Used Valtra/Valmet 6400 for sale (248)

Condition: like new (used), mileage: 640,000 km, Year of construction: 2018, IVECO STRALIS 480XP YEAR 2018 EURO 6 KM 640000 9.60X2.55XH2.65 MT CURTAINED BODY WITH HYDRAULIC RAISE AND LOWER COVER AND SUCTION DHOLLANDIA TAILGATE OF 20 QLI AUTOMATIC GEARBOX RETARDER INTELLIGENT THIRD AXLE FULL PNEUMATIC CLIMATE WHEN STOPPED TYRED AT %70 BEAUTIFUL VEHICLE Bweb Hajv Uydaehtcel BENITO 3383844139 MICHELE 3394588233

Year of construction: 2007, Condition: ready for operation (used), Two Husmann self-pressing containers are available. Volume: 20m³, drive power: 5.5kW, pressing force: 34t, top feed opening: 1470mm/1860mm, bottom feed opening: 970mm/1860mm, feed height: 1380mm, time per pressing process: 42s, stroke volume: 1.14m³, theoretical hourly output: 95m³, machine dimensions X/Y/Z: approx. 6400mm/2550mm/2600mm. Documentation available. An on-site visit is possible. Beb Hahtev Scruscowl

Condition: good (used), RS Simulators Type: Walk-in climate simulation cell KKC 22/45 Technical data: Temperature range -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range 10...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test chamber volume: 22m³ External dimensions (WxDxH) approx. 2600mm X 6400mm X 2800mm Test chamber (WxDxH) approx. 2200mm Χ 4700mm Χ 2300mm Beb Houviydsahtcjwl Door opening (WxH) approx. 2200mm X 2300mm Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 125740 € 2502.23 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 M 12 6,3 - 3 1/min Bob Hahtsu Twb Uscswl 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18,5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, Year of construction: 2025, operating hours: 0 h, Functionality: fully functional, volume flow: 12,800 m³/h, Fan for the paint mist screen, EEx-d protected motor Bweb Hahtev Nnw Docel Dalander motor, 2 speeds 12800 m³ + 6400 m³ The fan has only been in storage and has not yet been operated.

Condition: new, Year of construction: 2025, Automatic Sleeve Labelling Machine with a capacity of up to 400 cycles per minute. Shrink tunnel included. Stainless steel version (SS304), servo motor driven cutter, no-bottle-no-label, label feeding device with a feeding speed of up to 90m/min for fast and precise production. Brusher devices to help fixing the label in the right position, bottle position fixing device, adjustment to lift he machine according to the bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. - Specifications: max. speed of the machine in neutral: 100 cycles/minute; label Ø: 28-50 or 50-95 or 95-125mm; label length: 35-300mm; label thickness: 0.035-0.08mm; power: 2kW; machine dimensions: L6400xW1100xH2600mm; weight: 1500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bwsb Hahtov Nlavscol

Condition: used, Year of construction: 1998, Technical details: bore capacity in steel (diameter): 15 mm bore stroke: 100 mm threading: M16 Bwob Heu Idutoahtcol number of drilling stations: 3 drill spindle - Morse Taper: 3x MK2 spindle throat: 220 mm spindle distance: 335 mm headstock adjustment: (vertikal) 290 manuell mm feed:: mauell mm/U spindle speed:: 220-1600 / 400-3200 / 800-6400 U/min distance between table/spindle: min./max.: 235/525 mm table surface area: 1270 x 315 mm table adjustment: fest / fix mm total power requirement: nicht bekannt kW weight of the machine ca.: 0,72 t dimension machine xH: 1,4 x 0,8 x 2,25 m incl. cooling water system operation by hand and foot The drilling spindles are equipped as follows: 1x drill chuck 13mm 2x quick chuck 10mm *

