Used Glob-Ram Rm115 for sale (3,455)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Dodpozv Rc Sefx Agtjkt Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Year of construction: 1995, condition: excellent (used), REIFENHÄUSER RAM 160 PIPE HITCH - 6 Caterpillars Year of manufacture: Approx. 1990 Caterpillars: 6 Diameter: Min. 30 mm, Max. 160 mm Haul-off speed: 0.2 - 10 m/min With central chain lubrication Renewed gear motor and frequency converter With remote control and approx. 10 m cable Condition: Very good, ready for operation The haul-off is my property We speak Spanish We speak French We speak English Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany Dsdpewq E Etsfx Agtjkt

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 010199, input voltage: 220 V, height adjustment type: electric, total length: 4,820 mm, overall weight: 5,000 kg, total width: 3,760 mm, total height: 2,395 mm, control cabinet height: 1,627 mm, control cabinet length: 550 mm, control cabinet width: 550 mm, electrical fuse: 10 A, input frequency: 50 Hz, For sale: CNC Foam Cutting Machine - RAM SLC 499 SUPERFAST. Year of manufacture: 2006. Regularly serviced and fully operational. The machine is in continuous use – testing on site is possible. Cutting dimensions: a-2200 c-2200 h-1300 Dodpsyaxrkjfx Agtekt Transport to your specified address can be arranged. For more information, please contact by phone only: 508388091

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Dedpfx Agjztaufetskt

Condition: used, Year of construction: 1975, machine/vehicle number: 71879, Hyraulik press 51x Kunstoffplatten Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 250x90x130 cm Distance between first plate and spindle approx ca. 90cm Dkodezzpfpjpfx Agtst

Condition: good (used), Year of construction: 2003, operating hours: 8,500 h, functionality: fully functional, Brückner RAM + SETEX Dedpfx Aezphgnjgtjkt

Condition: excellent (used), Year of construction: 1988, total width: 810 mm, total length: 1,700 mm, total height: 1,700 mm, overall weight: 1,250 kg, Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 Dodpszzmtkofx Agtekt FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 300 / 600Min. Maximum sheet thickness:4.0mm Horizontal troath: 460mm Vertical troath: 475mm Max. thickness Stainles:2.0mm Max. thickness Aluminium:5.0mm Motorised ram adjustment:0 - 60 Power: 3.0kW Length: 1700mm Width: 810mm Height: 1700mm Weight: 1250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Dkjdszlgf Ispfx Agtjt Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Dkjdszmu I Hjpfx Agtet Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: used, Year of construction: 2012, operating hours: 3,652 h, Equipment: ABS, all wheel drive, KRAMER ALL-WHEEL DRIVE 950 – DEUTZ ENGINE – HYDRAULIC QUICK COUPLER – PALLET FORK – 6,500 KG – ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * 3,652 OPERATING HOURS * 2012 YEAR OF MANUFACTURE * DEUTZ ENGINE * 58 KW * PERMISSIBLE TOTAL WEIGHT: 6,500 KG * PALLET FORK * HYDRAULIC QUICK COUPLER * TIRE SIZE: 14.5-20 Djdpfx Ajzzg Twegtjkt * GOOD TIRES EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES, AND 17-21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are exclusively subject to our general terms and conditions – see website. Important note – important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Dkjdpfx Aszy Eg Hogtot Weight: approx 9 T

Condition: good (used), Year of construction: 2015, Ram K60D Planetary mixer Serial: 15099 Dkedew Ulbnjpfx Agtet 2015, 60L stainless bowl, with beater attachment, with adjustable timer and speed controls, safety guard, 3Ph

Condition: used, Kieselgur-Frame 600x600 stainless steel Material: AISI 304 suitable for Seitz Orion A60 and B60 Dsdpfx Aszzpbdogtjkt 40mm complete with 2 plastic shoes gaskets optional Manufacturer part number: Fs 60485

Condition: used, Year of construction: 2009, machine/vehicle number: 181056804, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on site for loading. Dkedpfjzy Uknox Agtet For sale is a CNC lathe manufactured by WEISSER, model: Univertor AM-T. TECHNICAL DETAILS Three-phase operating voltage: 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Magnet voltage: 24 V DC Rated machine current: 99 A Main circuit breaker: 160 A, slow-blow

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 5.5 kW (7.48 HP), pressing force: 80 t, stroke length: 150 mm, total length: 3,180 mm, total width: 1,250 mm, total height: 2,450 mm, overall weight: 6,000 kg, Equipment: documentation/manual, Accessories: 3 x bending prism, 3 x top beam, several bending segments, backstop, stroke counter, manual night operation. Technical parameters: Rated force 800 kN, Working table length 2500 mm, Table width 160 mm, Ram speed: downward 50 mm/s, pressing 10 mm/s, upward 100 mm/s, Maximum ram stroke Z 150 mm, Distance between side frames B 2050 mm, Overhang A 250 mm, Maximum opening height H 380 mm, Parallel ram stroke accuracy 0.1/1000 mm, Working fluid pressure 24 MPa, Electric motor power: main 5.5 kW, Machine dimensions: length (with cabinet) 3180 mm, width 1250 mm, height 2450 mm, Machine weight 6000 kg. The machine can be tested in our warehouse in Přerov by arrangement. Dkjdpjzzffrsfx Agtst

