Used Tos Bph20 for sale (679)

Condition: good (used), Working area Maximum turning diameter 400 mm Maximum turning length 5000 mm Swinging diameter over bed 840 mm Fgedoy Ug U Dopfx Ammsg Swinging diameter over carriage 530 mm Spindle speed 14.6 – 1250 rpm Drive power 18.5 kW Dimensions 8.0 × 1.9 × 1.7 m Weight approx. 6.3 – 8.2 t

Condition: used, Technical details: grinding diameter: 250 mm grinding length: 1000 mm max. workpiece weight: 300 kg grinding wheel width: 150 mm Grinding wheel/diameter x bore x width: 600 x 305 x 80 mm folded disc width: 200 mm spindle taper: MK 5 tailstock taper MT: 5 sanding headstock rotation: 45° speeds:: 1050/1240 U/min longitudinal feed of the table: mind. 1 mm table speeds: 0,05-5 m/min traverse movement of the grinding headstock : 415 mm traverse movement of the grinding headstock with aut. infeed: 2 mm For grinding : 0,15 mm aut. infeed at table dead center: 0,005-0,05 mm for grinding : 0,0005-0,01 Self-infeed at grooving : 0,01-5 mm/min Fedpfx Amoyzptismjgg Quick adjustment of the grinding headstock : 60 mm grinding wheel motor: 19 kW total power requirement: 22 kW weight of the machine ca.: 5 t

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Fgsdpfx Amjmk E D Iomeg Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. Fodpexf Inkofx Ammjgg The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Year of construction: 1968, condition: ready for operation (used), A vertical large-format vertical turning lathe TOS is available. Turning diameter cross rail support/side support: 1150mm/1000mm, max. workpiece weight: 3000kg, max. workpiece height: 900mm, travel X/Y/Z: 500mm/500mm/750mm, table diameter: 1000mm, max. table torque: approx. 8800Nm, machine dimensions X/Y/Z: approx. 2600mm/2700mm/4000mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Expected to be available from Q3 2026. Fjdpfx Ajyifltemmjgg

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm Fjdpfev Hzqxsx Ammjgg - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,500 mm, grinding diameter: 400 mm, Technical data - grinding length [mm] - 1500 - grinding diameter [mm] - 400 - range of table speed [mm/min] - 0 - 10 - smallest table travel [mm] - 0,001 - taper in tailstock sleeve {Morse no.] - 5 - grinding wheel dimensions [mm] - 500x80x203 - power of grinding wheel drive motor [kW] - 11 - power of grinding wheel drive motor [kW] - 3,5 - overall dimensions [mm]: length - 6650 width - 2300 (without desktop) height - 1800 - weight of machine tool [kG] - 6900 - central lubrication system; - Mitsubishi control system; - movement of the grinding wheel headstock - application of ball screw and servo motor; - table travel - use of ball screw and servo motor; - headstock of the workpiece - use of a new motor along with stepless speed control controlled from the operator panel; Fjdpevga Ayjfx Ammegg - "electronic wheel" for precise raids in both servo X and Z axes, e.g., for set-up work; We also make machines with Siemens 828D or 840Dsl control. It is possible to make machines up to a grinding length of 2000 / 2500 / 3000 mm.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For businesses facing the next stage in their growth journey, there is now a unique opportunity to invest in a used AutoStore system with 15,600 bins and a total of 46 Red-Line robots. This comprehensive AutoStore system, integrated by Swisslog, combines high capacity, scalability, and proven performance in a package that rarely becomes available on the market. The system was installed in 2021 and is located in the USA, making it particularly suitable for companies with high order volumes, growth ambitions, or a need to consolidate warehouse flows. System Overview Fgjdjzc Hbljpfx Ammog Grid: Double-Double Dimensions: approx. 24.1 x 24.8 m Height: approx. 5.5 m Number of bins: approx. 15,600 Bin size: 600 x 400 x 330 mm Robots & Capacity 46 RedLine robots 39 charging stations Ports & Flow 3 Relay Ports 8 Conveyor Ports Costs for dismantling/assembly and integration are additional. We can assist in finding suitable integration partners among the various options available on the market. Contact us for a full specification and any other questions you may have.

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Fodpfx Ajzff A Eemmjgg Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: good (used), Tos Hostivar cylindrical grinding machine Type: 1U X-path: 900 mm bed: 900 x 140 mm Turning diameter bed: 260 mm Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Dimensions: 150x105x140 cm LxWxH Fgedjq H Ap Nopfx Ammog

Year of construction: 1983, condition: good (used), FGSV 32 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Parameters: Table 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Speed ​​range 35-1800 rpm. Fgedpsh Ir Rmofx Ammeg Distance between spindle and table 140 - 590 mm. Distance between spindle and column 120 - 520 mm. Max. table load 500 kg. Main engine power 11 kW. The demand for a power of 15 kW. Dimensions: Length X Width X Height: 2735 X 2425 X 2475 mm. Weight 4200 kg.

