Used Hyundai 25 D-7 for sale (162)

Condition: used, Year of construction: 2012, operating hours: 3,100 h, mast type: duplex, color: other, Forklift 7 tons (7200 kg) – Sideshift – 3,100 operating hours – Diesel = Additional Information = Year of manufacture: 2012 Condition: No damage Reference number: 17 Codpjwwkwnofx Aaqsgn Please contact Miguel Cubas for further information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), power: 17 kW (23.11 HP), fuel type: diesel, color: yellow, first registration: 05/2021, Year of construction: 2021, operating hours: 756 h, Model year: 2021 Drive: Crawler Unladen weight: 3,500 kg Technical condition: very good Visual condition: very good Please contact Emad Al Shogran for further information. HYUNDAI R25Z-9AK Year of manufacture: 2021 Cgjdpfowuuqgjx Aaqen Operating hours: 756H Weight: 3,500 kg Serviced annually, top machine Engine: Kubota Kinshofer tilt rotator with quick coupler 3 buckets: trench bucket 300mm and 600mm + grading bucket 1200mm = Company Information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Phone: Mobile: Mrs. Sabine Faust Email.

Condition: used, mileage: 17,758 km, power: 160 kW (217.54 HP), fuel type: electric, gearing type: automatic, first registration: 07/2022, next inspection (TÜV): 07/2027, color: grey, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, Special equipment: Mica paint / mineral effect paint, heat pump for heating/air conditioning Additional features: Csdsyfztzjpfx Aaqogn 6 speakers, storage pockets on front seat backs, passenger airbag, switchable passenger airbag, driver airbag, active brake light (ESS), drive type: rear-wheel drive, audio navigation system, audio system: RDS radio, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors (both), painted exterior mirrors, exterior mirror lower shell painted black, battery heating system, turn signal integrated into exterior mirror, roof spoiler, Dynamiq package, automatic headlight activation / light sensor, electronic brake-force distribution, electric motor 160 kW (cont. 53 kW), electronic stability control (ESC) with brake assist, driver assistance system: active lane keeping assist (LKAS), driver assistance system: active blind spot assist, driver assistance system: driver attention warning, driver assistance system: exit warning, driver assistance system: Highway Driving Assist 2.0 (HDA 2.0), driver assistance system: autonomous emergency braking with front collision warning (FCA), driver assistance system: hill start assist, driver assistance system: parking assist front and rear, driver assistance system: drive mode selection, driver assistance system: high beam assist, driver assistance system: rear occupant alert (ROA), driver assistance system: multi-collision brake, driver assistance system: rear cross-traffic assist, driver assistance system: emergency call system (ERA GLONASS / eCall), driver assistance system: lane following assist (LFA), driver assistance system: extended traffic sign recognition (speed limiter/cruise control), electric windows front and rear with up/down automatic function, window frame trim in high-gloss black, Bluetooth hands-free system, luggage net in boot/cargo area, luggage compartment cover/roller blind, transmission for electric vehicle, cup holder rear, cup holder front, seatbelt tensioners, glove compartment drawer, LED tail lights (pixel design), heated rear window, rear window wiper, HV battery 72.6 kWh (lithium-ion), inductive smartphone charging tray, auto-dimming rear-view mirror, 12.25-inch color instrument display, ISOFIX child seat mounts, body: 5-door, 2-zone automatic climate control, head airbag system, adjustable rear headrests, radiator grille, active air flaps, adjustable, charging cable with Type 2 connector, on-board charger (3-phase), driver's seat lumbar support, electrically adjustable, front passenger lumbar support, electrically adjustable, steering wheel with shift paddles, steering column adjustable for height, steering column adjustable for reach, front and rear LED reading lights, headlight range adjustment, alloy wheels, rear air vents, rear center armrest, navigation-based adaptive cruise control with distance control (NSCC), emergency charging cable (ICCB), electric parking brake (EPB), digital radio reception (DAB+), tire repair kit, tyre pressure monitoring system, rearview camera, sliding rear bench seat, split-folding rear seat backrest, shift/selector lever (shift by wire), window fog detection/control, full LED headlights, front side airbags, center front side airbag (central airbag), black side protection strips, remote services system (Blue Link), height-adjustable front seat belts, driver's seat left side

