Used Hurlimann 911 Xt for sale (26,293)

Condition: new, Year of construction: 2023, Equipment: all wheel drive, ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Pickup dates must be arranged in advance without exception. Hyundai HL 970A XT 4x4 with bucket - Including bucket - Radio - Operating hours: 10 hrs - LED work lights - Transport width: 2.97 m - Engine power: 242 kW - Displacement: 8.9 L Errors and prior sale excepted. Internal vehicle number: W37 Lajdpfxjxhbkdj Af Sok

Condition: used, mileage: 25,045 km, power: 96 kW (130.52 HP), first registration: 02/1983, overall weight: 7,490 kg, fuel type: diesel, color: blue, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, total length: 7,100 mm, total width: 2,500 mm, total height: 2,990 mm, number of seats: 6, Equipment: all wheel drive, parking heater, +++Long double-decker ++ Power steering ++ Fair condition +++ H-certificate+++ +++ Originally only 25,045 km +++ +++ Already equipped with side impact and underride protection +++ +++ Thus prepared for technical modification to truck type +++ LA 911 B with long double cab, 130 hp naturally aspirated diesel engine, 4x4 all-wheel drive, and power steering, directly from the German Federal Agency for Technical Relief (THW), regularly serviced, 9 seats, all with seatbelts. During the technical modification to truck type, the number of seats had to be reduced to 6 – but the remaining seats can be used as seats when stationary. Tow bar ring eye with braked towing capacity of 9,500 kg, transfer case with low-range gearing and 2 differential locks (center and rear), technically sound and roadworthy. From a technical perspective, the truck has undergone a fresh inspection, including lubrication, new fuel filters, a new air dryer cartridge, a brake fluid service, and a check of all fluid levels. The wheel brakes were also checked and adjusted. We also replaced the seal on the rear axle differential. The body of the cab and superstructure has already been repaired several times by the THW and repainted by hand. It is in good condition and free of rust. The paintwork is rather dull in places. This was taken into account when determining the price. The engine starts immediately and the transmission shifts smoothly—the 911 runs perfectly. Box dimensions: 3000 x 2450 x 1700 mm Wheelbase: 4250 mm Ljdpfxjwfbg As Af Seak +++ Errors, changes, and prior sale reserved.

Condition: excellent (used), Year of construction: 2008, lifting capacity: 15 t double sided rope drum rope diameter 8mm at 6 strand Laedpoimhcbofx Af Sjk fine lift Lifting height 8.5 meters

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world Laodpfxjm E I D He Af Ssk loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA installation and training not included. ( price depend on loacation and on request)

Condition: excellent (used), Year of construction: 2010, Polar 115 XT cutter Year of manufacture: 2010 Jogger (other manufacturer) Elevator (other manufacturer) Cutting length: 115 cm Infeed height: 16.5 cm Infeed depth: 115 cm 15” TFT color display - Complete electrical equipment - Work area lighting / optical cutting line indicator - Lockable main switch (without key) - Automatic motor start Lasdjxx Rmcjpfx Af Sek - Nickel-plated table surface / side guides - Air table with blower - Cover plate for the pressure beam - 2 HSS knives in a safety container - 10 knife change strips - Program memory for up to 1998 programs - 3 measuring systems: metric / inch / shaku; switchable - Fraction value input with automatic conversion to decimal system - Automatic entry of single dimensions (positioning) - Automatic dimensioning via program control - Repeat counter with operator guidance (Eltrotakt) - Electronic calculator (basic arithmetic functions) with memory function - Adjustment of pressure application - Variable, programmable size for material infeed and ejection - Programmable pressing without cutting - Knife automatic (knife automatic active) – automatic cutting sequence start for a series of cuts - Knife automatic (knife automatic ready) – cut release by briefly pressing the cut buttons - Variable pre-pressing time to optimize cutting frequency depending on material type - Programming during the cutting process - Program protection against unintended deletion - Pedal-controlled air table switch-off - Dimension correction for knife thickness tolerance - Automatic diagnostics with fault message display - Inter-service cut counter - Toolbox with comprehensive set of tools, instruction manual, spare parts catalog, electrical schematic - Left/right side tables with air cushion, 100 x 100 cm - Rear table cover

