Used Towerlight Superlight Vt1 Al for sale (135,576)

Year of construction: 2022, Condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, suction nozzle Ø: 1 x 100 / 50 mm each, Cjlq H Sgoihahme Regt weight: 450 kg Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg - free on truck - - immediately available -

Condition: ready for operation (used), Condition Used Stock Number 47543 This listing is for 1 of 2 Thermo Scientific Sorvall RC12BP+ Floor Centrifuge Sorvall RC 12BP Plus Centrifuge System specifications: Centrifuge Specifications Maximum speed: 4,700 rpm Maximum RCF: 7,340 xg Maximum capacity: 12 L, 6 x 2000 mL Nalgene Bio-bottles, 12-500 mL quad blood bags Drive: High-performance induction Imbalance detector: 50 gram tolerance Accel/decel profiles: 11 Run time: 1 min. - 99 min 59 sec., continuous operation Temperature control range: -10 to +40 °C Dimensions (H x W x D): 1178 x 800 x 905 mm (46.3 x 31.5 x 35.6 in) Weight 470 kg (1,036 lbs) Control: Microprocessor Programmability: 15 programs Functions: Centri-Log traceability software, ACE, Step-mode runs, slow start/stop Safety features:  Automatic lid lock, imbalance detection, armored guard ring, security key switch  Cjlq Hsuz I E As Sg Rsgt

Condition: good (used), Technical specifications for the pallet racking system: Rack system: SSI Schäfer Type: PR 600 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 17,040 mm Number of bays per rack row: 6 Number of levels plus floor level: 6 Technical data for volume: Pallet spaces per bay: 21 Number of pallet spaces per row: 189 Total number of pallet spaces: 189 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 1,100 kg Scope of delivery includes: 10x pallet rack uprights, used Cgolqjwax Iye H Sg Ret Material color: Sendzimir galvanized Upright type: P217 Profile dimensions: 120 x 100 x 3.00 mm Incl. cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (screwed framework) Height: 12,000 mm Depth: 1,050 mm 108x pallet rack crossbeams, used Material color: RAL 5010 Gentian Blue Box profile: 160 x 50 mm Crossbeam type: TRV1-270-160-30 CE Clear width: 2,700 mm Hooks: 5 HK (hooks) Max. load per pair of crossbeams: 3,400 kg, with evenly distributed load Note: The functionality of the trusses is guaranteed despite the holes. SSI project with heat shields that were screwed in according to the manufacturer's instructions! 216x locking pins, used Material color: Sendzimir galvanized To secure the longitudinal beams against accidental lifting 40x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Version: Carbon steel, galvanized Approved for: Cracked concrete 20x leveling plates, used Version: complete Galvanized for leveling shelf supports that are installed on uneven floors 1x Load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2010, Functionality: fully functional, feed rate X-axis: 100 m/min, working width: 310 mm, planing height: 150 mm, planing width: 310 mm, total height: 300 mm, overall weight: 7,000 kg, 4-sided lamellar planing machine Kälin type Industry The machine is located in Austria in AT-6870 Reuthe Colq Hevkpi Do Sg Rogt

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: A04B-0326-B001#D5, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, type of input current: three-phase, net weight: 3,000 kg, Equipment: documentation/manual, fridge, For Sale: Fanuc Robocut Alpha C600iA Wire EDM Machine with 6th Axis and i-Link Software – Excellent Condition,10.000 working hours. We are offering our Fanuc Robocut Alpha C600iA wire EDM machine, perfect for highly precise machining of metals and other conductive materials. This machine is equipped with a special rotating 6th axis for complex and multi-sided machining, and comes complete with i-Link software for advanced machine connectivity and process optimization. Specifications: Model: Fanuc Robocut Alpha C600iA Year of Manufacture: 2013 Maximum Workpiece Dimensions: [e.g., 1050 x 820 x 300 mm] Maximum Z-axis Travel: [e.g., 310 mm] Table Size: [e.g., 840 x 640 mm] Cutting stroke: X600mm, Y400mm, U200mm, V200mm, Z310mm and B Continue 360degr (6th axis rotary axis). Wire Diameter Range: 0.1 – 0.3 mm Control Unit: FANUC Robocut CNC Celq H Sgswfxzkj Rogt Automatic Wire Feeding (AWF): Yes 6th Axis: Rotating axis for complex 3D and multi-axis machining Software: Includes Fanuc i-Link software package Accessories: Water cooling system, filters, full documentation, and various additional items Machine is fully operational and available for live demonstration. Very clean and ready for immediate use. Highlights: Extremely precise machining 6-axis machining capability Efficient production with i-Link integration Reliable Japanese quality Easy and fast programming Price: 39.500Euro (including 6th axis, rotary axis, 40K newprice) Location: Tongeren Belgium Interested? Feel free to contact us for more information, additional photos, or to schedule a viewing!

