Used Hyundai 50 D-7E for sale (166)

Year of construction: 2010, operating hours: 5,356 h, condition: used, empty load weight: 4,763 kg, lifting height: 6,000 mm, free lift: 1,880 mm, mast type: triplex, construction height: 2,690 mm, fork length: 1,200 mm, drive type: Diesel, load capacity: 3,000 kg, machine/vehicle number: HHIHHn04TA0000725, Diesel forklift truck Chassis number: HHIHHn04TA0000725 Ndedsu D Tqvepfx Agied Load center: 500mm Mast type: Triplex Technical condition: very good Front tires type: Superelastic Rear tires type: Superelastic Description: Incl. new UVV & ASU. Price plus VAT. Subject to prior sale. (Pictures only show an identical device) Load protection grille, sideshift, front working lights,

Condition: used, Year of construction: 2012, operating hours: 3,100 h, mast type: duplex, color: other, Forklift 7 tons (7200 kg) – Sideshift – 3,100 operating hours – Diesel = Additional Information = Year of manufacture: 2012 Condition: No damage Ndedjwwkwnspfx Agiod Reference number: 17 Please contact Miguel Cubas for further information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, functionality: fully functional, machine/vehicle number: HHKHB303LF0000830, Year of construction: 2023, operating hours: 150 h, load capacity: 5,000 kg, lifting height: 5,962 mm, free lift: 1,617 mm, fuel type: electric, mast type: triplex, construction height: 2,840 mm, fork carriage width: 1,400 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift truck Nodpfx Aetqg N Tsgiedd Chassis number: HHKHB303LF0000830 Load center: 500 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Technical condition: New Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 700Ah Battery manufacturer: GNB Battery year of construction: 2023 Battery condition: 80 - 100% Sideshift, Fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windshield, load protection grille, impulse control, full free lift, CE certificate,

Condition: new, Year of construction: 2023, Equipment: all wheel drive, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only partially possible. Collection dates must be agreed upon in advance. Hyundai HW 150 ACR Wheeled Excavator - without attachments - Tyres: 10.00-20 Ndjdpfx Agexhblbsisd - Radio - Operating hours: 9 Subject to errors and prior sale. Internal vehicle number: W10 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only partially possible. Collection dates must be agreed upon in advance.

Condition: used, Manufacturer: HYUNDAI Model: KIT 450 Type : CNC Cnc : FANUC 0i- TB Max. Diameter allowed on bed : 530 mm Max. Turning diameter : 170 mm Maximum turning length: 190 mm Bar passage diameter : 45 mm X axis : 450 mm Z axis : 300 mm Spindle speed : 60-6000 rpm Table dimensions : 550 x 2200 mm Nodpfx Agsxr A N Asijdd Number of Slots : 3 Slots diameter : 14 mm

Condition: good (used), Year of construction: 2018, Vehicle description Diesel forklift HYUNDAI 50DA-9 Year 2018 acc. Counter 19.360 hours 5 tons lifting capacity 4.90 meters lifting height 2.48 meters Overall height 75 KW Cummins Euro 5 engine - Triplex free lift mast - 3rd and 4th circle to fork carriage - Cabin with heating (one door) - lighting system - ready for immediate use - Original paint Nedpfx Ager I Adzjisdd - Service maintained machine Selling price: 13.500,-- net also favorable delivery possible!

Condition: used, mileage: 115,000 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 02/2018, emission class: euro6, color: white, number of seats: 3, total length: 5,515 mm, total width: 2,038 mm, total height: 2,685 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, For sale here is a well-maintained Hyundai H350 with the globally popular 2.5-litre diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 6 emissions standard * Single owner * VAT deductible Specification: Panel van L2-H2 * Air conditioning * Cruise control * Navigation system * Rear view camera * Tow bar * Increased towing capacity * Lane keeping assist * Truck registration * On-board computer * Multifunction steering wheel * LED headlights * Driver’s seat heating * Electrically adjustable exterior mirrors * Electric windows * Central locking * 3 seats * and much more... Technical data: Permissible gross weight: 3,500 kg Unladen weight: 2,240 kg Payload: 1,260 kg Towing capacity: 3,000 kg Why choose us? Attractive financing options through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair terms Nodoxw Dvbopfx Agiodd * Transfer plates (5-day/ export registration) usually available on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically clean! Special features: Disinfection of the interior and ventilation system by ozone treatment. 2-stage exterior polish * If necessary, paint correction and smart repair All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters, and any other work, so you don’t have to worry about a thing. Optionally, we can present the vehicle at an independent inspection station or workshop of your choice. We are delighted to have sparked your interest and are at your full disposal around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! For more information and insights into our business philosophy, please visit our website. Special equipment: Overhead storage above driver’s cab, "Deluxe" sound insulation package, electrically adjustable and heated exterior mirrors (both sides), on-board computer with colour display, driver’s package, windscreen with wiper parking heater, rubber floor mats in driver’s cab, load compartment partition wall with window, power socket at driver’s seat, rear step, value package, auxiliary heater Further equipment: Roof lining storage compartment in cab, driver airbag, exterior mirrors with integrated indicators, 100 Ah battery, 105 Ah battery, brake pad wear indicator, driver assistance system: emergency braking assist, windscreen with top band filter, rear wing doors (opening angle 180°), body type: high-roof panel van standard, black radiator grille, height- and reach-adjustable steering column, engine 2.5 l – 125 kW CRDi cat, wheelbase 3,435 mm, tyre repair kit, particulate filter, low emission as per Euro 6 standard, sliding door right side (load/passenger compartment), mud flaps front and rear, height-adjustable driver’s seat, upholstery: fabric/leatherette, passenger double seat in cab, start/stop system, three 12V power sockets in cab, electronic immobiliser, central locking with remote control, permissible gross weight 3.50 t

