Used Ciata 55 Slc for sale (6,272)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x1000x1900 mm Fedpfjvz Hq Hsx Ahdogh Weight 300 kg Total power requirement 1,2 kw

Condition: used, functionality: unexamined, nominal power (apparent): 210 kVA, For more precise data, see the nameplate Fgjdpfx Ahexn S Exjdeh

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,387 h, functionality: fully functional, overall weight: 191 kg, total length: 1,500 mm, The machine was a backup unit intended to ensure uninterrupted operation, but its capacity is now too small for our needs, so we are selling it. We’ve only turned it on occasionally over the past 10 years or so. It can be tested on-site. Fedpfxsy Ncn As Ahdegh

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value Fsdpfenygvrjx Ahdogh 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l Fgjdsfdkb Eepfx Ahdsh WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: excellent (used), Part suitable for: cars Technical condition: very good Fodpfx Asx N R Nzshdogh Optical condition: very good

Condition: new, functionality: fully functional, Offering punched strip with fabric inlay for hydraulic punching machines and automatic punching presses, approximately 7–9 mm thick, in the well-known qualities BP-50, BP-55, and BP-455, cut to length and pre-prepared with step or wedge joint, including two-component adhesive. Fgjdpfx Aswduymohdoh

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, VECOPLAN 55/18/3 Mill Inlet width: 550 mm Inlet height: 180 mm Main motor: 55 kW Number of lower drive axles: 2 Bottom drive motor: 3 kW Number of upper drive axles: 1 Upper drive motor: 3 kW Pneumatic guard opening Fgsdpfx Aewiuywohdjh Electrical panel Ready for operation Year of manufacture: 2000

Condition: used, Beams for wide-span racking Manufacturer: Mecalux Model: ZE-55 Length: 1900 mm Stock: 60 units Fgjdpfeyinuysx Ahdjh Matching shelves are also available.

Year of construction: 2013, condition: used, Year of manufacture: 2013 Empty weight: 157 kg Carrying capacity: 295 kg GVW: 452 kg Working height: 732 cm General condition: good Technical condition: good Fgodpfxey S Unao Ahdeh Visual appearance: good Manufacturer: Genie Type: SLC-24 Year of manufacturing: 2013 Weight: 157 KG Product number: 22059 Lifting height: 7,32 m Transport height: 2,18 m Lifting capacity: 295 KG Machine is technically in good condition. Documents incl. CE. Price: € 1.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: used, Pallet racking system by Voest, approx. 55 linear meters, used 🧰 Product features • Manufacturer: Voest • Color: green • Condition: used, see photos • Frames: 13 pcs., pre-assembled, 400 x 110 cm • Beams: 48 pcs., with a clear span of 426 cm, profile 150 x 50 mm Fgedpfx Ahjzg U Adsdsh • Safety: 96 pcs., galvanized safety pins • Fasteners: 52 pcs., Hilti concrete anchors • Load capacity: 1,600 kg per level • Field load: 8,000 kg • Load capacity label: included Over 1,000 linear meters in stock Frame heights up to 10 meters Available depths: 75 cm and 110 cm Available beam lengths: 426 cm and 566 cm Matching depth beams, insert gratings and insert shelves available upon request 💰 Price €2,250 net, excluding VAT • Quantity discounts: upon request • Shipping costs: Europe-wide, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10433 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking systems, used & new Description: Are you looking for high-quality storage racking systems to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking systems immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racks (Elvedi cantilever racks, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough clearance. 2. Commission auction: Conducting auctions on commission. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, operating pressure: 160 bar, total length: 1,310 mm, high-pressure hose length: 50,000 mm, total height: 1,030 mm, total width: 1,020 mm, type of input current: DC, empty load weight: 320 kg, input voltage: 12 V, fuel: regular/benzine 91, overall weight: 320 kg, water tank capacity: 500 l, power: 17.7 kW (24.07 HP), volume flow: 3.3 m³/h, pressure (max.): 160 bar, We are offering this like-new Dirojet Whale Built-In Plus 55/160 high-pressure cleaner, manufactured in 2024. Dimensions (L × W × H): 1310 × 1020 × 1030 mm Gross weight: 320.000 kg Net weight: 320.000 kg Serial number: 23-260 Year of manufacture: 2024 Water flow rate: 55 l/min Maximum operating pressure: 160 bar Engine power: 17.7 kW Engine power: 24 HP Engine type: Gasoline engine (Honda GX690) Voltage of the high-pressure hose reel: 12 V DC Fjdpfezg Adiox Ahdegh High-pressure hose length: 50 m High-pressure hose diameter: 1/2" Fill hose length: 35 m Fill hose diameter: 3/4" Water tank volume: 500 l Country of manufacture: Italy If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine, clamping force 320t, shot weight 6935g, screw 130mm, preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-cavity, 4-stage, including removal set, conveyor belt, output 1825 preforms/hour. Output approximately 17,000 preforms/hour. MHT mold, 72-cavity, for 27.8g PCO 1810 or 1881. Fedpfx Ahjnxkxwodjgh The machine comes from our own preform production and was in operation until we replaced it with our new machine.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 22 kW (29.91 HP), - Mill for, e.g., processing lumps - Unused machine - Open rotor Fgedpfep E Anvjx Ahdeh - Grinding mechanism 650 mm x 550 mm - Control system Spare parts can be supplied. (Sieve, blades, etc.)

