with ECO switch Without Bmair filter system Standard paint finish Fingertip 3-slider, electric Rear window roller blind Wheel chock Axle cooling - front & rear Hydraulic differential Rear axle without differential lock Universal bucket 4.2 m³, bolt-on cutting edge Standard bucket 4.6 m³ with teeth available at extra cost

Condition: used, Year of construction: 2016, operating hours: 11,448 h, Equipment: ABS, all wheel drive, Hyundai HL 970 XT - Central lubrication system - LED work lights - Rear-view camera - Joystick steering - Air-suspended driver's seat - Rear-view camera - Heated mirrors Errors and prior sale excepted. Dksdpfsv A Enyjx Aa Iji Internal vehicle number: 10672. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us via WhatsApp.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, turning length: 3,250 mm, turning diameter: 920 mm, spindle bore: 165 mm, HYUNDAI WIA KL 7000 LY Made in 2025. CE - NO CONTROL PANEL – FANUCK 32I- MODEL B PLUS The machine has a high pressure coolant of 70 BAR automatic SMW Germany made. Chuck diameter: 610 mm Max. Machining diameter: 920 mm Max. Machining length: 3250 mm Diameter above the bed: 1200 mm Max Bar diameter: 165 mm X/y/z / fast feed speed: 12/10/12 / m/min Number of places for tools: 12 Power of the driving tool: 11/7. 5 kw +Located In Israel . Djdpfx Aaoyighco Ieki +Atractive price

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Dsdpfx Aaoyrrkwo Iski Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel met spaantransportband Djdpfxexadmro Aa Ieki met Kitagawa 4e as Table dimensions: 1200 x 500 mm Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Toolchanger: yes Number of toolholders: 30 positions

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, FOR SALE Hyundai HIT 18S CNC Lathe This 2-axis model (X + Z) is designed for machining medium-sized parts, offering high precision and reliable CNC control. Main technical specifications Machining capabilities - Maximum turning diameter: approx. 254 mm - Maximum turning length: approx. 500 mm - Swing over bed: approx. 440 mm Axis travel - X axis (cross travel): approx. 180 mm - Z axis (longitudinal travel): approx. 510 mm - Note: 2-axis CNC (X + Z) — no native C-axis on this model. CNC control - System: Siemens 840C or HiTrol variant (840C), depending on configuration. Spindle and tooling - Max. spindle speed: approx. 3600 rpm - Spindle motor power: approx. 15 kW - Turret: 1 turret with 8 tool stations - Chuck: 3-jaw standard with through-hole clamping Accessories and options - Chip conveyor: generally included - Automatic tool presetting: often included Dkjdpoydp Drofx Aa Iei - Tailstock / bar feeder: generally not included Dimensions and weight - Dimensions (L × W × H): approx. 2600 × 1650 × 1830 mm - Weight: approx. 4300 kg Best regards,

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, FOR SALE Hyundai HiT 30M CNC Lathe — Technical Overview 3 AXIS Dkedpfx Aaeydp E Ne Iei Brand: Hyundai (Hyundai WIA) Model: HiT‑30M Machine: CNC Lathe (Turning Center)

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 520 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 480 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, spindle speed (max.): 24,000 rpm, spindle motor power: 10,500 W, tool weight: 2,800 g, number of axes: 3, This 3s Hyundai Wia I-cut 380MD vertical machining centre was manufactured in 2012. It features a maximum spindle speed of 24,000 rpm and a spindle power of 10.5 kW, providing efficient machining capabilities. The working area includes a 520 mm X-axis and a 480 mm Z-axis, making it suitable for various applications. Consider the opportunity to buy this Hyundai Wia I-cut 380MD vertical machining centre. Contact us for further details. • Table size: 2 × 650 × 400 mm Dkodpfx Aeyk Em Nja Iji • Spindle taper: BBT30 • Rapid traverse (X/Y/Z): 56 m/min • Tool magazine: 20 tools (BBT30) • Maximum tool length: 200 mm • Maximum tool diameter: 65 mm • Through-spindle coolant: 20 bar • Prepared for connection of rotary axes on both tables • Condition: Machine is connected and fully operational; inspection and testing possible at any time Additional equipment • Chip conveyor included