Condition: good (used), Year of construction: 2006, machine/vehicle number: 7641227, Programs with touch screen Color Display Chrom Airtable POLAR LW 1000-4: Paper Stack Lift Polar RA-4: Automatic Jogger Lsdek D T Eyspfx Af Sjak Cleaned & Tested

Condition: used, Year of construction: 2016, operating hours: 11,448 h, Equipment: ABS, all wheel drive, Hyundai HL 970 XT Lajdpfx Ajv A Enyof Ssk - Central lubrication system - LED work lights - Rear view camera - Joystick steering - Air-suspended driver's seat - Rear view camera - Heated mirrors Subject to errors and prior sale. Internal vehicle number: 10672.

Condition: used, mileage: 55,341 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 7,490 kg, fuel type: diesel, color: orange, gearing type: mechanical, loading space width: 2,430 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, Year of construction: 1990, total length: 7,700 mm, total width: 2,480 mm, total height: 3,000 mm, number of seats: 9, Equipment: all wheel drive, parking heater, Good condition and fully functional, no need for repairs. +++ Vehicle is roadworthy ++ Power steering ++ 7.5t possible with H-certificate +++ Fresh inspection carried out with brake fluid change, lubrication, and new fuel filters. Additionally, the air dryer cartridge and wiper blades have been replaced. Both starter batteries renewed, and fluid levels of all components checked and topped up as necessary. The front-mounted pump has been removed; the openings in the radiator grille and bumper were professionally sealed. This 1113 runs very well and is ready for immediate collection. 9 seats (private registration as a truck allows for 6 seats), All-wheel drive 4x4, center and rear-axle differential lock, towing ring 1.5t. Transfer case with off-road reduction and differential locks, walk-in equipment box with equipment mounts, Wheelbase (axle spacing) 4,200 mm +++ Maximum speed according to documents: 85 km/h, actual speed by GPS: 88 km/h Cabin interior dimensions behind the driver’s seat (LxWxH) in mm: 1560 x 2180 x 1460 Box exterior dimensions (LxWxH) in mm: 3130 x 2400 x 1500 Box interior dimensions (LxWxH) in mm: 3050 x 2400 x 1450 Laodpfxjwm Tx Hj Af Ssk —Subject to change, prior sale, and errors— ?191?

Condition: excellent (used), mileage: 107,385 km, first registration: 04/2019, fuel type: diesel, axle configuration: 8x4, fuel tank capacity: 500 l, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2019, lifting height: 18,200 mm, Equipment: ABS, air conditioning, crane, cruise control, low noise, parking heater, retarder, soot filter, trailer coupling, = Additional options and features = - Aluminum fuel tank - Leaf suspension - Electric windows - Electrically adjustable exterior mirrors - High beam headlights - Speed limiter - Refrigerator - Air horn - Navigation system Lodpfjuxurwsx Af Soak - Fog lights - Particulate filter - Sleeper cab - Sun visor - Spoiler - Stability control - Auxiliary heater - Toolbox - PTO (power take-off) - Central locking - Towing jaw = Further information = General Information Cab: Sleeper cab Technical Information Number of cylinders: 8 Engine displacement: 16,353 cc Transmission Gearbox: OPTICRUISE GEARBOX, automatic Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Dual tires Rear axle 2: Dual tires Dimensions and Weights Unladen weight: 19,670 kg Wheelbase: 515 cm Functional Lifting capacity: 8,000 kg Cargo area dimensions: 550 x 242 x 125 cm Crane: FASSI F275A.2.25 E-DYNAMIC, mounted behind cab Tipper: Right / Rear Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request SCANIA R650 V8 XT 8X4 WITH 2-WAY TIPPER + FASSI F275A.2.25 E-DYNAMIC CRANE EURO 6 L PACKAGE 650 HP DRIVE 8X4 DIFF LOCK WHEELBASE 515 CM LEAF SPRUNG CR20N SLEEPER CAB WITH AIR CONDITIONING, NAVIGATION, REFRIGERATOR, LEATHER, CAMERA AUTOMATIC TRANSMISSION RETARDER TRAILER COUPLING WITH HYDRAULIC CONNECTIONS 2-WAY TIPPER DIMENSIONS: 550X242X125 FASSI F275A.2.25 E-DYNAMIC CRANE 5X HYDRAULIC EXTENSION RADIO REMOTE CONTROL 5TH AND 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX. LIFTING CAPACITY 8000 KG MAX. LIFTING CAPACITY AT 1455 CM: 1310 KG MAX. WORKING HEIGHT: 1820 CM 2X OUTRIGGERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss Prismo VAST XT Year of manufacture: 2003 Retrofit Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm C99 control with operating panel VAST XT probe head VAST GOLD probe head (optional) 13-position probe changer magazine Probe change rack Laedpfxewyukdo Af Ssk Probe accessories Calibration sphere Technical documentation Additional accessories HP workstation with monitor Calypso Basic software, latest version Additional options available Available at short notice Delivery without the automatic feeder shown