Condition: used, Year of construction: 2012, operating hours: 12,943 h, Type of fuel: LPG Empty weight: 3.960 kg Dimensions (LxBxH): 27 x 12 x 21 cm Lifting capacity: 2.500 kg Lift height: 460 cm Clearance lift height: 145 cm Fork length: 1.200 mm Cgedpfsxtqdkjx Aaqjn - Year: 2012 - Documentation available: Yes - CE certificate present: No - Serial number: Hyundai 25L-7A - Operating hours: 12943 - Lifting capacity: 2500kg - Lifting height: 4600mm - Overhead clearance: 2100mm - Free lift: 1450mm - Fork length: 1200mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights - Mast: Triplex - Drive: LPG - Motor brand: Hyandai - Transport dimensions: 270mm x 120mm x 210mm (l x w x h) - Transport weight [kg]: 3960kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,411 h, load capacity: 2,500 kg, lifting height: 3,300 mm, free lift: 155 mm, fuel type: gas, mast type: duplex, construction height: 2,160 mm, motor manufacturer: Ford, gearing type: automatic, fork length: 1,200 mm, turning radius (outer): 2,300 mm, tire condition: 80 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 3,750 kg, color: yellow, Equipment: CE marking, cabin, front guard, full service history, head guard, lighting, sideshift, Equipment details: Year of manufacture: 2012 Load capacity: 2,500 kg Lifting height: 3,300 mm Fork length: 1,200 mm Operating hours (counter): approx. 6,000 hours Mast type: standard Mast height: 2,175 mm Machine length to fork heel: 2,527 mm Turning radius: 2,300 mm Operating weight: 3,750 kg Travel speed: 20 km/h Brake system: oil-bath Engine output: 50 HP / 2,450 rpm Equipment: SE tires front and rear Full road lighting with indicators Adjustable steering column Rearview mirror Operating manual Load backrest Integrated side-shift Csdpfx Asydph Doaqegn Reverse warning alarm Safety driver's seat with seat belt, fully adjustable in all directions Overhead guard Roof cover Front work lights Rear work lights Attachments: * Side-shift * Load backrest Additional information: Regularly serviced, complete with lifting logbook, machine inspection report, as well as structural and main inspection documentation. Machine shows signs of wear consistent with use. Operating hours are as read from the meter. You can reach us during business hours, from 8:00 a.m. to 4:00 p.m. We speak German. All information is provided without guarantee; errors and changes excepted. (This listing has been translated automatically, so translation errors may occur.)

Condition: used, Year of construction: 2023, operating hours: 522 h, Equipment: all wheel drive, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance without exception. Hyundai HL 970A 4x4 - Including bucket - Tires: 26.5 R25 Csdpfexhbmfox Aaqegn - Radio - Operating hours: 522 - Reversing camera - Air conditioning - Central lubrication system Errors and prior sale reserved. Internal vehicle number: W47 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance without exception. WhatsApp support available! If you have questions about the vehicle or need more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: used, Year of construction: 2016, operating hours: 11,448 h, Equipment: ABS, all wheel drive, Hyundai HL 970 XT - Central lubrication system - LED work lights - Rear-view camera - Joystick steering - Air-suspended driver's seat - Rear-view camera - Heated mirrors Errors and prior sale excepted. Internal vehicle number: 10672. WhatsApp support available! Codpfx Aov A Enysaqogn If you have questions about the vehicle or need further information, feel free to contact us via WhatsApp.

Condition: used, Year of construction: 2016, operating hours: 1,985 h, Equipment: all wheel drive, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be scheduled in advance without exception. Hyundai HL 970 4x4 - Includes bucket - Tires: 26.5 R25 - Radio - Operating hours: 1,985 Cgedpfxjxhbige Aaqen - Rear-view camera - Air conditioning - Central lubrication system Errors and prior sale excepted. Internal vehicle number: W50 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be scheduled in advance without exception. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, power: 5 kW (6.80 HP), gearing type: other, fuel type: gasoline, color: black, driver cabin: other, Vehicle location: Bovenden, Body: Hyundai gasoline high-pressure cleaner ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Codpfxjvhk Szj Aaqogn - .