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,000 rpm, travel distance X-axis: 355 mm, travel distance Z-axis: 750 mm, spindle motor power: 26,000 W, total height: 1,997 mm, overall weight: 6,400 kg, controller manufacturer: FANUC, controller model: i Series – Smart Plus, product length (max.): 3,506 mm, number of axes: 2, This Hyundai Wia L300C was manufactured in 2025. It features a swing over the bed of Ø750 mm, a maximum turning diameter of Ø500 mm, and a turning length of 720 mm. The spindle supports a bar capacity of Ø90 mm and operates at speeds up to 3000 rpm. Ideal for precision turning with its robust 12-tool turret and rapid traverse rates. Consider the opportunity to buy this Hyundai Wia L300C horizontal turning machine. Contact us for more information. • Condition: Original packaging, 0 operating hours • Capacity: • Swing over bed: Ø750 mm • Swing over carriage: Ø480 mm • Max. turning diameter: Ø500 mm • Max. turning length: 720 mm • Bar capacity (main): Ø90 mm • Bar capacity (sub): Ø102 mm • Chuck size (main): 12" • Chuck size (sub): – • Spindle (main): • Spindle bore: Ø102 mm • Torque (max/cont.): 1,131/957 Nm (834.2/705.8 lbf·ft) • Spindle type: Belt + 2-step gear • Spindle nose: A2-8 (A2-11) • Feed: • Travel (X/Z): 355/750 mm • Rapid traverse rate (X/Z): 20/24 m/min • Slide type: Box guide • Turret: • Number of tools: 12 • Tool size (OD): Ø25 mm Dkodpfx Aoycwlnja Iji • Tool size (ID): Ø50 mm • Indexing time: 0.3 sec • Tank capacity: • Coolant tank: 220 l • Lubricating tank: 1.8 l • Power supply: • Electric power supply: 30 kVA • Thickness of power cable: Over 35 mm² • Voltage: 220/60 (200/50)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 23,000 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 560 mm, number of axes: 2, This Hyundai Wia L230LA was manufactured in 2018. It features X-axis travel of 220 mm, Z-axis travel of 560 mm, a swing over the bed of 600 mm, and a swing over the carriage of 355 mm. Spindle speed reaches up to 4000 RPM. Two units available. Contact us for more information. Dedpfsyf Hqrjx Aa Ieki • Swing over bed: 600 mm • Swing over carriage: 355 mm • Availability: 2 machines Additional equipment • Chip conveyor: not included • Other accessories: not specified

