Used Gimaco 200 Fwt for sale (41,332)

Condition: used, Year of construction: 2010, machine/vehicle number: 414629, Durchmesser Ansaugstutzen : 200 mm Fob E T Sgjvnivfsxopg Nenn-Volumenstrom : 2262 m³/h Max. Volumenstrom : 3500 m³/h Filterfläche : 12,65 m² Abreinigung : Rüttelmotor Späneentsorgung : 2 Sammelbehälter Sammelvolumen : 330 Liter Filtermaterial : Polyesternadelfilz Unterdruck bei Vnenn : 2750 Pa Aufstellung : fahrbar Gewicht ca. : 450 kg Motorleistung : 4 kW Stromanschluss ca. : 400 Volt/50Hz

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, Functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Fpobot Dxqts E T Sgxsg Incl. robot (ASS) Production in clean room.

Year of construction: 2000, Condition: good (used), Krauss Maffei Injection Moulding Machine Type: KM 200-700C1 Control: MC4 Year: 2000 Clamping unit Clamping force t: 200 Opening stroke mm: 1050 Distance between tie bars mm: 560x560 Installation height min/max mm: 350 Mould fixing platen size h x v: 915x915 Injection unit Screw size mm: 50 Injection pressure increased bar: 1892 Size and weight Dimension HxWxD m: 5,50 x 2,20 x 2,30 Total weight Kg: 10530 Additional information - Kernzug 2-Fach Hydraulisch - Werkzeugdüsensteuerung Pneumatisch - Werkzeugheizung 8 Regelkreise - 2mal WZ-Temperaturüberwachung - 4-Fach Kistler Ladungsverstärker - Ausblasventil Fpsb E Tslpapks Sgxsg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,485 h, Functionality: fully functional, clamping force: 2 kN, screw diameter: 45 mm, displacement volume: 305 cm³, Stock-No. 13972 Manufacturer Krauss Maffei Type of machine KM 200 – 700 C1 Year 2006 Controlversion MC 4 Screentext German Working hours 43000 h Clamping unit: Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 350 mm Max. daylight 1050 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22 Injection pressure 2336 bar Stroke volume 305 ccm Shot weight (PS) 278 gr. Injection rate 200 ccm/s Screw speed 342 1/min Plasticising rate max. 37 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 30 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,20 x 2,30 m Total machine weight 10.530 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads - 4-fold water flower - Conveyor 2000 x 500 x 1000 mm - Krauss Maffei Robot LR100 X: 550 mm Servo Y: 1200 mm Servo Fpeb E T Ssuccyuogxjg Z: 2500 mm Servo C: 0 - 90° pneumatic Additional Options: - 1 x air valve - 16 x hot runner controller - 2 x hydr. core pull - 4 x pneumatic sequentional valve

Condition: good (used), 959 USED Diosna D 200 paddle mixer. EXTERNAL DIMENSIONS (in cm.): - height: 110, - width: 108, - length: 118. BOWL DIMENSIONS (in cm.): - external width 95, - internal width 90, - depth 50. TECHNICAL DATA: - capacity: 200 kg of dough. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... Fpob E T Sgjvb Dgloxjg bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2014, operating hours: 8,500 h, Functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 150 mm, turning diameter: 250 mm, TECHNICAL DETAILS Machine type Vertical turning machine with 2 moving turning spindles and 2 tool turrets Operating hours Operating hours: approx. 8,500 h Machine cycles: 497,000 Control system Siemens 840D Spindle Spindle nose size: A6 DIN55026 with Schunk D260 mm Max. Speed: 4,500 rpm Drive power: 12.5 kW Working range Max. Turning length: 150 mm Max. turning diameter: 250 mm Cross slide Fobeu Nhc Rs E T Sgxspg Axes: X and Z-axis Tool holder: VDI40 according to DIN69880 Number of stations per turret: 8 Workpiece feed Conveyor belt type: Rectangular table for approx. 30 flanges, diameter 200 mm, approx. 150 kg Workpiece handling: Servo-pneumatic lifting axis for feeding and returning the workpieces to the clamping device Special functions Production of identical workpieces on both spindles or of two different workpieces possible Turning device with gripper diameter 250 mm, installed between 1st and 2nd spindle Finished part storage Type: Rotary table with diameter 1,500 mm for approx. 30 flanges, diameter 200 mm, approx. 150 kg EQUIPMENT Chip conveyor with coolant tank

Condition: new, Year of construction: 2005, Grinding spindle type: SFAA-K-200 x 450 - 140x700 Fpob E T Sgsvd Dkpexeg Manufacturer: Spindellagerungstechnik Fraureuth GmbH Length: 700 mm In use, order as stock.