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,917 h, Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 8000 Number of axis 3 Movement Nsdpoxuaz Iefx Agisdd X-Axis Movement 1060 mm Y-Axis Movement 510 mm Z-Axis Movement 635 mm Table Table load 800 kg Tools Type of tool holder BT40 This 3-axis Hyundai WIA F500 + was manufactured in 2019. It features a Siemens SINUMERIK 828D control unit, a spindle speed of up to 8,000 rpm, and a spindle motor power of 15/11 kW. The machine includes a CNC vertical machining center, chip conveyor, automatic tool changer, and internal cooling system. If you are looking to get high-quality milling capabilities, consider the Hyundai WIA F500 + machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, mileage: 88,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 08/2016, loading space length: 3,000 mm, emission class: euro5, color: white, number of seats: 3, total length: 5,515 mm, total width: 2,038 mm, total height: 2,685 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Attention!!! Preferential sale to commercial customers. Internal ID number: [2947] ----Optional extras available: * 12–64 month warranty (valid throughout the EU) * New inspection * New TÜV (MOT) & emissions test * Nationwide delivery * Financing available, even without down payment ----Vehicle Highlights: Ndedpfx Agexvwy Dsied * 19% VAT deductible * German vehicle * Service history included * Regularly maintained * Accident-free * 2nd owner * High roof + long wheelbase (L2-H2) * Tow bar (3,000 kg) * Automatic climate control * Cruise control * Bluetooth multimedia function * Reversing camera including parking assist * Additional features: Overhead storage in cab, driver’s airbag, exterior mirrors with integrated indicators, 100 Ah battery, 105 Ah battery, onboard computer, brake pad wear indicator, driver assistance system: emergency brake assist, windscreen with top band filter, 130 A alternator, front cupholders, rear wing doors (opening angle 180°), body/variant: high-roof panel van, black radiator grille, load compartment partition without window, height/lumbar adjustable steering column, engine 2.5 L – 110 kW CRDi CAT, radio pre-installation, 2 speakers, wheelbase 3,435 mm, tire repair kit, particulate filter, low emissions (Euro 5 standard), right-side sliding cargo/passenger door, front and rear mud flaps, height-adjustable driver’s seat, seat covers/upholstery: cloth/artificial leather, cab seats: double passenger bench, start/stop system, 3x 12V power sockets in cab, electronic immobilizer, remote central locking, permitted gross vehicle weight 3.50 t ----Leasing or financing required? We offer attractive packages — even with zero down payment! Please feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Note: All information provided online is non-binding and only serves as a general description of the vehicle. Errors, typos, and prior sale excepted. The binding vehicle specifications result solely from the in-person purchase contract or from confirmed written assurances. Vehicles with mileage over 50,000 km or older than 3 years are preferentially sold to commercial customers.

