Used Towerlight Superlight Vt1 Al for sale (135,522)

Condition: used, Year of construction: 2006, Functionality: fully functional, Ideal 7228-06 Paper Cutting Machine - Hydraulic clamping - Air table - Side additional tables - Safety light barrier - 2 blades Crsb E H Tyewf Hkas Seb Cutting length in mm: 720 Insertion height in mm: 80 Insertion depth in mm: 720 Remaining cut in mm: 20/90 (with press bar cover) Dimensions (HxWxD) in mm: 1335 x 1305 x 1510 Weight in kg: 620

Condition: excellent (used), Year of manufacture: 2007 Serial number: 10191 Pressure: 150 tons Bending length: 3100 mm Maximum stroke: 260 mm Working pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Crsb E H Tyowczxae Seb Machine weight: 10,000 kg Damaged drive plate

Condition: used, Year of construction: 2004, operating hours: 13,419 h, power: 409 kW (556.08 HP), fuel type: diesel, Drive: Track Empty weight: 23.500 kg Track width: 75 cm Crjb E H Tyswg Dqgj Sob Technical inspection expiration date: 2025 Auction item. Tractor in working condition. Front wheels replaced. Engine head restored 3 years ago. Gearbox repaired 5 years ago. Hydraulic accumulators filled for track tension. Sold as seen in photos and video.

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine type PMS 11-4 G3 in 3-phase direct current design Ceb E Heh N Sc Ej Ty Sjrb - Specially designed for welding aluminum sheets - Barely used, fully checked and cleaned - Everything works, ready for demonstration - Rated voltage 400V/50Hz - Rated power 96kVA - Welding current 23kA - Connection cable cross-section 10mm²/phase - Fuse 63A - Throat 1050mm (!!) - Electrode arm diameter 60mm - Electrode holder diameter 30mm - Electrode force 600daN - Stroke 65+25mm - Electrode cone MK2 - MPS 8043/1 control system from Harms & Wende with current ramp and pulses - With operating instructions - 2-stage foot switch in accordance with accident prevention regulations - Machine main switch - Pneumatic Maintenance unit - Weight approx. 830 kg - Complete documentation including circuit diagram, compressed air diagram, and cooling water circuit is included - VAT deductible On-site commissioning is subject to a fee and billed based on time and effort. The system is located in Dresden, near the A17 motorway, and can be inspected and demonstrated by appointment.

Condition: excellent (used), bore capacity in steel (diameter) 45 mm throat 300 mm bore stroke 160 mm taper MK 4 table surface area 600 x 500 mm table adjustable 550 mm total power requirement 0,8 kW Csb E H Tyovn U Ume Sorb weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 9911832, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, spindle nose: HSK F63, tool length: 150 mm, tool diameter: 20 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, The MECAL MC302 GEOS-5 5-OSI machining center, manufactured in 2014 in Italy, is designed for milling, drilling, threading and cutting profiles made of aluminum alloys, plastics and steel. The machine, equipped with high-end components and innovative solutions, performs machining both on a single working field and inside 2 separate working zones, which translates into a significant increase in the speed and efficiency of the production process. Simultaneous machining on two work zones is possible through the use of a longitudinal work area with a sliding machining station and a chip conveyor. Csb E Heu Dl R Uo Ty Ssrb The MECAL machining center for aluminum profiles achieves high structural rigidity, thanks to a base made of quality steel tubes. During machining, the profile is held by special clamps with an independent power system, allowing positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guides. The MECAL GEOS-5 machining center is offered with 3D software, providing a high level of programming flexibility, user-friendly operation and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile milling machine - number of axes : 5 (X,Y,Z,A,C) - feed rate in Y/Z axis : 1570/740 mm - spindle tilt in A axis : ± 120° - spindle rotation in C axis : ± 210° - accelerated feeds in X/Y/Z axis : 70/60/40 m/1 - 3D graphics software - tool storage capacity : 18 - maximum electro-spindle speed : 24000 rpm - power of electro-spindle : 12 kW - maximum blade diameter : 500 mm - maximum diameter of side and face milling cutter : 200 mm - central lubrication