Year of construction: 2024, Condition: new, Functionality: fully functional, Technical description: The system is designed for weighing standard cars. The loading trolley (200 or 300 litres) is pushed into the system. The free stroke and the weighing process are triggered by a button. The free stroke is carried out via motor drive. In connection with the bending rod weighing cell and the weighing terminal, the weight can be read in the display and passed on to the existing DMS or ERP system. If necessary, the recipe scale can be equipped with casters as a mobile version. The system can be equipped with all common weighing terminals. • Stainless steel base frame in hygienic design • 1 drive unit Fpsbsttv Dfs E T Sgxsg • Button • Shafts, bearings • Height-adjustable feet (alternatively mobile version) • CEE plug

Condition: new, Year of construction: 2025, Professional belt grinder CORMAK BS 150-200 for rough grinding and polishing of metal. Suitable for various shapes and materials. The size of the sanding belt is 150x2000 mm and the powerful 3 kW motor make it universal in its applications. Characteristics of the BS150-200 belt sander CORMAK BS150-200 belt sander with extraction - excellent combination of performance and stability. Equipped with a solid and rigid steel base , it ensures reliable stability during operation. With one working speed, precision sanding becomes easier than ever before. Adjustable, stepless grinding angle with lock allows precise setting and maintaining the optimal position. The large grinding surface facilitates manipulation and grinding of various workpieces. Additionally, the belt sander is standardly equipped with an effective extraction system , eliminating dust and ensuring a clean and safe working environment. Good stability thanks to the strong and rigid steel base Two working speeds Adjustable grinding angle with lock The large grinding surface makes it easier to grind workpieces Equipped with extraction as standard Product parameters: Dimensions of the abrasive belt (L x W) [mm] 2000x150 Belt speed [m/s] 15/30 Fsbjvu Uqno E T Sgxspg Engine speed [rpm] 1400/2800 Engine power [kW] 2.5/3.0 Weight [kg] 117 Dimensions (L x W x H) [mm] 1000x650x1150 Power supply [V] 400 Extraction motor power [kW] 0.37

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 Fpjb E Touak Nle Sgxog 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Condition: like new (used), Year of construction: 2021, Abicor -Binzel FES-200 Year of construction 2021 220 Volt weight 23 kg Separation efficiency > 95 % Extraction capacity 200 m³/h Number of filter cartridges 1 pc. Filter area 0.8 m² m² Hose diameter Fpjb Eevgmgle T Sgxog 50 mm Manual and automatic switch-on -as shown with burner

Condition: ready for operation (used), 6216 VENEER PRESS KOLMAG T 200 shelf width: 45 cm shelf length: 120 cm 3 hydraulic cylinders piston diameter: 14 cm Fpob E T Sgju E Rxyexog pump motor power: 3 KW electric heating timer setting dimensions: length 175 cm, width 70 cm, height 213 cm

Year of construction: 2023, Condition: new, TWO ARBOR MULTIRIP SAW WITH MASSIVE CONSTRUCTION - electro motors: 55/45kW / 75/55kW / 90/75kW - max. board width: 600mm Feb E T Sofm U N Degxepg - max. board thickness: 200mm - more possibilities of infeed and outfeed conveyors (mechanic, motorised, infeed with centration, outfeed with sorting waste etc.)

Condition: excellent (used), Year of construction: 2005, dual track rollforming line Fob E T Sgsh Tm Rloxspg 2 x 18 stations design: cassette shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm

Condition: new, Year of construction: 2024, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front Fpsb E Tob Nrg Uo Sgxog - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left

Year of construction: 2017, Condition: like new (used), Angle grinding tools ANGLE-GRINDER are suitable for grinding, plastering and deburring grinding wheels of all kinds on almost all materials. Suitable for robotic surface treatment. The processing disc is mounted axle-removable, wherein the necessary contact force is programmatically controlled can be varied. By switching the control air can compensate the dead weight and the contact pressure Fsb E T Sged Sbngsxspg regulated to zero. The deflection takes place in parallel via a parallelogram mechanism without changing the tool angle. The tool can be used in any position where the Robot arm or stationary on a tool stand Drive: pneumatic Engine power: 2.5 kW (3.4 hp) Idle speed: 8'500 min-1 / rpm Deflection path: 28 mm axial Feed: 50 - 200 mm/sec. Air consumption: 32 l/s (67.8 cfm) Weight: 6.7 kg

