Used Spijkstaal 305 Lh for sale (2,834)

Condition: used, fuel type: electric, Tandem load wheel, load rollers, heavy-duty rollers, heavy-duty wheel, tires, solid rubber tires -Heavy duty wheel: double solid rubber tire -Tire type: 415/75-305 -Intake: Ø 90 x 58 mm -Bolt circle: Ø 220 mm -Dimension: Ø 415 x 215 mm -Weight: 49 kg Hpedpfxjlyvcxo Afpja

Year of construction: 1991, condition: used, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm notching: rectangle tool mm Hsdpfx Asd Ih Stjfpepa total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: used, Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shears Projection: 305 mm Two separate foot switches for the punching and shearing side, so punching and shearing can be carried out independently Support table on punching side Hpsdpfx Ajt Exprsfpoa Assortment of tools is included in the price

Condition: ready for operation (used), The device is used from a catering facility! We also sell various other catering equipment. Hpedpju Trctefx Afpsa

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Hjdpfx Aet Hw Nysfpepa Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: excellent (used), Year of construction: 1994, machine/vehicle number: LH 941148, measuring range: X 600 mm; Y 1.200 mm; Z 400 mm Hpjdpfeklyunox Afpja measuring uncertainty: MPEE 3,5 +L/300 μm; MPEP 3,5 μm temperature range: 18°C – 22°C temperature gradient: 1 K/h, 1 K/m, 2 K/d machine number: LH 941148

Year of construction: 2012, condition: excellent (used), Electric cable winch, cable winch, hoist winch, construction winch, electric cable hoist, cable hoist -Tension 1 layer: 2000 kg -rope speed 1 layer: 10 m/min - Wire rope: 10 mm -Cable length: 65 m per layer -electrically powered Hpodsdbyhljpfx Afpsa -without control -Number: 1x winches available -Dimensions: 1850/640/H650 mm -Own weight: 616 kg

Condition: good (used), Measuring range: 5 - 305 mm Hpedpfxjd Ex N Is Afpsa Serial Number: 2466

Condition: ready for operation (used), A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible. Hpsdpfx Ajw Uk A Djfpja

Condition: excellent (used), -Dimensions: 510x875x1400 mm -Serial number: 300758E -Condensation: Water -Refrigerant gas: 502 -Water-cooled compressor -Maximum gas pressure: 2000 KPa -Absorbed power: 2.55 kW -Maximum motor power: 1.90 kW -Protection: IP22 -Minimum water pressure: -Min: 200 (2 atm) Hodswxu R Uepfx Afpopa -Max: 400 (4 atm) -Power: 5.60 kW -Voltage: 380 V -Weight: 115 kg

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software Hpodpet Hw S Iofx Afpoa

Condition: not inspected (used), Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, table width: 515 mm, table length: 640 mm, Wire EDM machine Chmer EDM Type: CD 305G X-path: 400 mm Hpsdpfx Afeqgcimepoa Y-path: 300 mm X-path: 220 mm bed: 515 x 640 mm Year of construction: 2002 Hours: 16333 Including documentation and parameters Dimensions: 245x200x203 cm LxWxH

Condition: used, PLC control, expansion module, interface module Hedpfxjcar Ago Afpopa -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 305-7LA11 -Number: 1x modules available -Price: per piece -Dimensions: 50/135/H300 mm -Weight: 1.1 kg

Condition: used, Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60Hz 400V Nominal suction capacity: 300m³/h Ultimate pressure: 0,5hpa(mbar) Status: Refurbished Warranty- 12 months Hededbbzdepfx Afpjpa Included: Motor re-storage, repainting, electrical check Delivery time: ex stock

Condition: ready for operation (used), Year of construction: 2005, Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring plate dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection is possible. Hodpfx Aeu Ur Sqofpspa