Condition: excellent (used), Year of construction: 2018, MODEL TD 150 MAXIMUM CAPACITY 1.50 mm (400 N/mm²) WORKING LENGTHS 6.4 m INCH DEPTH 1250 mm BEND BLADE WIDTH 10 mm + additional guide 10 mm MAX. BENDING ANGLE 143° BENDING ACCURACY ± 0.5 Working length 6400 mm Insertion depth 1250 mm Max. Clamping opening 120 mm Max. bending capacity: S = 20 mm 1.50 Bending capacity: S = 20 mm1.50 steel plate 400 N/mm² Max. Bending angle 1.5 mm - 140°/ 2 mm - 130° Bending capacity S = 20 mm 50% of bending capacity Bending accuracy +/- 0.5° (with the use of crowning) Bending speed 0° to 140° in 1.5 s / 140° - 0° in 1.5 s Clamp travel distance 15/25 mm - 1250 mm Number of grippers 5 units Maximum gripper opening 28 mm (standard) Variable depth stop speed up to 380 mm / s Stop tolerance range +/- 0.1 mm per set Repeat accuracy Electrical voltage 400 V / 50 Hz / 3 phases + E Total electrical power 18.5 kW Rated current / fuse protection / pump 32 A / 63 ccm Dimensions 8100 x 2250 x 2100 mm Weight 10,500 kg Compressed air connection 8 bar Ambient operating temperature 5° - 35 Bwob Haov Rq E Tehtcel

Condition: good (used), RS Simulators Bob Hjuvi Nfsahtcowl Type: Walk-in climate simulation cell KKC 22/45L Technical data: Temperature range -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range 10...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test chamber volume: 22m³ External dimensions (WxDxH) approx. 2600mm X 6400mm X 2800mm Test chamber (WxDxH) approx. 2200mm Χ 4700mm Χ 2300mm Door opening (WxH) approx. 2200mm X 2300mm Year of construction: 2009 Technical data Sun simulation: Control insert: Mitronic STB1-8 Number of lights: 8 Ballast: Mitronic CP2k5 - 2ZS Ignitor: Hönle Light source: OSRAM Powerstar HQI 2000W W/D/S Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 941.92 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch OPTIONS: time of delivery with options 2 - 3 months from order 4-fold round guidings € 1.900,- Light barrier € 7.300,- Bwob Hahtovc H Hqscsl Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Working hour counter € 400,- Stroke counter € 400,- Deompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € incl.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Version : with large sliding table and cutting line laser, Sold with / without suction unit. This would be suitable for sawing graphite . Special superstructures : Sliding table is designed for workpieces weighing up to 150 kg and with dimensions dimensions of W x D x H of 1500 x 600 x 450 mm High-quality, powerful extraction system from RUMAC, type DS 64000 M, 2.2 kW, protection class IP65 ; Bwob Hjvx Ub Ijahtcsl . Technical data of the saw : Saw band 4550 x 20 x 0,8 mm ( actual : WIKUS , type TCT ) Roller guide 8 - 25 mm Cutting height max. 400 mm under the guide throat 630 mm Cutting speed approx. 250 - 2000 m/min , infinitely variable Drive power saw motor 4.0 kW Space requirement, W x D x H approx. 2 x 1.2 x 2.4 m plus extraction system Weight approx. 1.25 tons plus extraction system .