Condition: excellent (used), Year of construction: 2001, We are offering for sale an industrial pump URACA P3-80, manufactured in 2001, paired with a powerful 5-ton motor delivering 425 kW of power. This setup is ideal for high-demand industrial applications, ensuring reliable and efficient operation. Technical Specifications: Model: URACA P3-80 Year of Manufacture: 2001 Flow Rate (Q): 1000 l/min Pressure (P): 200 bar Power (n): 354 kW Motor Power: 425 kW Motor Weight: 5 tons Condition: Fully operational and well-maintained Fobju Stl As E T Sgxopg Pricing: We are open to receiving price offers for this pump and motor system. Location: Gerolstein, Germany

Condition: used, Functionality: fully functional, Year of construction: 2008, operating hours: 9,115 h, load capacity: 2,000 kg, fuel type: electric, fork length: 1,800 mm, drive type: Elektro, Low lift truck Load centre of gravity: 600 Condition: Ready for use and fully functional Fpob E T Sgovtu A Isxjg Technical condition: good Front tyres type: polyurethane Rear tyres type: polyurethane Battery voltage: 225V Battery year of manufacture: 2016 Description:

Year of construction: 2022, Condition: new, Two-axis multi-blade circular saw type 750 40/200 - Engines: 1x75 kW below, + 1x55 kW upper - min./max. cutting height: 40mm to 200mm - max. width of cutting board: 700mm - max. length of prism 3500mm or more - min.lenght of prism 1500mm - max. cutting width 600 mm - max. diameter of circular saw blade 350-400mm - max. Number of sheets on top axis: 10 pcs ø 350 mm - max. Number of sheets on lower axis: 10 pcs ø 350 mm Fpob E T Sogr D Hcogxsg - automatical movement with frequency regulator - chain conveyor after the blades + driven infeed conveyor with centrators + driven outfeed conveyor with ejection

Condition: excellent (used), Year of construction: 2005, 19 stations Fpsbeh Tm Rae E T Sgxeg design: cassette shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm

Condition: new, Year of construction: 2024, Functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2 l per day Fsb E T Sgjqvlw Iexopg Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Year of construction: 1977, Condition: used, pressure 200 t distance between columns 500 mm Fjb Eslp Uz Us T Sgxjpg stroke 150 mm ram surface 320 mm table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 11612132118, The SBM 200 002 is an advanced folding machine specially designed for precise and efficient sheet metal bending. It is equipped with a modern touchscreen CNC control that enables user-friendly input and management of bending parameters. Technical data: Power supply: 400 V, 50 Hz Supply line fuses: 3 x 16 A Output: 7.5 kW Fob E T Sgeuniczexspg Maximum pump output: 21.5 l/min Maximum operating pressure: 135 bar Maximum material width: 2000 mm Maximum material thickness: 4 mm (with a tensile strength of 400 N/mm²) Maximum bending angle: 130 degrees Smallest bending radius: 2 times the sheet thickness Smallest leg length: 10 times the sheet thickness Dimensions (W x D x H): 3835 x 1880 x 2250 mm Weight: approx. 5 tons Noise emission: ≤ 70 dB Equipment and functions: Touchscreen CNC control: the machine has an intuitive touchscreen user interface that allows backgauge values and bending angles to be entered. Microprocessor control: The control allows the input and storage of up to 8 back gauge positions and up to 8 angles per bending part. Storage capacity: A total of up to 999 bending parts can be stored. Up to 8 values for the backgauge and 8 values for the angle can be stored for each bending part. Automatic execution: The folding machine automatically executes the operations for the selected profiles, which significantly increases the efficiency and repeatability of the bending processes. This machine is ideal for companies that require high precision and flexibility in sheet metal processing and offers considerable advantages in production thanks to its extensive memory and automation functions.

Year of construction: 2007, Condition: excellent (used), KEMPER HUBKNETER FOR 300 KG dough or mass with 2 stainless steel/Inox kettles on rollers with 2 clock and 2 speeds Feb E T Sjgh Dg Hogxopg the boilers are tiltable sideways the machine can be painted on request

Condition: new, Year of construction: 2025, The system can be loaded onto a truck with a forklift and is ready for operation in just a few simple steps. A 16A socket is required. Total dimensions of the system LxWxH 3.5 x 1.06 x 2.98m (ready for operation) Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density Feb E Tofrugko Sgxjpg - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm-30mm, (bigger particles are possible with a special design)