Used Gimaco 200 Fwt for sale (41,310)

Condition: good (used), Name: Agitator mill Manufacturer: Bühler Type: Super Flow VCR 200 Year built: 2010 Fpjherdfvzjx Dxmmsg Speed: 500 to 750 rpm, the peripheral speed of the rotor 9.2 to 13.8 m/s Content: 5 liters Material: Stainless steel Dimensions: L 1600 x W 1100 x H 2100 mm Empty weight: 1850 kg Technical doc.: Yes Message: Product pressure 5 bar, temperature 0 to 70 °C Accessories: Switch cabinet Condition: Used-good Price: On demand

Condition: excellent (used), Year of construction: 2018, We are offering a set that we have never had before Top maintained condition AK folding bench Working length a little over 2m Sheet thickness iron 1,5mm - aluminum 2mm Bending support if desired pneumatically via small lever Depth stop 1m with digital display and adjustable from the front continuous sheet support and finger stop down to approx. 1cm Optional - beading device and hemming device for plug-in seam on rail (for this system there are many other tools such as scissors, lead wavers, beading etc.) Plate shears HS Fpohjuvby Ujx Dxmmsg Working width slightly over 2m Material thickness 1.25 mm iron - aluminum 1.75 Depth stop 1m adjustable from the front with digital display Optional sheet metal carriage with chute 2018 new price over 25000 - today significantly more

Condition: new, Functionality: fully functional, machine/vehicle number: 05124130, power: 7.5 kW (10.20 HP), protection type (IP code): IP64, Pump is new from spare parts stock Fehxsuyg Rzj Dxmmopg

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, pressure: 11.1 bar, operating pressure: 6 bar, temperature: 102 °C, TECHNICAL DETAILS Design: three-pass design for low-NOx operation Installation: inside Altitude: 400 m Feed water reference temperature: 102 °C Gross steam output: max. 820 kg/h Nominal boiler output: 530 kW Operating pressure: max. 6 bar Test pressure: 11.1 bar Operating pressure: approx. 3 bar Exhaust gas loss with Eco Gas/Oil: max. 7.4/6.8 mbar Exhaust gas temperature after Eco: 119 °C Boiler efficiency with Eco: 95.2% Contents Fjhx Dxsvr Tkujmmopg Total water volume: 3.25 m³ Water volume up to NW with Eco 200: 2.50 m³ Average working range: 2.47 m³ Steam water volume: 0.70 m³ Feed water volume: 2.45 m³ MACHINE DETAILS Mains voltage: 3 x 400 V 50 Hz Boiler length: 3,640 mm Boiler width: approx. 1,700 mm Boiler height (incl. Eco 200): 3,760 mm Flame tube diameter: 556 mm Flame tube length: 2,100 mm Weights Transport weight: approx. 3.5 t Operating weight (pressure test): approx. 6.75 t Nominal connection diameters on the boiler Main steam: DN/PN 80/16 Safety valve: DN/PN 25/40 Feed water: DN/PN 25/40 Blowdown: DN/PN 25/40 Ventilation: DN/PN 15/40 Flue gas connection outside/inside: DN/PN 224/216

Condition: good (used), Year of construction: 2013, Functionality: fully functional, Print speed - up to 200m²/h Print mode - 10 pictoliter Resolution - up to 1000 dpi Color - Cyan, Magenta, Yellow, Black, light Magenta, light Cyan Max. print width - 2500 mm Fshxsttvwre Dxmmspg Current printed meter - 208090 m²

Condition: used, Gear skiving machine LIEBHERR LK 200 Fpshx Djuhbq Asxmmog

Year of construction: 2002, Condition: excellent (used), machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maier head HWR 225 Fpehoitcvuox Dxmmjg Condition: Used very good Price: on request

Condition: new, Exhibitor compressor Condition: very good Fpehx Dxmsufp Ecemjg Technical data: Pressure 10 bar Suction capacity 330 l/min Filling capacity 200 l/min Speed 1400 min-1 Vessel volume 24 l Weight 37.0 kg Sound pressure level 80 dB(A) Dimensions (WxHxD) 480x790x530 mm Drive power 2.2 kW Voltage 230 V Your advantages: * Mobile piston compressor * Applications: universally applicable * Powerful and durable * Directly flanged unit * Endurance runner * Oil-free * Robust plastic wheels for mobile transportation Volume: * Sound pressure level LPA: 80 dB(A) according to Dir. 2006/42/CE * Sound power level LWA: No manufacturer specifications according to DIN EN ISO 3744 (RL 2000/14/EC) * The following correlation is important in practice: The sound power level of technical sound sources at a measuring distance of 1 m is usually approx. 10 to 15 dB higher than the sound pressure level. Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon. - Fri. from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Condition: excellent (used), Detection head 350 x 200 mm Useful height 145 mm Fshx Detwq I Eoxmmepg Intralox belt 1350 x 300 mm With ejection of defective products in closed container Year of construction 2018