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, total height: 1,755 mm, overall weight: 5,800 kg, controller manufacturer: FANUC, controller model: Series, product length (max.): 3,400 mm, number of axes: 2, This Hyundai Wia HD 2600 horizontal turning machine was manufactured in 2025. It features a swing over the bed of 630 mm, a maximum turning diameter of 460 mm, and a bar capacity of 80 mm. The spindle supports a speed of 3,500 rpm with a motor power of 26/18.5 kW. It also includes a 10-tool turret and a rapid traverse rate of 24/30 m/min. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia HD 2600 machine we have for sale. Contact us for more information. • Original packaging Capacity • Swing over the bed: 630 mm • Swing over the carriage: 460 mm • Max. turning diameter: 460 mm • Max. turning length: 659 mm • Bar capacity: 80 mm • Chuck size: 10" Spindle • Spindle bore: Ø91 mm • Motor (max/cont.): 26/18.5 kW (35/25 HP) • Torque (max/cont.): 734/522 Nm (541/385 lbf·ft) • Torque (additional value stated): (828/748 Nm) • Spindle type: Belt • Spindle nose: A2-8 • C-axis indexing: 0.001° Feed • Rapid traverse rate (X/Z): 24 / 30 m/min (945 / 1,181 ipm) • Slide type: Box guide Turret / Tooling • No. of tools: 10 (12) • Tool size (OD): 25 mm • Tool size (ID): Ø50 mm • Indexing time: 0.15 sec Tailstock • Type: MT#5 (Built-in tail stock - MT#4) • Quill diameter: Ø100 mm • Quill travel: 120 mm • Travel: 680 mm Tank Capacity • Coolant tank: 180 L (47.6 gal) • Lubricating tank: 18 L (4.75 gal) Power Supply • Electric power supply: 27 kVA Dksdpfx Ajycvwcsa Ioi • Thickness of power cable: Over 16 mm² • Voltage: 220/60 (200/50)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 57,600 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, number of axes: 2, This Hyundai Wia L210LA was manufactured in 2013. It features a spindle speed of 4000 rpm, X travel of 210mm, Z travel of 550mm, a maximum turning diameter of 350mm, and a maximum turning length of 530mm. It includes a chip conveyor. Consider the opportunity to buy this Hyundai Wia L210LA horizontal turning machine. Contact us for more information. • Max. turning diameter: 350 mm • Max. turning length: 530 mm Dkedoyffptjpfx Aa Ioi • Quantity available: 2 Additional equipment • Chip conveyor

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,900 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, table load: 800 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hyundai WIA F500 + was manufactured in 2019. It features a Siemens SINUMERIK 828D control unit, a spindle speed of up to 8,000 rpm, and a spindle motor power of 15/11 kW. The machine includes a CNC vertical machining center, chip conveyor, automatic tool changer, and internal cooling system. If you are looking to get high-quality milling capabilities, consider the Hyundai WIA F500 + machine we have for sale. Contact us for more information. • Coolant: internal cooling; through-spindle coolant (TSC) • Automatic tool changer: Yes • Hours: working hours approx. 2,900 h; cutting time 2,917 h; power-on time approx. 7,000 h • Status: machine under power; available for testing Additional equipment Dodpfjx D Nb Nsx Aa Iski • Chip conveyor • Workholding on table: precision vise and chuck (as shown)

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, total height: 1,700 mm, overall weight: 3,550 kg, controller manufacturer: FANUC, controller model: i – SMART PLUS, product length (max.): 2,970 mm, number of axes: 3, This Hyundai WIA SE 2200 LM was manufactured in 2025. It features a maximum turning diameter of Ø300 mm and a length of 529 mm, with a spindle speed of up to 6,000 rpm. The machine includes a 12-tool turret and supports milling with a tool speed also up to 6,000 rpm. Ideal for precision turning and milling tasks. Contact us for more information about this machine. • Condition: Original packaging, 0 operating hours • Capacity • Max. swing: Ø600 mm • Swing over the carriage: Ø390 mm • Max. turning diameter: Ø300 mm • Max. turning length: 529 mm • Bar capacity (main): Ø32 mm • Chuck size (main): 5 • Spindle (Main) • Spindle bore: Ø42 mm • Motor (max/cont.): 7.5/3.7 kW (10/5 HP) • Torque (max/cont.): 63.6/23.6 Nm (46.9/17.4 lbf·ft) • Spindle nose: A2-5 • Spindle type: Flat type • C-axis indexing: 0.001° • Feed • Rapid traverse rate (X/Z): 15 m/min • Slide type: Roller LM guide • Turret • Number of tools: 12 (24) • Tool size (OD/ID): Ø20/Ø32 mm • Indexing time: 0.15 sec Djdpfx Aeycv Egsa Iski • Live tool • Milling tool speed: 6,000 rpm • Motor (max/cont.): 3.9/2.6 kW (5/3.5 HP) • Torque (max/cont.): 36.7/18.5 Nm (27.1/13.6 lbf·ft) • Collet size: ER20 (Ø13 (0.5")) • Type: BMT45 • Tailstock • Taper: MT#4 • Quill diameter: Ø55 mm • Travel: 580 mm • Tank capacity • Coolant tank: 200 l • Lubricating tank: 0.7 l • Power supply • Electric power: 23 kVA • Power cable thickness: Over 16 mm² • Voltage/frequency: 220 V, 50/60 Hz