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 10 m/min, feed length W-axis: 800 mm, spindle diameter: 150 mm, table load: 20,000 kg, workpiece weight (max.): 20,000 kg, Travel X-axis – Longitudinal column: 8,000 mm Y-axis – Vertical: 2,500 mm Z-axis – Ram extension: 1,000 mm W-axis – Spindle extension: 800 mm Headstock Spindle diameter: 150 mm Revolutions: 2,500 rpm Power: 40 kW Ram section: 460x520 mm Rapid traverse X and Y axes: 20 m/min Z-axis: 10 m/min MG 20 rotary table Table dimensions: 1,600x2,000 mm Dodpfxozqlgzj Agtjkt Longitudinal movement, travel: 1,500 mm Maximum centered load capacity: 20 tons Accessories Automatic indexing headstock 1ºx1º (Power 37 kW) Heidenhain measuring scales on all axes Operator platform Chip conveyor Floor plates (2 units)

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Dedpjzx S E Tsfx Agtjkt Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, MECOF MASTERMILL HPC3 X: 4000 MM Y: 1600 MM Z (VERTICAL): 3000 MM RAM SECTION: 500 X 500 ROTARY TABLE: 2000 X 2500 - TRAVEL 1500 MM - CAPACITY 30 TONS SPINDLE SPEED: 6000 RPM TOOL CHANGER: 80 POSITIONS Djdpozzp Dxofx Agtekt HEAD: BI-ROTATIVE HEAD WITH AUTOMATIC MILLIMETER-ACCURATE POSITIONING HIGH INTERNAL SPINDLE PRESSURE - RENISHAW FOR TOOL MEASUREMENT CNC: HEIDENHAIN TNC 530i

Condition: used, Year of construction: 1963, total length: 2,300 mm, total width: 1,500 mm, total height: 2,880 mm, Empty weight: 8.000 kg - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: 12691 - Drive system: Conventional - Press force [ton]: 160 - Min. stroke [mm]: 25 - Max. stroke [mm]: 118 - Table length [mm]: 950 - Table width [mm]: 650 Dsdpfxewmfrro Agtokt - Ram width [mm]: 340 - Height adjustment [mm]: 75 - Motor power: 7.5kW - Transport dimensions: 2300mm x 1500mm x 2880mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1992, Second-hand machine Year of manufacture: 1992 Features and technical specifications: Electrically and oil-hydraulically controlled frame press Pressure up to 1,200 kg Two movable longitudinal pressure beams are mounted on double ball bearings and guide rails These rails allow for continuous height adjustment of the cylinders The press cylinders are adjusted using a quick-adjustment pressure lever with self-locking mechanism Two electric-hydraulic control valves (with 3 operating stages) are operated by hand levers This allows you to press with precision and assemble even the most complex frame constructions Working height x working length: 2000 x 3000 mm with 3 vertical pressure cylinders Dsdszk Nl Uopfx Agtokt with 2 horizontal pressure cylinders Pressure cylinder stroke 120 mm Three-phase motor 1.3 kW Pressure control unit/press pressure adjustable 0–60 atü Dimensions: 3950 x 900 x 2550 mm Weight approx. 620 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2016, functionality: fully functional, Beckhoff Automation Package – C5102, CP2712, AX5203, CX5020, EtherCAT I/O & TwinSAFE Description For sale is a high-quality Beckhoff automation package from an industrial production facility (year of manufacture 2016). All components come from the same system and were operated together until professionally dismantled. This package is ideal as a spare parts stock, for expanding existing Beckhoff systems, or for rebuilding an EtherCAT controller. Scope of delivery (see numbering in the photos): No. 1 – Beckhoff C5102 Industrial PC Intel Core i7-3610QE 8 GB DDR3 RAM 1 TB SATA hard drive Windows 7 Embedded Year of manufacture 2016 No. 2 – Beckhoff CP2712-1002 Panel PC / Touch Panel 12.1" touchscreen Intel Celeron 1.46 GHz 4 GB RAM Windows 7 Embedded Year of manufacture 2016 No. 3 – Beckhoff AX5203-0000-0200 2-axis servo amplifier EtherCAT 2-axis version Year of manufacture 2016 No. 4 – Beckhoff CX5020 Embedded PC with EtherCAT I/O and TwinSAFE station Beckhoff CX5020 Embedded PC Beckhoff EK1122 EtherCAT Junction Beckhoff EL6900 TwinSAFE Logic Several TwinSAFE modules (including EL1904) Several digital Beckhoff EtherCAT input and output modules Completely assembled EtherCAT I/O station with a total of 24 Beckhoff modules The complete package is preferably sold as a set. Total price: €6,490 (negotiable) Individual components can also be sold separately after consultation. Recommended prices for individual sale: Dkjdpfezrgw Rjx Agtot No. 1 – Beckhoff C5102 Industrial PC: €1,990 (negotiable) No. 2 – Beckhoff CP2712 Panel PC: €1,490 (negotiable) No. 3 – Beckhoff AX5203 Servo Amplifier: €1,490 (negotiable) No. 4 – Beckhoff CX5020 EtherCAT/TwinSAFE Station: €2,790 (negotiable)

Condition: ready for operation (used), Siemens Teleperm M 6DS1837-8EA Ram memory module E Stand 2 SN CO960610 used 100% functional Dkodpfxezzh Hfj Agtet

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Dkedpfszk Nkdox Agtet Features and technical specifications: Electro-hydraulic drive Vertical press cylinders: 3 Vertical cylinder stroke: approx. 130 mm Vertical cylinders adjustable via a perforated grid Horizontal press cylinders: 2 Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Medium-pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The information provided is subject to change until the machine arrives at our warehouse. Availability: at short notice Location: 63934 Röllbach

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Djdjzzc Azjpfx Agtskt Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: used, Year of construction: 2022, For more information, please contact us via email or submit your inquiry. Dkjdjzwnqvspfx Agtjt