Condition: excellent (used), Catalog number 7291 TECHNICAL DATA - inlet width 500mm - inlet height 200mm - shaft width 630mm - blade length 630mm - number of blades 2 pcs - screen dimensions 60x60mm - toothed pull shaft, bottom - bottom shaft motor 4kW - toothed pull shaft, top - top shaft motor 4kW - feed belt length 4100mm - feed belt width 400mm - feeder motor approx. 2kW - main motor 55kW - automatic reversing - feeder dimensions (L/W/H) 4670x760x720mm - machine dimensions (L/W/H) 2550x1800x1300mm - weight approx. 4000kg – German production - automatic reversing Fsdpfxezwwpbj Ahdogh – used shredder, very good condition Original photos Net price: 118900 PLN Net price: 27651 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, mileage: 136,976 km, power: 125 kW (169.95 HP), first registration: 09/2001, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,350 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel, number of seats: 2, total length: 9,400 mm, total width: 2,550 mm, total height: 4,050 mm, Year of construction: 2001, Equipment: ABS, electric window regulation, seat heater, = Additional Options and Accessories = - Heated mirrors - Tachograph (driver's card) - Fixed - Halogen lamp - Short cab - Manual - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Payload: 5280 kg, Tare weight: 6710 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 200 liters, Fifth wheel coupling: Fixed, Suspension type: Leaf suspension, Cab type: Short cab, Tachograph (driver's card), Electric windows, Color: White, Heated mirrors, Lighting type: Halogen lamp, Heated seats, Engine power: 125 kW (168 hp), Number of cylinders: 6, Engine displacement: 5883 cc, Fuel: Diesel, Euro: 3, Transmission type: Manual, Transmission type: ZF, Gears: 6, Clutch pedal, Power steering, ABS, Starter battery, Number of seats: 2, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Spare wheel, Spare wheel tread depth: 13% = Additional Information = Transmission Transmission: ZF, 6 gears, Manual transmission Axle Configuration Tire size: 285/70R19.5 Brakes: Drum brakes Suspension: Leaf suspension Axle 1: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 2: Double tires; Tire tread depth left inner: 10 mm; Tire tread depth left outer: 12 mm; Tire tread depth right inner: 11 mm; Tire tread depth right outer: 13 mm Weights Tare weight: 6,710 kg Payload: 5,280 kg GVW: 11,990 kg Condition Overall condition: average Technical condition: average Optical condition: average Fgsdpfey Eck Ajx Ahdsh Damage: none Number of keys: 1 Identification Registration number: BL-JL-81 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The assurance of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Magnopro I-Cut 7550” die-cutting machine Item for sale: 1 x Magnopro I-Cut 7550 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Fodpjz I Tguofx Ahdegh Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2009, Used Machine Year of Manufacture: 2009 Features and Technical Specifications: Professional crosscut, rip, and miter saw Motor power: 1.8 kW Power supply: 230 V Blade speed: 4,200 rpm Blade diameter: 255 mm Turntable diameter: 328 mm Maximum cutting capacity: 80 × 305 mm Fgjdpfx Aszy D Agshdeh Miter adjustment: up to 45° to the left and right, and up to 60° to the right Saw head tilt: from -45° to 45° Locked positions: 0° / 15° / 22.5° / 31.6° / 45° to the left and right, and 60° to the right Cutting capacity at 45° tilt to the left: 42 × 305 mm Cutting capacity at a 45° tilt to the right: 35 × 305 mm Cutting capacity at a 45° miter to the left: 80 × 204 mm Cutting capacity at a 60° miter on the right: 80 × 147 mm Combined cutting capacity on the left: 42 × 204 mm Combined cutting capacity (right): 35 × 147 mm Dimensions L × W × H: approx. 1,200 × 700 × 450 mm Weight: approx. 24.2 kg Base plate and turntable made of die-cast aluminum Pulling function for wide workpieces Laser projection to display the cutting position Workpiece supports that extend on both sides Folding stops for repeated length cuts Adjustable, tall aluminum stops Screw clamp for securing workpieces Adjustable cutting depth limit Fine adjustment of the angle setting Saw blade guard Chip collection bag Easy saw blade change Suitable for cutting ceiling moldings and crown molding