Condition: good (used), Year of construction: 2013, Trailer-Mounted Boom Lift - Hematec Dino 210 XT Manufacturer: Hematec Model: Dino 210 XT Year of manufacture: 2013 Technical specifications Working height: 21.00 m Platform height: 19.00 m Lateral outreach: 11.70 m Slew range: 500° Total weight: 2,350 kg Length: 7.55 m Width: 1.92 m Transport height: 2.18 m Platform dimensions: 1.30 m x 0.70 m Platform capacity: 215 kg Stabilizers: Folding outriggers Support width: 4.30 m Ground pressure per outrigger: max. 21.8 kN Drive: Electric 220 V / 16 A Special features 230 V power supply to platform Basket rotation +/- 45° Hydraulic drive Diesel generator Inspection / Service Dates TÜV (German roadworthiness certificate): valid until 06/2027 Lajdpfx Asxvrr Isf Sek UVV (German safety inspection): valid until 08/2026 Operating hours: 4,235 hrs as of 09/2025 Price stated plus statutory VAT. Interested? We are always happy to assist you! You can reach us Monday to Friday from 7:00 am to 4:00 pm! Subject to change, error, and prior sale.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 025, overall weight: 2,000 kg, grinding length: 15 mm, rotational speed (max.): 6,000 rpm, grinding diameter: 2 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Grinding diameter: 0.1 – 2.0 mm Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm Z stroke: 67 mm Y stroke: 35 mm A axis: 63° B axis: 360° Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Station 2: Flute grinding and relief grinding Spindle diameter: 70 mm Spindle power: 0.30 kW Frequency converter: 2,000 – 6,000 rpm Grinding wheel for flutes, diameter: 150 mm Grinding wheel for reliefs, diameter: 100 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Laedpfoxnl Dhex Af Sek Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,200 mm Weight: 2,000 kg EQUIPMENT Three-axis simultaneous + 2 robot axes

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Ledpfx Aexx Sawef Sjak Design & Features - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Condition: used, mileage: 18,779 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 9,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,350 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, total width: 2,450 mm, total height: 3,000 mm, Equipment: all wheel drive, Good condition and fully functional without any repair rope. +++ Vehicle is roadworthy ++ Power steering ++ Weight reduction to 7.5 t possible with H-certificate +++ Lasdpfxjwbl U Nj Af Sek Fresh inspection with brake fluid change, lubrication, and fuel filters. New air dryer cartridge and wiper blades. Both starter batteries replaced, and the fluid levels of all components checked and topped up if necessary. This 1113 runs really well and is ready to go – ready for pickup. 9 seats (6 seats would be possible if registered privately as a truck), 4x4, center and rear differential lock, 1.5t tow bar ring Transfer case with low-range gear and differential locks Walk-in tool box with tool holders Wheelbase (axle base) 4200 mm +++ Top speed according to documents = 85 km/h, actual with GPS 88 km/h Interior cabin dimensions from behind driver's seat LxWxH in mm: 1560 x 2180 x 1460 Exterior box dimensions LxWxH in mm: 3130 x 2400 x 1500 Interior box dimensions LxWxH in mm: 3050 x 2400 x 1450 Subject to changes, prior sale, and errors reserved- *178*