Condition: excellent (used), Year of construction: 2017, operating hours: 700 h, Functionality: unexamined, Control Cabinet with a large number of soft starters and switch gear and 15 inch HMI Cob E Hswb Unfo Ty Serb

Condition: excellent (used), Year of manufacture: 2004 Crsbowczwvo E H Ty Seb Serial number: 7586 Pressure: 120 tons Bending length: 3100 mm Maximum stroke: 225 mm Working pressure: 240 bar Motor power: 11 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: 7,500 kg

Condition: used, power: 162 kW (220.26 HP), fuel type: diesel, Year of construction: 1999, operating hours: 22,842 h, Field of application: Construction Empty weight: 19.700 kg Auction item. Front loader with defects. Front axle does not work, may have other defects. Without batteries. Cobowg Dicj E H Ty Sorb Sold as seen in the photos.

Condition: excellent (used), Used heatable/coolable agitator tank with anchor agitator Type: CILC3000TPRWA Item number: 10865 Last intended use: Food Volume: Approx. 3150L Crjb E Hjwfnpqo Ty Sjb Type: Upright design on four height-adjustable feet Design: Min. 2mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Internal weld seams: Ground Operating pressure: Atmospheric Thermoplate operating pressure: Max. 1.8 bar Operating temperature: Max. +95°C Top plate: Central cross member with two hinged lid halves Bottom plate: Conical bottom with central outlet Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2700mm Feet height: 580mm Equipment: -Thermoplate (double jacket) for heating/cooling, H=1000mm, around the cylinder. Part of the tank, inlet/outlet connection 3/4" nipple, max. operating pressure 1.8 bar -Thermoplate (double jacket) for heating/cooling on the bottom of the tank, inlet/outlet connection 3/4" nipple, max. operating pressure 1.8 bar -1x hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in a 90° open position) -2x metal grates below the hinged lid as anti-soap protection, screwed, removable -Cross braces welded between the feet -1x agitator flange connection -1x spare connection DN50 DIN11851 on the top plate with blind cap -Outlet DN50 DIN11851 Handle extends to the front, adapter shaft, guide plate -1x nameplate Agitator: Anchor agitator Max. viscosity: 20,000 mPas Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTFGH/1.5-10 Power: 1.5 kW Speed: 0-11 rpm Operating voltage: 3PH 400 V Material in contact with product: 1.4301 stainless steel -Motor and gearbox manufactured by Getriebebau NORD -Gearbox with food-grade oil filling -Solid agitator shaft with double bearings in the gearbox -Agitator shaft balanced for smooth running across the speed range -Anchor agitator made of 60x60 square tube, welded design -Stainless steel flange with EPDM V-ring seal Agitator control: CEE plug-in switch on the tank with on/off switch, phase inverter, zero-voltage release, and emergency stop, pre-wired Continuous speed control of the agitator motor via a compact, external frequency converter, manufactured by Optidrive Operating voltage: 3PH 400V

Condition: reconditioned (used), Year of construction: 1990, Special construction decanter for area were explosion proof requirements are a special demand , decanter equipped with sistem for inert gas who prevent explosions , flat cone decanter +clarifier GEA WESTFALIA SA 20 gas tight separator ATEX 11KW 6500 RPM Cob E H Tyjv Tu Scs Serb 30 kw main drive , hidraulic back drive 7.5kw oil pump , 4000 rpm , 15mc/h decanter remove down to 10 microns solids from liquids , clarifier separator will remove down to 0.2 microns complete sistem available with separator with the same settings Explosion proof motor and sistem