Condition: used, first registration: 06/2016, Year of construction: 2016, operating hours: 9,837 h, HYUNDAI HL 730-9 A wheel loader with mulching bucket and clamshell bucket, automatic climate control • All-wheel drive • Year of manufacture: 2016 • Operating hours: 9,835 • Approx. 27,000 km Attachments: • Mulching grapple bucket / clamshell bucket • Bucket capacity: 2 m³ • Power (kW / HP): 100 / 136 • Operating weight: 10,500 kg • GVW: 15,500 kg • Last safety inspection: 14/11/2022 Additional equipment: • Automatic climate control • Reversing camera • CD radio Csdpfx Aaowmpfpeqogn • Comfort seat • Automatic / torque converter transmission - German machine, always maintained / all servicing performed by authorized workshop!! - One owner! - Ready for operation! Errors and prior sale excepted!

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, load capacity: 7,000 kg, lifting height: 4,500 mm, Equipment: cabin, Internal combustion forklift Machine brand: HYUNDAI Designation: HDF 70 Year of manufacture: 2005 Meter reading (h): 18,430 Own weight (kg): 10,101 Load capacity (kg): 7,000 Lift height (mm): 4,500 Fork length (mm): 2,400 mm Side shift fork, fork positioner STABAU from 2018 Fuel type: DIESEL Technical documentation for UDT Technical condition: used, very good . Cjdpfx Aajv Edvbjqegn

Year of construction: 2021, condition: new, Field of application: Construction Attachment suited for: Loaders Bucket volume: 6.5 m^3 We manufacture high dump bucket sets for all brands-models. The bucket in the photo is made for the Hyundai HL760. The capacity of bucket is 6,5m^3 For detailed information please contact us. Cedpopa Rnwjfx Aaqegn

Condition: new, Year of construction: 2024, Machine: Hyundai HX225 Edge Length: 1200mm Csdpfer Ar Anex Aaqjgn Capacity: 1.2m^3 For detailed information and inquiries please contact us. Galen Group produces buckets for 20years

Condition: ready for operation (used), power: 99.29 kW (135.00 HP), Year of construction: 2008, Vehicle description Wheel loader HYUNDAI HL740-7 Year of manufacture 2008 according to counter 15,752 hours approx. 12 tons 135 HP - incl. high-tipping bucket - Volvo quick coupler (without hydraulic cylinder) - additional circuit up to fork carriage Cjdpfjv Eap Djx Aaqjgn - cabin with heating and air conditioning - original paint Sales price: 23,900.00 net Cheap delivery also possible! New pallet fork in stock for an additional payment!

Condition: used, machine/vehicle number: HHKHFH14JD0000066, Year of construction: 2013, operating hours: 3,535 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 115 mm, mast type: duplex, construction height: 2,552 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: HHKHFH14JD0000066 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: Very good Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Volt: 80V Codpfou D Tq Njx Aaqjgn Battery Ah: 775Ah Battery manufacturer: Hoppecke-Battery Battery year of construction: 2012 Battery condition: 60 - 80% Sideshift, Fork positioner, 3rd valve, 4th valve, windshield, heating, full cab, -Duplex mast V400 -4th line to fork carriage -Fingertip -Fork forks 1,200 mm -Tine adjustment with sideshift -Full cab with heating -Air-suspended seat -Rotating beacon -Drive disengagement with open doors

Condition: used, machine/vehicle number: N80711249, Power: 147 kW, operating weight: 31,530 kg, with quick coupler system, operating hours: approx. 24,800 h Cgsdpfxoyf R Dvs Aaqen