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: FANUC, controller model: 21‑i TB, This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information. Machine Benefits Dksdsyaln Ejpfx Aa Ioi Technical Machine Benefits • Number of axes: 4 (x, z, c, b) /x axis travel: 221 mm /z axis travel: 549 mm • Max. Machining diameter: Ø 254 mm/ max. Machining length: 531 mm • Tool magazine: 12 positions • Equipment: chip conveyor /bar feeder: top automazioni mod. Magic

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 100 mm, total height: 2,080 mm, overall weight: 8,500 kg, product length (max.): 3,650 mm, number of axes: 4, This 4-axis Hyundai WIA LM 1800 TTSY was manufactured in 2025, featuring a maximum turning diameter of Ø230 mm and length of 673 mm. It boasts a spindle speed of up to 5,000 rpm and a bar capacity of Ø65 mm. The machine includes a built-in motor spindle, dual 12-tool turrets, and rapid traverse rates ensuring efficient operations. Ideal for complex turning tasks. Contact us for more information about this machine. • Packaging: Original packaging • Capacity: • Swing over carriage: Ø290 mm • Max. turning diameter: Ø230 mm • Max. turning length: 673 mm • Bar capacity (1st/2nd): Ø65 mm • Chuck size (1st/2nd): Ø210 mm • Spindle: • Spindle bore (1st/2nd): Ø76 mm Djdpfjycvzbex Aa Ioki • Motor (Max/Cont.) (1st/2nd): 22/11 kW (30/15 HP) • Torque (Max/Cont.) (1st/2nd): 358/214 Nm (264/158 lbf ft) • Spindle type: Built-in motor • Spindle nose: A2-6 • C-axis indexing (1st/2nd): 0.001° • Feed / Axes: • Travels (X1/X2): 165/195 mm • Travels (Z1/Z2): 700/720 mm • Travel (ZB): 668 mm • Rapid (X1/X2): 20/20 m/min (787/787 ipm) • Rapid (Z1/Z2): 40/40 m/min (1,575/1,575 ipm) • Rapid (Y): 7.5 m/min (295 ipm) • Rapid (ZB): 40 m/min (1,575 ipm) • Slide type (X/Y): Box guide • Slide type (Z): LM guide • Turret: • No. of tools: 2 × 12 (24) • Tool size (OD): Ø20 mm • Tool size (ID): Ø32 mm • Indexing time: 0.15 sec • Y-axis type: Wedge type • Live tool: • Milling tool speed: 5,000 rpm • Motor (Max/Cont.): 5.5/1.1 kW (7.4/1.5 HP) • Torque (Max/Cont.): 47/14 Nm (34/10 lbf ft) • Collet size: ER25 • Type: BMT55 • Tank capacity: • Coolant tank: 300 L (79.3 gal) • Lubricating tank: 4 L (1.06 gal) • Power supply: • Electric power: 60 kVA • Power cable thickness: Over 50 mm² • Voltage: 220/60 (200/50) • NC / Controller: FANUC 31i-B Plus / SIEMENS 840D