Condition: good (used), mileage: 1,154,742 km, power: 324 kW (440.52 HP), first registration: 04/2012, fuel type: diesel, color: green, axle configuration: 6x2, tire size: 385/65R22,5, fuel: diesel, wheelbase: 6,450 mm, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2012, Equipment: ABS, air conditioning, cruise control, parking heater, traction control, = Other options and accessories = - Digital tachograph - Tachograph (control unit) - Highline - PTO Beb Hov Hc Sqjahtcjwl - Pump - Parking air conditioning - Central lubrication = Remarks = Number of axles: 3, Configuration: 6x2, Payload: 15560 kg, Own weight: 12440 kg, Gross weight: 28000 kg, Total tank capacity: 700 liters, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 24000 kg, Number of locks: 1, Central lubrication, Suspension type: Air suspension, Type of cabin: Highline, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Parking air conditioning, Parking heater, Color: Green, Metallic, Engine power: 324 kW (434 Hp), Fuel: Diesel, Euro: 5, Gearbox type: Opti-cruise, Gears: 12, power steering, ABS, ASR, auxiliary drive, year of construction: 2012, body material: steel, system length: 605 cm, manufacturer of hook device and cable system: VDL, system type: VDL-S 21-6400 NL, pump, hook device height: 122, seats: 2 = More information = Gearbox Gearbox: 12 gears, automatic Axle configuration Brakes: disc brakes Axle 1: tire size: 385/65R22.5; steered; tire profile left: 4 mm; tire profile right: 3 mm; suspension: leaf spring Axle 2: tire size: 315/70R22.5; twin tires; tire profile left inside: 8 mm; tire profile left outside: 6 mm; tire profile right inside: 2 mm; tire profile right outside: 3 mm; Suspension: air suspension Axle 3: tire size: 0/0R0.0; double tires; tire profile left inside: 5 mm; tire profile left outside: 6 mm; tire profile right inside: 4 mm; tire profile right outside: 2 mm; Suspension: air suspension Dimensions Dimensions (L x W x H): 905 x 255 x 396 cm Weights Empty weight: 12,440 kg Payload: 15,560 kg GVW: 28,000 kg Functional Height of the loading area: 108 cm Pump: Yes Interior Number of seats: 2 Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification License plate: BZ-SR-18 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, mileage: 1,010,469 km, power: 338 kW (459.55 HP), first registration: 03/2014, fuel type: diesel, color: green, axle configuration: 6x2, tire size: 385/65R22.5, fuel: diesel, wheelbase: 4,900 mm, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2014, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, spoiler, traction control, trailer coupling, = More options and accessories = - AdBlue system - Roof spoiler - Differential lock - Electric windows - Remote central locking - Refrigerator - Lift axle - Jaw coupling - PTO - Radio - Rear view camera - Seat heating - Sun visor - Auxiliary heating - Toolbox = Remarks = VDL Hooklift. Type: S21-6400 21,000 kg. Distance hook till rear bumper: 620 cm. = More information = Technical information Number of cylinders: 6 Bwjb Hasvmrq Aehtcol Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65R22.5; Steered; Tire profile left: 30%; Tire profile right: 30%; Suspension: leaf springs Front axle 2: tire size: 315/70R22.5; twin tires; tire profile left inside: 20%; tire profile left outside: 20%; tire profile right inside: 20%; tire profile right outside: 20%; Suspension: air suspension Front axle 3: tire size: 35/70R22.5; tire profile left: 40%; tire profile right: 40%; Suspension: air suspension Dimensions Dimensions (L x W): 946 x 250 cm Weights Empty weight: 10,735 kg Payload: 16,265 kg GVW: 27,000 kg Identification Type number: XF 460 6x2 SPACECAB / HOOKLIFT / = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki We do our best to provide correct information, but no rights can be derived from the texts posted.

Condition: used, Year of construction: 2003, machine/vehicle number: 4196, Tischlänge : 2500 mm Tischbreite : 800 mm max. Tischhub : 650 mm Ständerkröpfung : 1000 mm Druckschuh : 600 Schleifschuhlänge : 300 mm Schleifschuhbreite : 150 mm Schleifbandlänge : 6400 mm Schleifbandbreite : 150 mm Bandabblaseinrichtung : Nein Obere Bandabdeckung : vorhanden Bandgeschwindigkeit 1 : 18 m/sec Laufrichtung : Links/rechts Gewicht ca. : 390 kg Motorleistung : 3 kW Absaugdurchmesser : 2x100 mm Bweb Haherc I N Setcjl

Condition: excellent (used), BIA Turnkey Test Systems Technical data: The BiA test bench offered here offers the possibility of testing suspension struts in various test environments. The suspension strut can be tested alone or including the wheel suspension to test its properties. Dimensions (Approx.): 4000 mm H x 5800 mm Width x 6400 mm Depth Data of the BiA test bench actuators: z-actuator (road side): - Max. static force: 72 kN - Stroke: +/- 125 mm - Max. speed: 2 m/s - Max. acceleration: 200 m/s² - Frequency range: 0.1 – 100 Hz y-actuator: (road side): - Max. static force: 21 kN - Stroke: +/- 50 mm - Max. speed: 1 m/s - Max. acceleration: 50 m/s² - Frequency range: 0.1 – 100 Hz Vehicle mass actuator: (sprung mass): - Max. static force: 30 kN - Stroke: +/- 125 mm - Max. speed: 1 m/s - Max. acceleration: 30 m/s² - Frequency range: 0.1 – 50 Hz Data of the Parker HPU (Hydraulic Power Unit): High pressure side: Bsb Hjtgikuoahtcowl - 1 x high pressure pump with AC motor - Proportional valve and check valve - Filter 5 μm with 2-threshold clogged up indicator - Pressure measurement - Manual valve - Max. oil flow: 450 l/min - Max. pressure: 28 MPa - Encapsulation to limit noise level to 70 dB Low pressure side: - 1 x manual valve - Filter 10 μm with single threshold indicator - Heat exchanger with moisture detector - Low pressure pump (2.2 kW) Other: - Oil level measurement inside the tank - Oil temperature measurement inside the tank - High pressure pump load management - Retrofitted moisture filters to prevent contamination of the oil with water Scope of delivery: (See picture) The chassis test bench from BiA and the HPU from Parker are sold. A HiL simulation environment is not part of the offer! (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 114800 € 2284.52 € 1200 mm 730 mm 1.200 x 500 mm 1.200 x 500 mm max. 30 m/min 3.7 kW 27 kVA kW 4600 mm 3040 mm 2200 mm 6400 kg 990 mm 930 kg 1250 kg 405 x 50 x 127 mm 0,001 mm 500 - 2.000 U/min 11 kW iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection & final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm Max. table speed (X axis) 30 m/min vertical feed by servo drive and ballscrew spindle transversal feed by servo motor and ballscrew spindle double V-slide wasy (turcite-B) for table longitudinal move grinding wheel spindle on 6 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange Bob Haevq Sarjhtcswl grinding wheel balancing stand balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Year of construction: 2003, Condition: excellent (used), Working travels 6000x1000x1200mm B-Axis milling head +/-90° Table size 6400x1000mm Bwebsd Rz Uvj Hahtcsl Spindle taper HSK-100 Spindle speeds -9000 rpm Tool changer 80 pos. Control SIEMENS 840D Coolant through spindle Tool measuring device Zero point clamping system 3R MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,000 h, Functionality: fully functional, operation weight: 12,000 kg, Hello, I have for sale a Biber 80 plus Valtra S 280/4 chipper assembly, tractor production year 2003, good condition, Sisu engine, twintruck air conditioning, reverse drive, Biber 2007 editor, inlet 100/65cm, 8 knives, Kronos crane 8.3m weight 12 tons, machines in good condition, after inspection. I invite you. Beb Hahjv Nxb Hjtcewl