Condition: used, Zwick / Roell Fgedpfxoz Iy Tzo Ahdjh Universal testing machine / Material testing machine Zwick / Roell Z005 5 kN Allround table-top Complete material testing system with testXpert II and extensive accessories For sale is a used universal testing machine from the manufacturer Zwick / Roell. The testing system is suitable for tensile, compression, and material tests as well as for component, plastic, metal, and parts testing. Technical data: Manufacturer: Zwick / Roell Type: Z005 / 5 kN Allround table-top Testing system type: S0101 Max. testing force: 5 kN Crosshead speed: 0.0005 – 3,000 mm/min Return speed: max. 3,000 mm/min Testing space width: 640 mm Testing space height without attachments: approx. 1,400 mm Dimensions of testing system with support profiles and machine electronics (W × D × H): approx. 1,244 × 690 × 1,878 mm Weight with typical attachments: approx. 291 kg Mains connection: 230 V / 50–60 Hz Connection: 1L / PE / N Equipment: Zwick / Roell Z005 5 kN testing machine Zwick / Roell machine electronics Handheld control unit with emergency stop Zwick / Roell testXpert II testing software PC system with monitor, keyboard and mouse Load cell and measuring components SAIM cross- / positioning table Specimen holder and clamping tools Clamping plate Connection and measuring cables Original operating instructions Software / documentation Further extensive accessories as shown in the pictures Application areas: Tensile testing Compression testing Material testing Component testing Plastic and metal testing Parts testing Automotive testing Quality assurance Research and development Scope of delivery: 1 × Zwick / Roell Z005 5 kN Allround table-top Machine electronics and handheld control unit PC workstation with testXpert II Testing and clamping tools Load cell / sensor technology SAIM positioning table Documentation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use are present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table Fsdpfx Asywundehdjgh -Manufacturer: KLW Lutz, workbench / solid worktop with base cabinets -Worktop: 2500/700/H850 mm -1x drawer cabinet: 2 drawers, layout/height see photos -Transport dimensions: 2500/700/H855 mm -Weight: 152 kg

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00680, load capacity: 235 kg, arm reach: 2,550 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 6640-235/2.55 manufactured in 2014.09. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6640-235/2.55 Model Number: IRB-6640 Year of Manufacture Robot: 2014.09 Warranty term (months): 12 Fjdpfxoz Izkbo Ahdjgh   Payload (kg): 235 Reach (mm): 2550 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1310   Controller: IRC5 Year of Manufacture Cabinet: 2014.09 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: refurbished (used), Year of construction: 2009, machine/vehicle number: R-00692, load capacity: 180 kg, arm reach: 1,310 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 6640-180/2.55 manufactured in 2009.04. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 6640-180/2.55 Model Number: IRB Year of Manufacture Robot: 2009.04 Warranty term (months): 12   Payload (kg): 180 Reach (mm): 1310 Repeatability (mm): ± 0.07 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 2250   Controller: IRC5 Year of Manufacture Cabinet: 2012.10 RCC Length (m): 14   Teach Pendant: DSQC679 Fgodpsz Izn Hsfx Ahdeh Teach Pendant Cable Length (m): 15

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: New Technical condition: New Front tire type: Non-marking Front tire condition: New Rear tire type: Non-marking Rear tire condition: New Battery voltage: 80V Battery type: PzS Battery year of manufacture: 2023 Battery condition: 80 - 100% Description: Price includes new safety inspection (UVV), new unit with 12 months warranty. The battery will be regenerated with a power cycler, including a Kappa test. Charger included with plug. We will gladly arrange cost-effective transportation for you. Lease-to-own is generally possible. We are an official Jungheinrich partner. Side shifter, Fgsdjz N I Nzjpfx Ahdsh 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, load protection grid, full free lift, CE certificate, safety light.

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Fodpjzbxznofx Ahdjgh Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Fgjdpfxow Idb Ho Ahdeh Y axis working area: 850 mm Main Electrospindle power: 5 KW Total number of drilling spindles: 19