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD2200 FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 45° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET. ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. Swing Over the Bed Ø 550 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 380 MM Maximum Turning Length 565 MM Bar Capacity Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” – 203 MM 10” - [254] MM Spindle Bore Ø 76 MM Spindle Speed (rpm) 4,500 RPM Motor (Max/Cont.) 18.5 / 15.0 KW Torque (Max/Cont.) 206 / 125.3 NM Spindle Type BELT Spindle Nose A2-6 FEED Travel X 215 MM Travel Z 580 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Cgodpex Tqppjfx Aaqen Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.12 SEC / STEP TAILSTOCK Taper MT 4 Quill Diameter Ø 65 MM Quill Travel 80 MM Travel 513.7 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 23 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W) 2,925 x 1,650 MM Height 1,820 MM Weight 4,100 KGS INCLUDED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD OIL SKIMMER BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) MACHINE MANUALS & OPERATOR HANDBOOKS TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK - 4MT WITH STD LIVE CENTER

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100L FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 10 STATION HIGH SPEED RIGID SERVO TURRET. 2,800 RPM 26.0 /18.5 KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 500 MM Maximum Turning Length 1,300 MM Bar Capacity Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (rpm) 2,800 RPM Motor (Max/Cont.) 26.0 / 18.5 KW Torque (Max/Cont.) 1,123 / 657 NM Spindle Nose A2-11 FEED Travel X 265 MM Travel Z 1,350 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 10 Tool Size - OD 25 MM² Tool Size - ID Ø 50 MM Indexing Time 0.15 SEC / STEP TAILSTOCK Type QUILL TYPE TAILSTOCK [PROGRAMMABLE TAILSTOCK] Taper MT5 [MT4] Cedpsx Tiggefx Aaqegn Quill Diameter Ø 100 MM Quill Travel 120 MM TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 27 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W)4,405 x 1,978 MM Height 1,850 MM Weight 7,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO STEADY REST PREPARATION - PROGRAMMABLE CLAMPING & TRAVEL PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FACTORY FITTED OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) TOOLBOX STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE STANDARD LIVE CENTER

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD2200Y FANUC 0IT PLUS CNC LATHE WITH Y AXIS. MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 4,000 RPM MAIN SPINDLE. ▪ 6,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET - BMT55P ▪ HARDENED & GROUND BOX GUIDEWAYS Swing Over the Bed Ø 820 MM Swing Over the Carriage Ø 650 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 610 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 76 MM Spindle Speed (Rpm) 4,000 RPM Motor (Max / Cont.) 18.5 / 15.0 [22.5 / 15.0] KW Torque (Max / Cont.) 206.2 / 125.4 [215.0 / 143.3] NM Spindle Type BELT Spindle Nose A2-6 Travel X 215 MM Travel Y 110 (± 55) MM Travel Z 680 MM Rapid Speed X 24 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 30 M / MIN HARDENED & GROUND BOX GUIDEWAYS Number of Tools 12 [24] Tool Size - OD 25 MM² Tool Size - ID Ø 20 MM Indexing Time 0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7] KW Milling Tool Speed 6,000 RPM Torque (Max / Cont.) 52.5 / 26.5 NM Collet Size Ø 16 – ER25 Type BMT-55P TAILSTOCK Taper MT 4 Quill Diameter Ø 80 MM Quill Travel 120 MM Travel 680 MM TANK CAPACITY Coolant Tank 200 L Lubricating Tank 2.0 L Electric Power Supply 27 KVA Thickness of Power Cable OVER 25 MM² Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,380 x 1,800 MM Cgsdpfjx Th Nyex Aaqjn Height 1,950 MM Weight 4,700 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CHIP - CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 6.0 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD TURRET UPGRADE - 12 STATION 24 POSITION BMT55P, LIVE TOOLS 6K RPM, 5.5 KW STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) FRONT DOOR INTERLOCK TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100M FANUC 0IT PLUS CNC HIGH POWER TURNING CENTRE WITH HARDENED & GROUND BOX GUIDEWAYS, HIGH SPEED SERVO TURRET, C-AXIS & DRIVEN TOOLS & 12" STD CHUCK Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 740 MM Bar Capacity - Main Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (Rpm) 2,800 RPM Motor (Max. / Cont.) 26.0 / 18.5 KW Torque (Max. / Cont.) 1,123 / 657 NM Spindle Type BELT [GEARLESS] Spindle Nose A2-11 C-Axis Indexing 360° (0.001°) Travel X 265 MM Travel Z 830 MM Rapid Speed X 24 M / MIN Rapid Speed Z 30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.15 SEC / STEP LIVE TOOLS Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max. / Cont.) 70.0 / 35.4 NM Collet Size ER32 - Ø 25 Type BMT65P QUILL TYPE TAILSTOCK [PROGRAMMABLE BUILT IN TAILSTOCK] Taper MT5 [MT4] Quill Diameter Ø 100 MM Quill Travel 120 MM Tailstock Travel 830 MM TANK CAPACITY Coolant Tank200 L Lubricating Tank 1.8 L POWER SUPPLY Electrical Power Supply Cgodpfx Aox Thzveaqon 27 [30 GEARLESS] KVA Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 3,885 x 1,800 MM Height 1,850 MM Weight 6,050 KGS STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) TOOLBOX MAIN SPINDLE - 2,800 RPM, 26.0 / 18.5 KW, 1123 NM BELT DRIVEN TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM FACTORY FITTED MACHINE OPTIONS CHIP BUCKET STANDARD CHIP CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD (RATED AT 60HZ SUPPLY) BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - MANUAL PROGRAMMABLE TAILSTOCK IN LIEU OF STDMACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET – BMT65P. 2,800 RPM 26.0 / 18.5 [35.0 / 25.0 GEARLESS] KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. C-AXIS MAIN SPINDLE. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET.