Condition: excellent (used), axle configuration: > 3 axles, wheelbase: 1,360 mm, first registration: 03/1991, suspension: hydraulics, color: green, tire size: 235 / 75 R17.5 | load index 143/141J, Year of construction: 1991, Color: Green Bwsb Hahtjuu Hkiecol payload weight: 96400 kg. Manufacturer: Nooteboom Type: MCO-92VV Chassis number: L020053 Year: 03/27/1991 Weights: King pin load: 26,400 kg Axle load: 12,100 kg Total axle load: 96,800 kg GVW: 123,200 kg Empty weight: 26,800 kg Loading capacity: 96,400 kg Axles: Brand axles: BPW Hydraulic suspension All axles liftable Axle 1 friction steering Axles 2&3 rigid Axles 4 - 8 hydraulic steering Wabco braking with ABS Tires: 235 / 75 R17.5 | load index 143/141J Measurements: Length: 17,550 mm Extension: 7,000mm Max extended length: 24,550 mm Loading floor width: 2,740 mm / 3,240 mm Height: 950mm Wheelbase: 1,360 mm Additional information: Hatz Powerpack on Gooseneck Lashing all around Stake pockets Outriggers for widening loading floor Mechanical landing gear Spare wheel + holder Working lamps Rear bumper with lights King pin 3.5" Central greasing Cable remote control = Further information = Axis configuration Refen size: 235 / 75 R17.5 | load index 143/141J Axle brand: BPW Suspension: hydraulic suspension Rear axle 1: Double tires; lifting axle; Max. axle load: 12100 kg; steered Rear axle 2: Double tires; lifting axle; Max. axle load: 12100 kg Rear axle 3: Double tires; lifting axle; Max. axle load: 12100 kg Rear axle 4: Double tires; lifting axle; Max. axle load: 12100 kg; steered Rear axle 5: Double tires; lifting axle; Max. axle load: 12100 kg; steered Rear axle 6: Double tires; lifting axle; Max. axle load: 12100 kg; steered Rear axle 7: Double tires; lifting axle; Max. axle load: 12100 kg; steered Rear axle 8: Double tires; lifting axle; Max. axle load: 12100 kg; Steered Dimensions Dimensions (L x W): 1755 x 274 cm Weights Empty weight: 26,800 kg Payload: 96,400 kg GVW: 123,200 kg Functional Loading area height: 95 cm Extendable body: Yes Condition Technical condition: very good Visual condition: very good More information Contact Stefan Schaapveld for more information.