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel met spaantransportband met Kitagawa 4e as Table dimensions: 1200 x 500 mm Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Nodsxadmrjpfx Agisdd Toolchanger: yes Number of toolholders: 30 positions

Condition: used, Year of construction: 2021, operating hours: 1,500 h, load capacity: 5,000 kg, lifting height: 4,652 mm, free lift: 1,428 mm, mast type: triplex, construction height: 2,380 mm, fork length: 1,200 mm, empty load weight: 8,285 kg, total length: 3,040 mm, drive type: Elektro, construction width: 1,424 mm, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Reconditioned with warranty Technical condition: Very good Front tires Type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Ndjdpeu D Trmefx Agijd Battery Volt: 80V Battery Ah: 110Ah Battery manufacturer: Hoppecke Battery type: PzS Battery year of construction: 2021 Battery condition: 80 - 100% Sideshifter, 4th valve,

Condition: used, Year of construction: 2023, operating hours: 619 h, load capacity: 5,000 kg, lifting height: 5,962 mm, free lift: 1,617 mm, fuel type: electric, mast type: triplex, construction height: 2,840 mm, empty load weight: 8,402 kg, total length: 3,040 mm, drive type: Elektro, construction width: 1,424 mm, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Front tire type: Superelastic Front tire size: 28x12.5-15 9.75 Rear tire type: Superelastic Rear tire size: 23x9-10 6.50F Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: IBV Battery year of manufacture: 2023 Fork positioner, Nodpfsvdvrxjx Agiedd Fork positioner Kaup 4.8T410Z Serial no. 891802 Fork positioner fully extended: 1980 mm fork spacing (AK/AK), fully retracted: 540 mm fork spacing (AK/AK) Heater, full cabin, Rear blue spot, fingertip control, full cabin with heater, discharge indicator with counter, LED lighting

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Ndodpfx Agsxdxhreiod Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 18000 Main Drive Spindle speed range 20000 Number of axis 5 Movement X-Axis Movement 650 mm X-Axis Rapid Traverse 50 m/min Y-Axis Movement 765 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 50 m/min Table Table load 500 kg Tools Slots in storage 30 Nsdpfx Agexpkpxeiedd This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, mileage: 158,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 01/2016, emission class: euro6, color: white, number of seats: 3, Year of construction: 2016, total length: 5,500 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Attention!!! Sale preferably to commercial customers. Internal ID Number: [ 2989 ] ----Optional add-ons: * 12–64 month warranty (valid throughout the EU) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing available, also with no down payment * Reversing camera/tow bar can be retrofitted on request! ----Vehicle highlights: * 19% VAT deductible * German vehicle * Regularly serviced * 2nd owner * Euro 5 emissions standard * High roof + long wheelbase (L2-H2) * Air conditioning * Cruise control * Towing capacity = 3,000 kg * Ready for immediate use Further equipment: Overhead storage compartment in cab, driver airbag, exterior mirrors with integrated indicators, 100 Ah battery, 105 Ah battery, on-board computer, brake pad wear indicator, driver assistance system: emergency braking assist, windscreen with upper band filter, 130 A alternator, rear wing doors (opening angle 180 degrees), body/build: standard high-roof van, black radiator grille, cargo partition wall without window, steering column (steering wheel) adjustable in height and reach, engine 2.5 L – 110 kW CRDi CAT, radio preparation, 2 speakers, wheelbase 3,435 mm, tyre repair kit, particulate filter, low emissions compliant with Euro 5, right-side sliding door (cargo/passenger compartment), front and rear mud flaps, driver’s seat height adjustable, seat cover/upholstery: fabric/artificial leather, seats in cab: dual passenger seat, start/stop system, 3 x 12V sockets in cab, electronic immobiliser, central locking with remote control, permissible gross weight 3.5 t Looking for leasing or financing? We offer attractive deals – also possible with no down payment! Please feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Nsdowzrdqjpfx Agiodd Sat: 9:00 am – 2:00 pm ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typographical mistakes, and prior sale excepted. The binding condition of the vehicle is defined exclusively in the purchase contract on site or through written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 900 mm, turning diameter: 300 mm, spindle bore: 86 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 270 mm, controller model: FANUC 31i-B, TECHNICAL DETAILS Swing diameter over bed: 780 mm Swing diameter over slide: 700 mm Maximum turning diameter: 300 mm Maximum turning length: 900 mm Bar capacity: 76 mm Spindle Chuck size (main/sub-spindle): Ø254 mm Spindle bore (main/sub-spindle): Ø86 mm Spindle speed: 4,000 rpm Spindle motor (max./continuous): 26 / 15 kW Spindle drive: integrated motor Spindle flange: A2–8 C-axis indexing: 0.001° Travel axes X1/X2 axis: 270 / 190 mm Z1/Z2 axis: 920 mm Y axis: ±120 mm Rapid traverses Rapid traverse speed X/Y/Z axes: 24 / 24 / 24 m/min Rapid traverse speed ZB axis: 12 m/min Guideway system: Box Guide Turret Tool stations: 2 × 12 External tool size: Ø25 mm Internal tool size: Ø40 mm Indexing time: 0.2 s/step Turret system: Wedge type Njdpfxjxltbcs Agisdd Driven tools Motor power (max./continuous): 5.5 / 2.2 kW Tool speed: 4,000 rpm Collet size: Ø20 ER32 Tool type: BMT65 MACHINE DETAILS Control: FANUC 31i-B Tank and supply system Coolant tank: 230 l Lubrication tank: 8 l Electrical data Power consumption: 69 kVA Line voltage: 220 / 400 V Dimensions & weight Dimensions (L × W x H): 3,670 × 2,170 x 2,601 mm Weight: 11,000 kg EQUIPMENT LNS bar feeder