Condition: new, - Electric motor height and swivel adjustment 0 - 46° for the main saw blade - Digital swivel angle display - Saw blade projection max. 150 mm, saw blade diameter max. 450 mm - Double roller carriage, carriage length 3000 mm including stepless upper carriage lock - Parallel stop manual adjustment, adjustable via measuring scale, including fine adjustment, cutting width 1000 mm - Angle stop with fixed 90° position, manually adjustable via measuring scale up to 3200 mm - Drive motor 4 kW (5.5 HP) with 1 speed 4000 rpm - Tool clamping system AKE for the main saw blade Item no. M19308 - including surcharge for motor 5.5 kW (7.5 HP), 3 speeds Crsbevyurio E H Ty Seb

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, spindle speed (max.): 750 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 640 mm, type of input current: three-phase, grinding wheel diameter: 150 mm, overall weight: 4,500 kg, grinding spindle speed: 10,500 rpm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, grinding spindle motor power: 7 W, workpiece diameter (max.): 320 mm, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2025, More details to come Cjb E Hswbpuyj Ty Serb

Condition: excellent (used), Year of production: 2007 Serial number: 10666 Pressure: 150 tons Bending length: 3100 mm Maximum stroke: 260 mm Creb E H Tyjwczwcj Sob Working pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Machine weight: 10,000 kg With accessories

Condition: used, ALTO Encore L 2426 Shower suction machine / 24 VDC / 75A / IPX 3 / Weight 395 kg Cob Eeg Ngmxj H Ty Serb

Condition: used, Year of construction: 1993, Used, good condition Make: Altendorf Csb Eswf Epho H Ty Sjrb Type F45 Year of manufacture: 1993 Machine no. 93-2-88 GS-tested GS-tested for wood dust Heavy-duty motor: 7.5 kW Carriage length: approx. 2800 mm Cutting width: approx. 1250 mm Max. blade diameter: 450 mm Pivoting angle: up to 45° Tabletop extension: approx. 840 mm Height adjustment: hydraulic Pivoting adjustment: hydraulic Miter stop Extraction connection: diameter 120 mm / 80 mm Space requirement: approx. 2800 mm x 1900 mm x 1400 mm Total connected load: approx. 7.5 kW Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: used, Dalex Works Pms 10-2 380V 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Crobeg Rcpxe E H Ty Sob Machine weight 341 kg

Condition: good (used), Kaltenbach cold circular saw KKS Maschnr.6995Saegeblatt Ø 350 mm-speed 130 m/min-weight total 1200 kg Creb Eed Tp Nls H Ty Sjb

Condition: good (used), Aluca van racking Length 1750 mm Height 950 mm Depth 330 mm 1 piece Length 1210 mm Height 950 mm Depth 400 mm Cob E H Tyou Daqpo Ssrb Condition see pictures

Year of construction: 1970, Condition: used, Spot welding machine Make Dalex Crob E H Tyjk Tt Hfo Seb type SF 16 Continuous power 16 KVA at 50 % ED

Condition: excellent (used), Schmalenberger Z32-16 centrifugal pump / coolant pump Cobsq I N Htj E H Ty Ssrb

Condition: good (used), Year of construction: 1994, Spaleck vibratory finishing machine type AV 125 with additional enclosure with sound insulation Crob E Heugv Uys Ty Seb

Year of construction: 1969, Condition: used, Swivel bending machine Albert steel TYpABK 400 /5 useful length 2530 mm Csb Esh Rkh Do H Ty Sorb Sheet thickness 5 mm

Year of construction: 1990, Condition: used, Weigl ER - 1500 Brief description: Start hole eroding machines Waldmann & Description: Immediately available from site : Start hole eroding machines Waldmann & Weigl Type ER - 1500 Year of manufacture 1990 table size 500 x 500 mm installation height 400 mm twist drill 0,1 - 20 mm taps M 2 - M 20 electrodes 1 - 12 mm drilling machine Interkrenn Economy 280 S height adjustment 700 mm throat 180 mm quill stroke 80 mm speed range 120 - 2580 rpm Cjb E H Tyjnzh Ivj Serb Tool holder MK 2

Year of construction: 1970, Condition: used, Metal circular saw KKS 350 Crobohrzahs E H Ty Ssb Blade diameter 350 mm