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm y travel 1000 mm z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm Bebjvwgpus Hahtcowl - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Center height 350 mm Turning length 1000 mm Max. swing diameter over bed track cover 600 mm Max. swing diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed range longitudinal and face 0.5 – 5000 mm/min Rapid traverse longitudinal + face 9 m/min Main drive 30 kW Dimensions of the machine with chip conveyor L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 General description: CNC manual input control with programming input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology and display of all functions in plain text. Control keyboard, screen and handwheel in a separate chip protection hood. The EPL control offers the following options: Programs can be entered and changed manually with direct operator guidance via the EPL control without any programming preparation. NC programs can be entered in ISO/EIA standard via the RS 232 serial interface, output or entered directly by hand. Processing cycles: Roughing cycles for longitudinal, face and contour turning, also with allowance. Thread. Undercuts DIN 509 form E and F and DIN 76, grinding allowance can also be programmed. Axial and radial recesses according to DIN 471 and 472, also with base finishing. Radii 90° and chamfers 45°. Automatic cutting radius compensation for cycles, undercut, recess, radius, chamfer. Programming: Set-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, sub-program technology, masking levels for program parts. Zero point shift. Operating mode selection via menu. Bwob Hahtevr Eh Eecel Program input and output: In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck • Hinged chip conveyor • 12-way tool disk turret, 6 of which are driven tool holders • Electronic handwheel • Coolant system • RS 232 interface • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • Various tool holders Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Bweb Hahtovu Hd Tscsl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: used, mileage: 1,300,162 km, power: 552 kW (750.51 HP), first registration: 06/2012, overall weight: 26,000 kg, fuel type: diesel, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, parking heater, FH16 750 Automatic transmission with VEB+ Air conditioning Bycool Beb Haov Dcidjhtcewl Frigo Roll-off tipper VDL S-20-6400 For containers up to 7 meters Ringfeder trailer hitch 6x2 drive with lifting axle / steering axle Very good condition Belgian truck

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 152070 € 2995.78 € 1200 mm 850 mm 1200 x 500 mm 1200 mm 1200 500 mm 5 - 30 m/min 0 - 5000 mm/min 0,001 mm 560 mm 0 - 2000 mm/min 0.001 mm 500 - 2200 1/min 11 kW 3.7 kW 3.1 kW 2.4 kW 4600 mm 2950 mm 2745 mm 4610 x 2290 x 2500 mm 6400 kg 900 mm 930 kg 1250 kg 405 x 50 x 127 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, checkout 7) Air purge spindle Longitudinal guides with double V shape, with Turcite-B coating Transverse and vertical feed with precision ball screws (class C2) and servo motors Longitudinal feed hydraulically Linear scale on Y-axis 675mm Fully enclosed splash guard with lamp Electromagnetic chuck plate 1200 x 500 mm Coolant system with automatic paper filter and magnetic separator automatische Abziehvorrichtung am Tisch montiert, ohne Diamant, mit automatischer Kompensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for electric cabinet Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH PRICE FOB TAIWAN Bwsb Hevxlkmjahtcjl * The exact configuration of the dresser must be clarified before ordering

Condition: used, Year of construction: 2001, x-travel 4200 mm y-travel 2750 mm z-travel 1650 mm control Fidia C20 total power requirement kW weight of the machine ca. 40 t dimensions of the machine ca. 9500 x 5900 x 6400 m • Traverse paths: Bwsboi Eqqme Hahtcel X axis approx. 4,200mm, Y axis approx. 2,750mm, Z axis approx 1,650mm, °C axis approx. +/-275° and A axis +95° / -120° • Fixture space: approx. 3,000mm x approx. 2,200mm x approx. 980mm • Table size: 3,000mm x 2,200mm with T-slots in a 150mm grid • Table load: 1,000kg / m² table surface • Working and rapid traverse speed: max. 20m/min • Machine dimensions: length approx. 9,500mm (without housing), width approx. 5,900mm, height approx. 6,400mm (Z axis extended) • Weight: approx. 40,000kg • Controller: Fidia C20 • Spindle: HSK 63 from Fischer (Switzerland), 24,000 rpm (grease lubricated) • Spindle hours: 6,939 hours (as of 05/16/22) • Total hours: 76,793 hours (as of 05/16/22) • Tool changer: 2 tool magazines with 30 tool places each, max. Tool weight 4kg, max. tool diameter 80mm or Ø125mm if no two sister tool places, max. tool length 280mm cover plate pneumatic • Cooling: tool spray device with a container of 19.5 l, spray head with adjustable output 0.04 - max. 2.3l/h • Tool control: Blum Laser • Wireless probe: Manufacturer M&H, type 25.10, year of manufacture 2021 • Exchange ball screw X - axis 10.07.2018. • Telescope cover replaced on February 26, 2019 on one side.