Condition: ready for operation (used), Year of construction: 2021, operating hours: 280 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, controller manufacturer: FANUC, number of axes: 4, This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Additional equipment • USB interface • Three-colour signal light • 1 set of soft jaws • CHIP CONVEYOR HS with lateral ejection • Transformer incl. cable • Manual compressed air gun • Bar feeder interface // Bar loader interface • Parts catcher main spindle • Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt • Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm Machine Benefits Technical Machine Benefits • Linear (z) and flat-guided (x/y) 45 degree • Turning Ø: 230 mm // turning length: 673 mm • Chuck size both spindles: 8 inch (~210 mm) • Turret c-axis, 0. 001° // turret y-axis, +- 50 mm - upper turret • Driven tools: 5000 rpm, 5. 5 kw • 1 x axially driven tools // 1 x radial driven tools • Automatic tool probe • Coolant tank 270 litres // standard coolant nozzle • Internal cooling 30 bar • 30 bar coolant pump (60hz) Extra Information Strongly reduced interference contour Better workpiece accessibility Workpiece stabilization through axial pull against workpiece stop Chuck Type: SPANNTOP mini Chuck Model: Axzug Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 155.00 mm Frontal Diameter: 111.00 mm Maximum Outer Diameter: 165.00 mm Clamping Position: 65.00 mm Clamping Device Thread: M102x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A054288.0009C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M102x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 65.00 mm Maximum Actuation Force: 65.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-HSP Connection [of Pull Tube]: External Thread Thread Designation: M74x1.5 Thread Length: 40.00 mm Front Position Pull Tube: 57.50 mm Stroke of Clamping Cylinder: 17.50 mm Spindle Bore Diameter: 76.00 mm Pull Tube Inner Diameter: 66.00 mm SPANNTOP mini Axfix 65 KK6 Chuck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 huck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 138.00 mm Frontal Diameter: 119.00 mm Maximum Outer Diameter: 167.00 mm Dkjdsx D Itdepfx Aa Iei Clamping Position: 50.00 mm Clamping Device Thread: M94x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A071618.0004C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M94x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 50.00 mm Maximum Actuation Force: 45.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-GSP

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,500 rpm, travel distance X-axis: 680 mm, travel distance Y-axis: 95 mm, travel distance Z-axis: 680 mm, spindle motor power: 18,500 W, total height: 1,950 mm, overall weight: 4,800 kg, product length (max.): 3,380 mm, number of axes: 3, This 3-axis Hyundai Wia HD2600Y horizontal turning machine was manufactured in 2025. It features a swing over the bed of Ø820 mm, a maximum turning diameter of Ø300 mm, and a turning length of 610 mm. The spindle supports up to 3,500 rpm with a motor power of 18.5 kW. It includes a 12-tool turret and a milling tool speed of 6,000 rpm. Consider the opportunity to buy this Hyundai Wia HD2600Y horizontal turning machine. Contact us for more information. • Condition • Original packaging • 0 operating hours Capacity • Swing over bed: Ø820 mm • Swing over carriage: Ø650 mm • Max. turning diameter: Ø300 mm • Max. turning length: 610 mm • Bar capacity (sub): Ø81 mm • Chuck size (main): 10" Spindle • Spindle bore (main): Ø91 mm • Motor (max/cont.) (main): 18.5/15 kW (25/20 HP) • Motor (max/cont.) (sub): 5.5/3.7 kW (7.4/5 HP) • Torque (max/cont.) (main): 400.7/243.7 Nm (295.7/179.9 lbf·ft) • Torque (max/cont.) (sub): 46.6/25.3 Nm (34.4/17.7 lbf·ft) • Spindle type: Belt • Spindle nose (main): A2-8 • Spindle nose (sub): Ø110 mm • C-axis indexing: 0.001° Feed • Travel (Z/2B): 680 / 680 mm • Rapid traverse (X/Y): 30 m/min • Rapid traverse (Z/2B): 24 / 24 m/min • Slide type: Box guide Turret • No. of tools: 12 (24) • Tool size (OD): Ø25 mm • Tool size (ID): Ø40 mm • Indexing time: 0.2 sec • Y-axis type: Wedge type Live tool • Milling tool speed: 6,000 rpm • Motor (max/cont.): 5.5/3.7 kW • Torque (max/cont.): 52.6/25.6 Nm • Collet size: Ø16 mm (ER25) • Type: BMT55 Tailstock • Taper: MT#4 • Quill diameter: Ø80 mm • Quill travel: 120 mm • Travel: 680 mm Tank capacity • Coolant tank: 200 l • Lubricating tank: 2 l Power supply Dkjdpfjycwlzsx Aa Iji • Electric power supply: 27 kVA • Thickness of power cable: Over 25 mm² • Voltage: 220/60 (200/50) CNC • Controller: HYUNDAI WIA FANUC i-Series – Smart Plus / SIEMENS 828D