Condition: excellent (used), Year of construction: 1979, Kapp AST‑305B – Technical Specifications Machine type: automatic hob and gear cutter sharpening machine Year of manufacture: circa 1979 Machine function: resharpening of hobs, spiral or straight gash cutters; wet or dry grinding Maximum tool diameter capacity: 12 inches (300 mm) Maximum tool length between centers: 27 inches (700 mm) Maximum table traverse: 21.56 inches (550 mm) Maximum grinding wheel diameter: 12 inches (300 mm) Maximum center height: 6.1 inches (155 mm) Table speed (infinitely variable): – deep grinding: 30 to 1000 mm/min – surface grinding: 3 to 16 mm/min Flute lead angle range: 0° to 45° Flute lead range: selectable, up to 24‑inch to zero or 12‑inch to zero Grinding spindle speed: 2200 rpm (optional 1000–4000 rpm) Axial grinding spindle adjustment: 16.54 inches (420 mm) Vertical grinding head adjustment: 11.81 inches (300 mm) Spindle taper: Morse 4 or steep taper 40 Preselectable single in-feed: range 0 to 9999 (units) Hpodpfx Afewwkt Ajpoa Machine dimensions: length 118 in × depth 82 in × height 93 in (≈3000 × 2080 × 2360 mm) Machine weight: approximately 7,500 lbs (3,000 kg) Control system: originally manual/analog, often upgraded with Allen‑Bradley PLC

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A Hpsdpomfn Rujfx Afpsa - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. -To operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, No reserve price - guaranteed sale at the highest bid! Hpjdpfovupv Eex Afpsa TECHNICAL DETAILS Measuring range: 800 x 1,000 x 700 mm Limit of length measurement uncertainty: E₀ = 2.8 + L/250 µm Condition: newly painted, desk shape with new worktop and current color design Control and operating elements CNC control: WPC Controller table: 1 piece Hand control panel: HT 400 Touch system: Renishaw PH10 Probe: switching probe Renishaw TP 20 Reference sphere: 1 piece Software and PC system Software: WM | QUARTIS GEO for regular geometry applications (as of 2022-1) CAD interface: WM I QUARTIS STEP import interface (as of 2022-1) Software dongle: 1 x Metrokey PC system: WIN 10 Monitor: 24 ’’ TFT

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Axle drive boring mill: WMW Union -Max. Speed: 2500 rpm -Torque: 25 Nm Hpjdpfx Aodz Drzsfpsa -Shaft: Ø 35 mm -Construction: B5 -Dimensions: 520/500/H270 mm -Weight: 45 kg

Condition: ready for operation (used), Year of construction: 2006, Working range X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Including Wenzel HT 400 hand control, computer with 2 TFT monitors and Kyocera laser printer. Without measuring probe. Documentation available. On-site inspection is possible. Hpjdpfxju T Rhzj Afpoa

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, measuring range X-axis: 650 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 500 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Hpsdjvupvlepfx Afpoa Measuring range: 650 x 1,000 x 500 mm Limit of length measurement uncertainty: E₀ = 2.8 + L/250 µm Condition: newly painted, desk shape with new worktop and current color design Control and operating elements CNC control: WPC Controller table: 1 piece Hand control panel: HT 400 Touch system: Renishaw PH10 Probe: switching probe Renishaw TP 20 Reference sphere: 1 piece Software and PC system Software: WM | QUARTIS GEO for regular geometry applications (as of 2022-1) CAD interface: WM I QUARTIS STEP import interface (as of 2022-1) Software dongle: 1 x Metrokey PC system: WIN 10 Monitor: 24 ’’ TFT

Condition: used, Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Wauquier, coolant pump type 5/69300 305 P Hpsdpfxoggtu Ro Afpea -Power: 0.15 kW/2800 rpm -Delivery rate: l/min -Immersion depth: 205 mm -Dimensions: 200/230/H400 mm -Weight: 12.6 kg

Year of construction: 1998, condition: ready for operation (used), Line for filling and labelling bottles of vinegar, can be used for other liquids (1) Vacuum Filler KRONES 305 VV/ SOV 04-V, bottle format: 0.75/ 0.5l, bottle dimensions: 78.3x242mm, output: 7000 bottles/h (2) Fully Automatic Labelling Machine KRONES ROBUSTA 722 600-10, output: 10,000 bottles/h, bottle dimensions: 50-125x150-350mm. Hpjdpfx Afed H E Uqepsa

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 305 mm Hjdpfx Ajchyygjfpepa -Short taper: 8 -Number: 1x discs available -Price: per piece -Weight: 15.3 kg

Condition: used, Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 305 mm -Passage: Ø 105 mm -Rezess: Ø 250 mm -Weight: 31.3 kg Hpodpjd Ira Rjfx Afpsa