Condition: used, Functionality: fully functional, machine/vehicle number: B11400839, Year of construction: 2018, operating hours: 16,500 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, mast type: telescopic, construction height: 4,600 mm, power: 265 kW (360.30 HP), total length: 11,200 mm, engine type: 6 Cyl. Volvo TAD1171VE, drive type: Diesel, construction width: 4,150 mm, net weight: 68,620 kg, Full Container Reach Stacker VIN: B11400839 Mast Type: Telescopic Transmission: ZF5WG261 Condition: Reconditioned without warranty Technical Condition: Good Front Tire Type: Pneumatic Cgjlq H Sovcgadsg Rjt Front Tire Size: 18.00-25 Front Tire Condition: 60-80% Rear Tire Type: Pneumatic Rear Tire Size: 18.00-25 Rear Tire Condition: 40-60% Sideshift, Heating, Full Cab, Air Conditioning, Movable Cab Central Lubrication Camera

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW Cgslqjdx R Tfj H Sg Rjt - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: used, USA/M5142, Alloy Products pressure vessel 12.7 bar 38°C Model: USA/M5142 Type: USA/M5142 Cgelq Heq S Tp Is Sg Rjt Condition: Used

Condition: good (used), Technical specifications for the pallet racking system: Rack system: SSI Schäfer Type: PR 600 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 17,040 mm Number of bays per rack row: 6 Number of levels plus floor level: 6 Technical data for volume: Pallet spaces per bay: 21 Number of pallet spaces per row: 126 Total number of pallet spaces: 126 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 1,100 kg Scope of delivery includes: 7x pallet rack uprights, used Material color: Sendzimir galvanized Upright type: P217 Profile dimensions: 120 x 100 x 3.00 mm Incl. cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (screwed framework) Height: 12,000 mm Depth: 1,100 mm 72x pallet rack crossbeams, used Material color: RAL 5010 Gentian Blue Box profile: 120 x 50 mm Crossbeam type: TRV1-270-125-30 CE Clear width: 2,700 mm Hooks: 5 HK (hooks) Max. load per pair of crossbeams: 3,300 kg with evenly distributed load Note: The functionality of the trusses is guaranteed despite the holes. SSI project with heat shields that were screwed in according to the manufacturer's instructions! 144x locking pins, used Material color: Sendzimir galvanized To secure the longitudinal beams against accidental lifting 28x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x leveling plates, used Design: Complete Galvanized for leveling shelf supports that are installed on uneven floors 1x Load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Cgeljwaw H Isq H Sg Rst Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), machine/vehicle number: 2678, Year of construction: 2007, lifting height: 3,630 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 1,800 mm, total length: 5,530 mm, total width: 3,070 mm, operation weight: 33,400 kg, engine type: Diesel, lifting capacity: 20,000 kg, additional equipment features: Rear mud guards, Warning triangle, Centralized greasing system, Dual tread, Front mud guards, Equipment: lighting, Kalmar DCD200-12LB from Uniktruck Cgolq Hoquwk Tj Sg Ret

Condition: new, Year of construction: 2025, Functionality: fully functional, cutting height (max.): 1,000 mm, cutting width (max.): 1,000 mm, cutting length (max.): 10,000 mm, power: 23.8 kW (32.36 HP), saw blade diameter: 700 mm, overall weight: 3,800 kg, Equipment: motor brake, The horisontal circular saw mill is designed for the production of radial sawn edged boards and beams from coniferous and hardwood logs by longitudinal sawing with two circular saws in both directions (without idling) at an angle of 90 °. Cjlq H Sov D Rwveg Rjgt Sawing is performing by movable carriage which is running alongside a fixed log. The log sawing scheme is chosen by the operator individually, based on the shift task and rational log cutting optimization, depending on its diameter. DISTINCTIVE FEATURES: - No need for logs sorting; - Individual sawing scheme for each log; - The possibility of sawing logs with a diameter of 150 to 1000 mm; - Efficient output up to 70%; - High productivity – up to 20 m³/shift (counting by raw roundwood). SPECIFICATION: Dimensions (for a cutting length of 6 m): Length: 3320 mm Width: 2220 mmHight: 2130 mm Track length: 13380 mm Cutting parameters: Max. log diameter: 1000 mm Min.log length: 2000 mm Max. dimension of the cut element: 200 x 200 mm (possibility of increasing the dimension 270x240) Circular saw diameter: 450 - 700 mm Motors: Main motors power x2: 12 - 23,8 kW Shaft rotation speed: 1400 rpm Feeding system Feeding motor power: 1,5 kW Feeding motor rotational speed: 1450 rpm Feeding speed: 0-30 m / min *Using saws with a diameter of ø 450 mm, we can get a size max. 150x150 mm, with a saws with a diameter of 550 mm we get max. 200x200 mm, and in the version with a saw ø 630 we get a size of 240x240 mm., With a saw ø 700 the get an ability to increase the size to 270x240.