Condition: used, mileage: 400,209 km, power: 427 kW (580.56 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,150 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, retarder, seat heater, spoiler, traction control, = Additional Options and Equipment = - Adaptive cruise control - Alarm system - Roof spoiler - Differential lock - Double glazing - Remote central locking - Leather interior - Lift axle - Engine brake - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater = Notes = 315 cm wheelbase. 80,000 kg Gross Combination Weight (GCW). Adjustable fifth wheel. Coupling height: 120 cm. Full air suspension. Retarder. Hydraulic system. Engine PTO. Custom interior. = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tyre size: 385/65R22.5; Steered; Left tyre tread: 20%; Right tyre tread: 20% Rear axle 1: Tyre size: 315/80R22.5; Twin tyres; Left inner tyre tread: 10%; Left outer tyre tread: 10%; Right inner tyre tread: 10%; Right outer tyre tread: 10% Rear axle 2: Tyre size: 315/70R22.5; Left tyre tread: 10%; Right tyre tread: 10% Weights Unladen weight: 10,890 kg Payload: 15,110 kg Gross vehicle weight: 26,000 kg Interior Upholstery: Leather Identification Model number: R580 V8 XT / 6x2 BOOGIE / RETARD Ljdpfjwvg Imox Af Soak = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We strive to provide accurate information, but no rights can be derived from the information provided in these texts.

Condition: ready for operation (used), Type RU 991 Longitudinal stroke 4500 mm Ljdpjvn Tc Ajfx Af Sjak Transverse stroke 1000 mm Vertical stroke 1000 mm Table dimension 6155x1000 mm Spindle speed 15 - 1500 rpm (RPM) Dimensions 6400 x 2400 x 2600 Weight 18T