Condition: new, Year of construction: 2026, functionality: fully functional, center height: 250 mm, workpiece weight (max.): 750 kg, grinding length: 2,000 mm, grinding wheel diameter: 500 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill travel distance: 50 mm, workpiece weight between centers: 500 g, distance between centers: 2,200 mm, workpiece diameter between centers: 500 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, feed length Z-axis: 2,500 mm, grinding spindle speed: 1,400 rpm, overall weight: 8,000 kg, warranty duration: 24 months, workpiece spindle speed (max.): 560 rpm, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°) +10/- 30 Fgsdpfx Aopy A Iuemmog Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Wheelhead motor kW 11 Total power demand of machine kW 45 - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200

Condition: good (used), Planing working width, mm 510 Maximum height for double-sided planing, mm 200 Maximum height for four-sided planing, mm 150 Lower planing shaft with 4 knives, electric motor 5.5 kW Upper planing shaft with 4 knives, electric motor 7.5 kW Right spindle diameter 40 mm, electric motor 4 kW Left spindle diameter 40 mm, electric motor 4 kW Electric height/width adjustment Fsdpfsxvfwkex Ammjgg

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 50052, Year of manufacture: 1970 Serial number: 50 052 The machine was overhauled in 2007. GENERAL CHARACTERISTICS OF THE MACHINE The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks. The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time). Clamping Table: Dimensions of one table: 1,600 x 3,000 mm Total length of connected tables: 7,000 mm Clamping surface of connected tables: 6,500 mm Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs Table height from base: 900 mm Travel of one table: 3,000 mm (connected tables: 6,500 mm) Table feed rate: 20 – 2,000 mm/min Rapid traverse: 4,000 mm/min Gantry with height-adjustable crossbeam: Clearance between side columns: 2,020 mm Fedpfx Amoxxwy Asmsgg Crossbeam height adjustment: 110 - 1,685 mm Crossbeam feed rate: 1,450 mm/min VF 160 Horizontal Headstock: Taper: ISO 60 Motor power: 30 kW Speed range: 15 – 710 rpm Feed rate: 10 – 2,000 mm/min Number of speeds: 16 VF 120 Vertical Headstock: Taper: ISO 50 Motor power: 18 kW Speed range: 28 – 910 rpm Number of speeds: 16 Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

Condition: ready for operation (used), TOS milling machine FN 32, spindle taper SK 40, speed range 40–2000 rpm Fgedsyf Efhopfx Ammjg

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm Fodetv Iklspfx Ammegg throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: refurbished (used), CNC Heidenahin or Sinumerik Travel distance X-axis: up to 1,800mm Travel distance Y axis: up to 1,600mm Travel distance Z-axis: up to 1,250mm Table load: up to 5,000kg Spindle diameter: 105mm Spindle speed (max.): 3,300 rpm Table length: 1,400mm Table width: 1,600mm Travel distance W-axis: 630mm Fgedjr Hdqxopfx Ammog Optional: Automatic Tool Changer.....40 pos Coolant through spindle.....20 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe

Condition: ready for operation (used), Year of construction: 1983, operating hours: 8,529 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, The machine was modernised and overhauled in 2002! TECHNICAL DETAILS Working spindle diameter: 100 mm Spindle speed range: 1,800 rpm Taper: ISO 50 Spindle travel (W): 630 mm Travel X-axis: 1,200 mm Travel Y-axis: 1,120 mm Travel Z-axis: 950 mm Fedpfx Aoy Edgfommegg Table clamping surface: 1,000 mm x 1,120 mm Table load capacity: 3,000 kg MACHINE DETAILS Control system: HEIDENHAIN TNC426 Motors and drives: SIEMENS Operating hours (as displayed): Control system on-time: 37,038 h Machine operating time: 30,987 h Program run time: 8,529 h Spindle run time: 12,156 h EQUIPMENT Handwheel: HR410

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 2,500 rpm, number of axes: 5, This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Fedsyar D Hepfx Ammjgg • Rotary table clamping surface: 2200 x 1800 mm Extra Information Working spindle diameter: 130 mm Technical Specification Taper Size ISO 50

Condition: ready for operation (used), functionality: fully functional, power: 0.004 kW (0.01 HP), cutting height (max.): 250 mm, cutting width (max.): 450 mm, saw blade diameter: 400 mm, overall weight: 7,500 kg, Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm - max disc diameter: 400mm - max width of input material: 860mm - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + - saw shaft: + - pressure: + - 2 pulling shafts, metal pneumatically pressed: + * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW Fodsri Nvvspfx Ammjgg - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm - weight approx: 7500kg

Condition: good (used), Year of construction: 1980, TOS FNGJ 32 Milling Machine Year of manufacture: 1980 Equipped with Heidenhain TNC 135 control With accessories Table size: 800x400 mm Spindle speeds: 40–2000 rpm Fgedpfxox U Eb Aj Ammsg Longitudinal and cross feeds: 8–400 mm/min Vertical feeds: 4–200 mm/min Distance from horizontal spindle axis to table surface: 125–525 mm Distance from vertical head spindle axis to table surface: 58–458 mm X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 Fjdsxpudtopfx Ammogg - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm

Condition: new, Year of construction: 2025, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Fgsdpfx Amjwwt I Nemjg Length of bridge 357 mm Center high 250 mm Center distance 1000 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 2550 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Fsdpet Hkh Aofx Ammsgg

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm Fjdpfxelkgvbj Ammegg travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks