Used Tos Bph20 for sale (8,981)

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Spindle mount ISO 40 Quill stroke 100 mm Nsdpfow U Aahex Af Sslk Spindle speeds 63 – 3150 rpm Fixed table

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,500 mm, grinding diameter: 400 mm, Technical data - grinding length [mm] - 1500 - grinding diameter [mm] - 400 - range of table speed [mm/min] - 0 - 10 - smallest table travel [mm] - 0,001 - taper in tailstock sleeve {Morse no.] - 5 - grinding wheel dimensions [mm] - 500x80x203 - power of grinding wheel drive motor [kW] - 11 - power of grinding wheel drive motor [kW] - 3,5 - overall dimensions [mm]: length - 6650 width - 2300 (without desktop) height - 1800 - weight of machine tool [kG] - 6900 Njdpfovga Ayox Af Selk - central lubrication system; - Mitsubishi control system; - movement of the grinding wheel headstock - application of ball screw and servo motor; - table travel - use of ball screw and servo motor; - headstock of the workpiece - use of a new motor along with stepless speed control controlled from the operator panel; - "electronic wheel" for precise raids in both servo X and Z axes, e.g., for set-up work; We also make machines with Siemens 828D or 840Dsl control. It is possible to make machines up to a grinding length of 2000 / 2500 / 3000 mm.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Njdpfx Afjw Nmw Ho Selk Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Year of construction: 1988, condition: good (used), TOS SN 50 B (1988) Manufacturer: TOS Model: SN 50 B Year of manufacture: 1988 Type: Universal centre lathe Swing over bed: 500 mm Swing over cross slide: 270 mm Swing in gap: 700 mm Distance between centres: 1500 mm Bed width: 300 mm Spindle bore: 52 mm Spindle speed range: 22 – 2000 rpm Spindle nose: Camlock D1-6 Spindle motor power: 7.5 kW Longitudinal feed range: 0.04 – 2.24 mm/rev Nledpfx Afjxl Tt Se Ssk Cross feed range: 0.02 – 1.12 mm/rev Metric threads: 0.5 – 224 mm Inch threads: 56 – 0.25 TPI Module threads: 0.25 – 112 mm DP threads: 112 – 0.25 DP Tailstock quill diameter: 75 mm Tailstock quill travel: 160 mm Tailstock taper: Morse 5 Machine length: approx. 2800 mm Machine width: approx. 1100 mm Machine height: approx. 1300 mm Machine weight: approx. 2000 kg

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 Nlodpfx Afoxf Inkj Sjk with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: good (used), Year of construction: 1994, functionality: fully functional, planing width: 800 mm, height adjustment type: electric, overall weight: 1,600 kg, planing height: 200 mm, number of planer blades: 4, Equipment: motor brake, Year of manufacture: 1994 Planing width: 800 mm Maximum planing height: 200 mm Number of knives: 4 Minimum workpiece length: 500 mm Minimum planing height: 5 mm Speed: 4,500 rpm Table length: 1,100 mm Number of feed rollers: 1 Main motor: 11 kW Maximum feed: 32 m/min Infinitely variable feed: Yes Table rollers: Yes Digital thickness display: Yes Sectional pressure roller: Yes Electric height adjustment: Yes Cutter shaft: Centrifugal shaft Njdpfx Aewma N Ssf Selk Centrifugal shaft: Tersa Outfeed: Steel roller Total power: 16 kW Approx. weight: 1,600 kg Space required (length): 1.2 m Space required (width): 1.65 m Space required (height) : 1.8 m

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Njdpew Urirofx Af Selk

Year of construction: 1989, condition: excellent (used), machine/vehicle number: 0435532, MACHINE DATA Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Model FO-10 Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Min Module 1.5 Max diam. 1500mm Max Width 450mm From Z9 teeth until Z448 Main drive 12 Kw Weight 9800Kg Original color RAL 6017 Book operation – service Nledpfxsd R Ri Ue Af Ssk Dimensions L 3200 – W 1800 – H 2530 Full extra accessories – parts – all module cutters Ready to work without any expensive PRICE 70.000€

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Nlsdpfxow Iu Nhe Af Sjk Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: ready for operation (used), TOS Gear Hobbing Machine FO16 Maximum wheel diameter: 1,600 mm Gear width: 560 mm Njdpfx Ajxwl R Tsf Solk Maximum module: 16 Maximum workpiece weight: 7,000 kg Table surface area: 1,350 mm Turning speed range: 16–80 rpm Feeds – axial: 0.05–1.5 mm/min Feeds – radial: 0.25–6 mm/min Feeds – tangential: 0.13–4 mm/min Electrics – voltage/frequency: 380/50 V/Hz Total power requirement: 12 kW Machine weight approx.: 18.5 t Machine dimensions approx.: 4.3 x 2.0 x 3.2 m The machine includes one additional head, change gears, and arbors. Video of the machine under power available.

Condition: excellent (used), Year of construction: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Maximum feed force in the X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table dimensions: 1,000 × 14,000 mm Number of T-slots in the table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Njdjxdwkfjpfx Af Sjlk Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in the spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be provided by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Condition: excellent (used), Year of construction: 1976, Spindle diameter: 100mm Njdpfx Asxv Sbief Sslk Table: 1250x1250

Condition: ready for operation (used), Spindle bore: 60 mm Swing diameter over bed: 500 mm Center length: 1000 mm Nlodpfx Ajiqtzkof Ssk Dimensions: 3100x1400x1600mm

Condition: good (used), Year of construction: 1995, Planing width mm 220 Planing height mm 120 Number of spindles 5 Arrangement of spindles down / right / left / up / down Spindle speed max / min 6000 Electric height adjustment Max feed m / min 25 Nedehaxh Nepfx Af Solk

Condition: good (used), functionality: fully functional, 840mm x 3,500mm, swing over cross slide 530mm, spindle bore 82mm, 7,1-900 Rpm, 18,5Kw, steadys, 4-jaw plate, DRO. Nlsdpfxjxqxvvj Af Sjk

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed Nlsdpfx Aoxiymtsf Sek - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 280 mm, turning diameter: 280 mm, feed length X-axis: 750 mm, overall weight: 1,150 kg, We specialize in the repair of machine tools and currently offer a refurbished, very popular and high-quality TOS Žebrák S 28 lathe (year of manufacture: 1956) for sale. - The machine is in perfect condition following a complete overhaul - Accuracy equivalent to a new machine Accessories: - new chuck (diameter 160 mm) - digital readout (Jirka a spol.) - change gears - collet chuck + collets - fixed stop with fine adjustment - adjustable stops Nljdpou Ur Dyefx Af Ssk - fixed steady rest - LED light Price is excl. VAT.

Condition: good (used), Lead and feed screw lathe SUI 40/1000 with accessories Njdpfsxcf H Eex Af Sslk

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Nedpfx Afjmk E D Ie Selk Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: excellent (used), track width: 360mm shaft width: 350mm Nodou Evqnepfx Af Sjlk max disc diameter: 350mm disc bore diameter: 80mm max cutting height: 120mm electric lifting of the saw shaft electric lifting of the body smooth regulation of feed speed feed motor: 2,5kW main motor: 45kW

Condition: used, Year of construction: 1997, feed length X-axis: 900 mm, feed length Y-axis: 450 mm, feed length Z-axis: 400 mm, X/Y/Z travels: 900/450/400 mm Table area: 1120x400 mm Max. table load: 600 kg Spindle taper: ISO 50 Total power input: 20 kVA Machine overall dimensions (LxWxH): 2560 x 3280 x 3355 mm Machine total weight: 4550 kg Control system: Heidenhain TNC 415 Nljdpfx Aextaxdof Sek Machine incl. the following accessories: 4th axis, vice, toolholder, collets, probe, manuals

Condition: good (used), functionality: fully functional, Used TOS SUI 50 - 1500 lathe with extensive accessories for sale For sale: robust and precise TOS SUI 50 - 1500 lathe – ideal for workshops, metalworking, and ambitious hobbyists. 🔹 Distance between centers: 1500 mm 🔹 Swing over bed: 500 mm 🔹 Spindle speed: 14 – 2240 rpm 🔹 Spindle bore: 56 mm 🔹 Dimensions (LxWxH): 3000 x 1300 x 1500 mm 🔹 Weight: approx. 2.9 tons ✅ The machine is used, but in technically good condition and ready for immediate use. 📍 Location: Werdau 📅 Inspection possible – simply arrange an appointment! If you're interested, just get in touch – preferably by message or phone. Nlsdpfewu Dn Iox Af Sek

Condition: good (used), Well used TOS TRENCIN SUI40-50. lathe Center width 1500 mm Nodporwd Hzjfx Af Sjlk Rotation over machine bed 500 mm Rotation over support 320 mm Spindle speed 14 to 2240 rpm Machine is operational and in good condition

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 780 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 2,500 rpm, TECHNICAL DETAILS Travel X-axis travel: 1,600 mm Y-axis travel: 1,000 mm Z-axis travel: 780 mm Number of machining axes (excluding parallel axes): 5 Table Clamping surface (left-right): 1,000 mm Clamping surface (front-back): 1,000 mm Workpiece weight (max): 6,000 kg Rotary axis: C > Positioning accuracy 0.001° Milling Spindle/Head Spindle type: Swivel head > Positioning accuracy 2.5° Speed range: up to 2,500 rpm Tool holder: ISO SK 50 Drive power: 22 kW Tool Magazine Tool positions: 60 Workpiece Automation Number of storage spaces: 2 Pallet length: 1,000 mm Pallet width: 1,000 mm Number of pallets: 2 MACHINE DETAILS Dimensions & Weights Space requirement (left/right): 6,400 mm Njdpfxoxb Rpcs Af Solk Space requirement (front/back): 6,900 mm Overall height: 4,000 mm Total weight: approx. 26,000 kg Control: HEIDENHAIN TNC 426

Condition: used, machine/vehicle number: 0257391, height of centers: 160 mm Njdpjgayiwofx Af Sslk distance between centers: 1500 mm grinding wheel measures: 500 x 127 x 40 mm grinding wheel rotations: 1570/2050 Upm electrical connection: 380 V kW space needed: 4400/6400 x 2000 x 1400 mm weight: ca. 4000 kg