Condition: like new (used), Year of construction: 2022, functionality: fully functional, number of ink cartridges: 5, number of print heads: 2, resolution (max.): 1,440 dpi, space requirement length: 1,560 mm, space requirement width: 2,730 mm, space requirement height: 1,450 mm, Equipment: documentation/manual, Roland Texart XT-640S-DTG The XT-640S-DTG is the ideal choice for print shops, apparel manufacturers, and custom product companies looking for a fast, reliable, and high-quality DTG printing solution. The Roland Texart XT-640S-DTG is an industrial multi-station direct-to-garment (DTG) printer specifically designed for the mass production of custom apparel. Multi-station printing: Print up to 12 garments simultaneously (with 200 x 260 mm templates), or 8 larger garments (300 x 400 mm), or 4 extra-large garments (390 x 490 mm). Fast production: Up to 450 T-shirts/hour (CMYK, 200 x 260 mm template, production mode) or 225 T-shirts/hour (quality mode) are achievable. Versatility: The movable base plate and dockable templates allow you to combine different garment sizes in a single operation, from children's sizes to XXXL. Software: The package includes the CADlink Digital Factory Apparel Pro (Roland DG Edition) RIP software, which supports web-to-print workflows and automates the generation of the white underprint. Technical Parameters / Technical Information Print Technology: Piezoelectric Inkjet JIG (Print Tray Size): 200 x 260 mm (12 pcs), 300 x 400 mm (4 pcs), 390 x 490 mm (4 pcs) Platform Size: 1695 x 1500 mm Colors: Cyan, Magenta, Yellow, Black, White Resolution (dots per inch): Maximum 1440 dpi Media Compatibility: Cotton, cotton-rich blends, white polyester Height Adjustment: Manual, automatic sensor Connection: Ethernet 10/100 Power Requirements: 230 V 16 A 2P+E Power Consumption: Maximum 1.2 kW in operation; 150 W in standby mode Dimensions/Weight (with stand): 2730 (W) x 1560 (D) x 1450 (H) mm, 620 kg Ambient Conditions: Operating Temperature: 18 – 25 °C, Humidity: 35–65% relative humidity (non-condensing). Switched off: Temperature: 15–30 °C, Humidity: 20–80% relative humidity (non-condensing). Laedpjwk Ni Nofx Af Sek Accessories: RIP software, 20 JIGs, four DOCK-XTS-3s, user manual, power cable, cleaning kit, installation toolkit. We purchased the machine new from an official Roland service center in Hungary. It was only commissioned in January 2022 because we were unable to fully utilize the printer's capacity. About three-quarters of a year ago, the ink was professionally drained by a service technician, and it is currently out of service. If you are interested, the official Roland service center in Hungary can help with technical questions and the current condition of the machine, as the device has been continuously serviced.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 090, overall weight: 2,000 kg, grinding length: 15 mm, rotational speed (max.): 6,000 rpm, grinding diameter: 2 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid constitutes a binding commitment to collect the item punctually between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Grinding diameter: 0.1 – 2.0 mm Collet: B 8 Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm Z-axis stroke: 67 mm Lajdsxnlyiepfx Af Sjk Y-axis stroke: 35 mm A-axis: 63° B-axis: 360° Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Station 2: Flute and relief grinding Direct-drive spindle diameter: 70 mm Direct-drive spindle power: 0.30 kW Frequency converter: 2,000 – 6,000 rpm Grinding wheel diameter flute grinding: 150 mm Grinding wheel diameter relief grinding: 100 mm MACHINE DETAILS Electrical data Operating voltage: 3 x 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,200 mm Weight: 2,000 kg EQUIPMENT Three simultaneous axes 2 robot axes

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. Laodpfjxx R S Eex Af Sek - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: good (used), functionality: fully functional, Thermal-Dynamics plasma and oxy-fuel cutting table, model ULTRA-CUT 300XT CE Technical specifications Working area: 12000 x 3000 mm Overall dimensions: 14000 x 5000 mm Machine weight: approx. 5000 kg Power supply: single-phase 220 V - 3 Amp Torch height control: automatic adjustment Lajdpfx Afoxlqx Ej Ssk Equipped with a CNC controller featuring motion control, I/O, user interface, and an integrated optional plasma height control, all in one package. Runs on Windows 7, 2 GB RAM, 2 USB ports, 120 GB SATA SSD hard drive, etc. Sold with its manual. Retrofit completed in 2021. Selling due to modernization of facilities.

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture XT - Precise multi-sensor measuring system The Baty Venture XT is a sophisticated vision measurement system designed for a wide range of measurement requirements. It is available in three different versions, each covering specific applications: Venture XT VI-2510-MAN (Manual) This manual version is ideal for operators who prefer the flexibility of direct control. With a large measuring range of 250 mm x 100 mm, the manual version offers precise optical measurements and is ideal for inspecting small and medium-sized workpieces. The device is controlled via a joystick and offers simple operation, while the Fusion 3D software captures data accurately and reliably. Venture XT VI-2510-CNC (CNC) This CNC variant offers fully automated measuring processes for repetitive and precise series measurements. With a measuring range of 250 mm x 100 mm, it is ideal for companies that carry out frequent measurements in production environments. The combination of optical and tactile measuring methods ensures comprehensive data acquisition. The Fusion 3D software makes it easy to create and save programs to make the inspection process more efficient. Venture XT VI-3030-CNC-XT (Advanced CNC) The extended CNC version offers even more flexibility with a larger measuring range of 300 mm x 300 mm x 200 mm and additional functions. This model is particularly suitable for complex and large workpieces that require high-precision inspection. The zoom optics (6.5:1) are fully programmable and allow flexible adaptation to different measuring requirements. The Fusion 3D software can be used to automatically generate complex programs that include both optical and tactile measurements. Common features of all models: Optical and tactile measurement methods: each Venture XT system combines non-contact camera-based measurements with tactile measurements via a touch probe. Fusion 3D software: All variants use the powerful Fusion 3D software, which supports CAD import/export, SPC analysis and DXF overlays. Laedpfx Afjuyh R Ne Sjk Programmable LED lighting: Available for all variants to ensure optimum illumination of the measurement objects. The Venture XT is the ideal solution for companies looking for a flexible and precise measurement solution, whether for manual, motorized or fully automated processes