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE Cgsdex Thu Nopfx Aaqen HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: used, mileage: 185,000 km, power: 110 kW (149.56 HP), first registration: 02/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,000 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales advisor. Attention! Sale preferably to commercial customers* Internal ID Number: [2992] Cgjdox Amr Nspfx Aaqen ----Vehicle Highlights: * 19% VAT deductible * German vehicle * Regularly serviced * Euro 6 standard * Maxi high roof & long wheelbase (L3-H2) * Glass transporter frame (removable upon request) * Large multimedia display * Air conditioning * Tow bar (3,000 kg) * Cruise control * Rear view camera * Load compartment with wooden lining * and more… ---- Leasing or financing required? We offer attractive terms – also possible without down payment! Please feel free to contact us. ---- Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Notice: All information provided online is non-binding and serves as a general description of the vehicle only. Errors, mistakes, and prior sale reserved. The binding condition of the vehicle is determined exclusively by the purchase agreement on site or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our business customers.

Condition: used, mileage: 185,000 km, power: 110 kW (149.56 HP), first registration: 02/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales consultant. Attention! Preferred sale to commercial customers. Internal ID number: [2992] ---- Vehicle Highlights: * 19% VAT deductible * German vehicle * Regularly serviced * Euro 6 standard * Maxi High & Long (L3-H2) * Glass transport rack (available without rack upon request) * Large multimedia screen * Air conditioning * Trailer hitch (3,000 kg) * Cruise control * Reversing camera * Cargo area wood-lined * etc... ---- Leasing or financing required? We offer attractive options – possible even without a down payment! Feel free to contact us. ---- Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ---- Note: Cgsdpfx Aox Amr Aoaqen All information on the internet is for guidance only and serves merely as a general vehicle description. Errors, typing mistakes, and prior sale excepted. The binding specifications of the vehicle are determined exclusively in the local sales contract or by written assurances. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,500 rpm, travel distance X-axis: 680 mm, travel distance Y-axis: 95 mm, travel distance Z-axis: 680 mm, spindle motor power: 18,500 W, total height: 1,950 mm, overall weight: 4,800 kg, product length (max.): 3,380 mm, number of axes: 3, This 3-axis Hyundai Wia HD2600Y horizontal turning machine was manufactured in 2025. It features a swing over the bed of Ø820 mm, a maximum turning diameter of Ø300 mm, and a turning length of 610 mm. The spindle supports up to 3,500 rpm with a motor power of 18.5 kW. It includes a 12-tool turret and a milling tool speed of 6,000 rpm. Consider the opportunity to buy this Hyundai Wia HD2600Y horizontal turning