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,400 h, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 40, mount diameter: 40 mm, Equipment: chip conveyor, High pressure 20 bar Ndjdpfoxb Rtbjx Agiod MACHINE EQUIPPED WITH: 4 vices + 40 cones + arbors + tools

Condition: good (used), Year of construction: 2003, Good condition,live tools, measuring arm. Parts shown by hand not come. Technical details shown on pictures. Nodpjwybg Ssfx Agijdd

Condition: used, color: other, Year of construction: 2019, operating hours: 400 h, Power internal combustion engine: 46 HP (34 kW) GVW: 2.625 kg Make of engine: Kubota CE mark: yes Serial number: HHKHS802EJ0001184 Njdpeuficzefx Agiodd Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 21,927 h, Control Unit Brand FANUC Model Series 21i-MB General Data Measurements width 2770 mm Measurements depth 4950 mm Measurements height 2804 mm Machine weight 15000 Ndjdpfx Agoxfwxleiod Main Drive Spindle speed range 8000-12000 Spindle motor power 22 kW Number of axis 4 Movement X-Axis Movement 850 mm Y-Axis Movement 700 mm Z-Axis Movement 750 mm Workpiece Workpiece weight 500 kg Table Outer length 500 mm Outer width 500 mm Tools Max weight 8 kg Max tool diameter 40 mm Max tool length 400 mm This HYUNDAI KIA HS500i Horizontal Machining center was manufactured in 2008. The 4 axis machine has a total of 21927 working hours. It operates through a FANUC Series 21i-MB control unit. The machine reaches a 12000 rpm spindle speed. It is in good technical condition, has full documentation and is ready for testing. Application Types Milling

Condition: used, color: other, Year of construction: 2019, operating hours: 430 h, Power internal combustion engine: 46 HP (34 kW) GVW: 2.625 kg Make of engine: Kubota CE mark: yes Serial number: HHKHS802CJ0001185 Ndjdpsuficuofx Agijd Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand FANUC Model 21i-MB Main Drive Spindle speed range 10000 Spindle motor power 11/15 kw Tool taper ISO 40 Number of axis 4 Movement X-Axis Movement 1060 mm Y-Axis Movement 510 mm Z-Axis Movement 635 mm Nodpfewanncex Agisdd Table Outer length 1200 mm Outer width 800 mm Min distance between vertical spindle and table 150 mm Max distance between vertical spindle and table 785 mm Table load 800 kg Media Chip conveyor Yes Additional Equipment 4th axis TANSHING positioning function M Spindle center coolant: 20 bar pressure Spindle center coolant: 20 bar pressure Spindle center coolant: 20 bar pressure Spindle center coolant: 20 bar pressure This 4-axis Hyundai Kia VX500 vertical machining center was manufactured in 2007. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia VX500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1997, operating hours: 8,900 h, Serial number: EM02CK10xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21601 Specifications: Model year unknown Approx. 8,900 hours Power: 97 kW Nsdoxp Av Rjpfx Agiodd Undercarriage (see pictures) Tracks replaced approx. 100 hours ago (around 2 years ago) Track width: 60 cm Machine width: approx. 297 cm Bucket AC/climate control See video Delivery by agreement Description:Hyundai Robex 210LC-3H excavator with 5 buckets.Tracks were replaced about 2 years ago and have been used for a maximum of 100 hours since. Something wrong with the gas Delivery by agreement. Hours: 8900 Own weight: 20360 Width: 297 Kw: 97 Model: 210LC- 3H gravemaskin m/ 5 skuffer. Byttet belter for 100 timer siden

Condition: new, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 20 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 21.200 kg Make of engine: 6BT5.9-C Top speed: 5 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 220 l/min Emission level: Stage II / Tier II Nodjxxmxzopfx Agiedd Delivery terms: EXW Transport dimensions (LxWxH): 9,57x2,8x2,92 Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: new, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 20 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 21.200 kg Make of engine: 6BT5.9-C Top speed: 5 km/h Condition Nedpfx Aoxxmxujgijdd General condition: very good Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 220 l/min Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,57x2,8x2,92 Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information