Year of construction: 2008, condition: excellent (used), Center height: 200 mm Distance between centers: 1250 mm large turning Ø over bed: 400 mm Ledpfoirtn Sex Af Seak Spindle Bore: 55mm Spindle mount: Camlock D1 6" mm Tailstock sleeve taper: 5 MK Spindle speeds: 1-297/1-861/1-2700 rpm electr. Connection: 400 V, 7.5 kW Required space: 2900 x 1800 x 1500 mm Weight: 2200kg

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 51 54 3, Spiral drill grinding machines - Year of manufacture: 2006 Lsdpfx Afexnl Nde Ssak - Fully functional, ready for demonstration - Grinding range: 3 – 21 mm - Conical surface grinding - Cross-point grinding - Point angle: 118° - 150°, steplessly adjustable - Speed: 2850 rpm - Weight approx. 25 kg - With additional dust extractor

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: electric, drive type: Elektro, Pressure Washer Condition: New Lsdexmb Sfepfx Af Soak Technical Condition: New Description: New

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture Plus XT - High-precision multi-sensor measuring system for very large workpieces The Baty Venture Plus XT is a sophisticated multi-sensor measuring system specially developed for the inspection of very large and complex workpieces. It offers outstanding precision and flexibility for companies that need to perform demanding quality checks. The robust design, combined with state-of-the-art CNC control and Fusion 3D software, enables automated and repeatable measurements on a large scale. Available models: VP-80100-CNC-XT With a measuring range of 800 mm x 1000 mm x 460 mm, this model offers the perfect solution for large workpieces. The combination of optical and tactile measurements enables precise data acquisition. The model is ideal for applications where medium to large components need to be measured efficiently and accurately. VP-80160-CNC-XT This variant has an extended measuring range of 800 mm x 1600 mm x 460 mm, making it ideal for longer and more complex workpieces. With the integrated 6.5:1 zoom optics and programmable LED lighting, this model offers high flexibility for the precise inspection of workpieces of different sizes. VP-100120-CNC-XT This model has a measuring range of 1000 mm x 1200 mm x 750 mm and is perfect for very large workpieces. The sturdy aluminum construction and the air bearing axes ensure maximum accuracy, even with heavier workpieces. The fully automatic CNC control and the user-friendly Fusion 3D software make it quick and easy to create inspection programs. Lasdouyh Tkjpfx Af Sek VP-100200-CNC-XT With an impressive measuring range of 1000 mm x 2000 mm x 750 mm, this is the largest variant of the Venture Plus XT available. This model is designed for the inspection of extremely large components and offers maximum precision and flexibility. Thanks to the Fusion 3D software, CAD import/export and DXF overlays can also be used with this variant to perform complex measurements. Common functions: Multi-sensor technology: Combination of non-contact optical measurements and tactile measurements for comprehensive data acquisition and maximum precision. CNC control: Enables the creation of fully automated programs for repeatable and time-saving inspections. Fusion 3D software: Supports CAD import/export, DXF overlays and the creation of detailed reports with statistical process control (SPC). Programmable LED illumination: Provides optimal illumination of the workpiece to improve edge detection and measurement accuracy. Zoom optics: 6.5:1 zoom optics, optionally expandable to 12:1, offers maximum flexibility for different measuring requirements. The Baty Venture Plus XT is the ideal solution for companies that require a flexible and precise inspection solution for large to very large workpieces. It offers the necessary precision and efficiency to meet even the most demanding production requirements