Year of construction: 2006, Condition: ready for operation (used), Complete line for producing slats With conveyor belts and chain transport systems. Sicar mv500 multi-blade sawing machine (2001) planing width 50 cm and 37 kw motor Jansen chain transport double cross line 4 meters Conveyor belt 6 meters and 60 cm wide Powered roller conveyor 6 meters long and 60 cm wide Powered roller conveyor 6 meters long and 25 cm wide Savador supet cut 500 automatic cross-cut saw with feed belt 4 meters with casing (2006) Outfeed belt 8.5 meters long and 30 cm wide with 6 pneumatic cross-ejectors Celq H Sjv Exfwjg Regt Everything in 1x, from plank to slat to size

Condition: new, Year of construction: 2025, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Cjlqoi Amnpe H Sg Rsgt Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Condition: used, Drue 13000 / Drue13000, Michael Riedel Transformatorenbau GmbH Three-phase transformer 13kVa Cgslq Hoq S Trme Sg Rot Model: Drue 13000 Condition: Used

Condition: used, Manufacturer: ALSTHOM Model: NUA 160 h Machine type: Milling machine (specific details not available) Rotation speed: 1440 rpm Frequency: 50 Hz Voltage: 220/380 V Motor power: 7.5 kW Current: 27 A / 15.5 A Cgjlq Hsupkixs Sg Rjt

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch Cgolq H Sog U Uv Reg Rst When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, ZAB0-0100-0013, MC002X2_42, Applied Materials E-motor Passive Part Rev.0 - New Model: ZAB0-0100-0013 Type: MC002X2_42 Condition: New Colsq S Th Seq H Sg Rjgt

Condition: new, Year of construction: 2025, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Celjd Hx Uqsq H Sg Rjgt

Condition: used, ATP2300M ED:06, 112745 ED:C, Alcatel Annecy Adixen turbo pump with controller Cgolq Heq S Tmwe Sg Ret Model: ATP2300M Type: Adixen Condition: Used

Condition: used, 112745 ED:C, ATP2300M ED:07, Alcatel Annecy Adixen turbo pump with controller Cgelq H Soq S Tmtog Rot Model: ATP2300M Type: Adixen Condition: Used

Condition: new, 0270-0271, Applied Materials Universal Lifting Handle Endura Attachment - New Model: 0270-02710 Cjlq H Sgeq S Sd Nj Rogt Condition: New

Condition: new, 70099689, cetisPV-XF-Tube-ZBO / cetisPV XF Tube ZBO / cetisPVXFTubeZBO, h.a.l.m. elektronik GmbH Xenon flash lamp Cetis PV-XF2 - New Model: 70099689 Type: cetisPV-XF-Tube-ZBO Condition: New Colq H Sgjq S T U Te Rjgt

Condition: used, cetisPV-XF2-P / cetisPV XF2 P / cetisPVXF2P, Power Unit U07 / PowerUnitU07, h.a.l.m. elektronik GmbH Xenon flasher power supply Model: cetisPV-XF2-P Type: Power Unit U07 Celq Hoq S T D Rs Sg Rjgt Condition: Used

Condition: new, 0270, Applied Materials Wafer Calibration Tool 4mm - New Model: 0270-03972 Cgolq H Sjq S Sckjg Ret Condition: New

Condition: used, 0200-04017, 11028573, Applied Materials ring 300mm ESC CU - Refurbished Cgeloq S Sd Tsq H Sg Rot Model: 0200-04017 Condition: Refurbished