machine. Contact us for more information. • Condition • Original packaging • 0 operating hours Capacity • Swing over bed: Ø820 mm • Swing over carriage: Ø650 mm • Max. turning diameter: Ø300 mm • Max. turning length: 610 mm • Bar capacity (sub): Ø81 mm • Chuck size (main): 10" Spindle • Spindle bore (main): Ø91 mm • Motor (max/cont.) (main): 18.5/15 kW (25/20 HP) • Motor (max/cont.) (sub): 5.5/3.7 kW (7.4/5 HP) • Torque (max/cont.) (main): 400.7/243.7 Nm (295.7/179.9 lbf·ft) • Torque (max/cont.) (sub): 46.6/25.3 Nm (34.4/17.7 lbf·ft) • Spindle type: Belt • Spindle nose (main): A2-8 • Spindle nose (sub): Ø110 mm • C-axis indexing: 0.001° Feed • Travel (Z/2B): 680 / 680 mm • Rapid traverse (X/Y): 30 m/min • Rapid traverse (Z/2B): 24 / 24 m/min • Slide type: Box guide Turret • No. of tools: 12 (24) • Tool size (OD): Ø25 mm • Tool size (ID): Ø40 mm • Indexing time: 0.2 sec • Y-axis type: Wedge type Live tool • Milling tool speed: 6,000 rpm • Motor (max/cont.): 5.5/3.7 kW • Torque (max/cont.): 52.6/25.6 Nm • Collet size: Ø16 mm (ER25) • Type: BMT55 Tailstock Codeycwlzspfx Aaqjgn • Taper: MT#4 • Quill diameter: Ø80 mm • Quill travel: 120 mm • Travel: 680 mm Tank capacity • Coolant tank: 200 l • Lubricating tank: 2 l Power supply • Electric power supply: 27 kVA • Thickness of power cable: Over 25 mm² • Voltage: 220/60 (200/50) CNC • Controller: HYUNDAI WIA FANUC i-Series – Smart Plus / SIEMENS 828D

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, total height: 1,755 mm, overall weight: 5,800 kg, controller manufacturer: FANUC, controller model: Series, product length (max.): 3,400 mm, number of axes: 2, This Hyundai Wia HD 2600 horizontal turning machine was manufactured in 2025. It features a swing over the bed of 630 mm, a maximum turning diameter of 460 mm, and a bar capacity of 80 mm. The spindle supports a speed of 3,500 rpm with a motor power of 26/18.5 kW. It also includes a 10-tool turret and a rapid traverse rate of 24/30 m/min. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia HD 2600 machine we have for sale. Contact us for more information. • Original packaging Capacity • Swing over the bed: 630 mm • Swing over the carriage: 460 mm • Max. turning diameter: 460 mm • Max. turning length: 659 mm • Bar capacity: 80 mm • Chuck size: 10" Spindle • Spindle bore: Ø91 mm • Motor (max/cont.): 26/18.5 kW (35/25 HP) • Torque (max/cont.): 734/522 Nm (541/385 lbf·ft) • Torque (additional value stated): (828/748 Nm) • Spindle type: Belt • Spindle nose: A2-8 • C-axis indexing: 0.001° Feed • Rapid traverse rate (X/Z): 24 / 30 m/min (945 / 1,181 ipm) • Slide type: Box guide Turret / Tooling • No. of tools: 10 (12) • Tool size (OD): 25 mm • Tool size (ID): Ø50 mm Csdpfx Aajycvwceqogn • Indexing time: 0.15 sec Tailstock • Type: MT#5 (Built-in tail stock - MT#4) • Quill diameter: Ø100 mm • Quill travel: 120 mm • Travel: 680 mm Tank Capacity • Coolant tank: 180 L (47.6 gal) • Lubricating tank: 18 L (4.75 gal) Power Supply • Electric power supply: 27 kVA • Thickness of power cable: Over 16 mm² • Voltage: 220/60 (200/50)