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 3,000 rpm, total height: 1,997 mm, overall weight: 7,800 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, This HYUNDAI WIA L300 LMC Lathe was made in 2019. It is equipped with a Siemens Sinumerik 828D control unit. The machine has a spindle speed of 3000 rpm. Machine Benefits Technical Machine Benefits • Max swing over bed: 750 mm • Swing over carriage: 480 mm Dkedsyi Elcjpfx Aa Isi • Max turning diameter: 500 mm • Max turning lenght: 1260 mm • Sub spindle: 4000 rpm • C axis indexing: 0. 001º • X, z and b axis • Turret with 12 live tool position • Mt5 tailstock Dimensions Machine Depth 2002 mm

Condition: excellent (used), functionality: fully functional, power: 203 kW (276.00 HP), overall weight: 20,100 kg, axle configuration: 4x4, number of seats: 1, Year of construction: 2019, operating hours: 14,695 h, Equipment: air conditioning, all wheel drive, cabin, centralized greasing system, differential lock, hydraulics, quick-change device, trailer coupling, Hyundai HL965/HySW/40 km/h/Air Conditioning/CSA • Manufacturer: Hyundai • Model: HL965 • Year of manufacture: 2019 • Operating hours: 14,695 h • Engine model: Cummins QSL9 • Power: 203 kW / 276 hp • All-wheel drive • Differential lock • ROPS/FOPS certified • Rear-view camera • 360° camera • Air-suspended driver's seat • Multifunction display • ESC (Electronic Stability Control) • Air conditioning • Window ventilation • Central lubrication system • High- and low-speed range • Max. travel speed: 40 km/h • Radio • Total weight: 20,100 kg • German machine Dkedpfxjyq Rt Is Aa Iji • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typographical mistakes excepted. - Sale is according to our General Terms and Conditions.

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Spindle speed 4,500 rpm Dsdpfxoyp Idus Aa Iski 8-position turret Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements width 2349 mm Measurements depth 1640 mm Measurements height 2600 mm Machine weight 2300 kg Movement X-Axis Movement 500 Y-Axis Movement 300 Z-Axis Movement 300 Dkodpfsx D Nfbox Aa Isi This 3-axis Hyundai SPT-V30TD was manufactured in 2001. It features a spindle speed of 8,000 rpm, table dimensions of 600 x 380 mm, and a maximum table load of 200 kg. Ideal for milling applications, it offers X, Y, and Z travels of 500 mm, 300 mm, and 300 mm respectively. Consider the opportunity to buy this Hyundai SPT-V30TD vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, Main Drive Spindle speed range 15000 Dkodpfxsx D I Ins Aa Iji Number of axis 3 This 3-axis Hyundai WIA KF 5600 vertical machining center was manufactured in 2018. It features a 30-position automatic tool changer, a high-speed spindle at 15,000 rpm with BBT40 taper, and advanced Siemens software options including 3D simulation and real-time machining recording. Ideal for precision machining with its equipped glass rods for accurate measurements. Consider the opportunity to buy this Hyundai WIA KF 5600 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, overall weight: 2,000 kg, spindle speed (max.): 6,000 rpm, machine/vehicle number: 14736259, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS X-axis travel: approx. 100 mm Z-axis travel: approx. 200 mm Spindle speed: up to 6,000 rpm MACHINE DETAILS Operating voltage: 380 V Frequency: 50/60 Hz Rated current: 24 A Connection load: 25.5 kVA Dimensions & Weight Dkjdpfoym N Agsx Aa Isi Dimensions (L x W x H): 1,800 x 1,500 x 2,100 mm Weight: 2,000 kg External reference: Elos - Lot 17