Condition: as good as new (ex-display), Technical data: Table size 600 x 320 mm, drilling hole depth 205 mm, drilling hole length 250 mm, height adjustment 165 mm, drilling unit swivels 45° on both sides, motor speed 2840 rpm, motor output 3 kW S6 (2.2 Kw S1), weight 180 kg Fpshsvrvpasx Dxmmsg

Condition: good (used), Year of construction: 2013, Functionality: fully functional, Technical details: Print speed - up to 200 m²/h Print mode - 10 pictoliters Resolution - up to 1000 dpi Color - cyan, magenta, yellow, black, light magenta, light cyan Max. Print width - 2500 mm Fpjhx Dxottvzkjmmsg Actual printed meters - 163070 m²

Year of construction: 2004, Condition: used, Bite here 4 pieces of fans with mounting plate and bracket. Fpjhx Djk Dz Enexmmog These were installed in an EC 200HP from York. Price is per fan.

Year of construction: 2002, Condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Fjhx Dxeitcu Ejmmepg Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Condition: used, Year of construction: 2018, Vibratory conveyor from Wolfgang Hörmle For sale in different versions and in good condition. SRC-N 200 left SRC-N 200 right SRC-N 250 left SRC-N 250 right Fpshet Ect Iex Dxmmog HFS 168 control unit

Condition: good (used), Solid machine vice Manufacturer: WMW Designation: Jaws: 200 x 50 mm Clamping width: 300 mm Footprint: 580 x 190 mm Height: 150 mm Weight: 63 kg Fohx Dxouithismmspg Total dimensions: 660 x 190 x 150 mm Price: EUR 600,-- per piece (2 pieces available) Price incl. 19% VAT: EUR 714,-- per piece ( 2 pieces available) Price for 2 pieces: EUR 1.000,-- plus 19% VAT.

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Fpohx Dxjg Ey Ufemmog Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, overall weight: 18,000 kg, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2018, tire size: 235/75 r17,5, Year of construction: 2017, machine/vehicle number: 0e87837859aec926e9db10456, Further information Chassis: Welded steel construction, double offset with drop deck in front of and behind axle unit, drop deck slanted towards entrance, turntable with strong ball bearing slewing ring, folding rear support, wheel chocks, side collision protection, quarter-shell mudguards Lashing eyes: above front axle: 2 pairs of ring lashing eyes per 5 tons at the front on the offset drop deck/rear axle: 6 pairs of lashing eyes laterally in the drop deck per 8 tons, 6 pairs of lashing eyes per 5 tons between the side members, pair of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 tons ring lashing eyes embedded in the floor. Ring lashing eyes embedded in the floor Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Brake system: 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads Electrical system: 24 volt, multi-chamber lights, amber lighting at the sides, 2 white position lights at the front Fpohx Dxei Ri N Usmmjg 2 white/red lane departure lights at the rear, rotating beacon with holder, pair of warning signs illuminated and extendable to 3,000 mm, 2 x 7-pin interchangeable plugs at the front Floor: Front offset with steel / checker plate covering, storage box recessed in drive-over slope to offset, tramline area and in the middle between the beams with steel / checker plate covering, rear slope with 70 mm softwood floor, deep loading area incl. rear slope 5900 mm Drive-on ramps: Hook-in strip for aluminum ramps across the entire width. as U-profile across the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips to ECE R 048, white at the sides and red at the rear

Year of construction: 2010, operating hours: 0 h, Condition: like new (used), This used rotary feeder served only for spare parts storage for a foreign project and was therefore never in use. The rotary feeder therefore has no operating hours and is in mint condition. Fpehxogw A Ets Dxmmjg The used rotary feeder with square inlet is suitable for controlled feeding and dosing of powdered and granulated bulk materials from silos, hoppers, pneumatic conveying systems, filter systems and cyclones. Name: Used Rotary Valve Manufacturer: Sunds MDF Type: LAF-200 Year built: 2010 Material: regular steel Driving force: 11 kW Dimensions: L 3400 x W 2200 x H 2370 mm Empty weight: approx. 4500 kg Speed: 1475 / 22 Condition: Used Technical documentation: no Message: inlet L: 1980 mm x W: 1180 mm, outlet L: 2180 mm x W: 1000 mm, 7 chambers. The rotary valve has no operating hours and is in mint condition. Price: on request

Condition: good (used), Machine number: 1205002-20 TyP / Model: SWA 200 table: 1.000 x 185 mm table movement longitudinal: 600 mm support movement crosswise: 150 mm grinding length: 600 mm grinding diameter: 200 mm grinding spindle rotation: 50 Fpehx Dxmjgmby Nemeg grinding spindle head height adjustment: 150 mm grinding wheel diameter: 180 mm spindle speed: Connection: 0,4 Accessories/equipment: Condition: good weight: 0,95 t dimensions: 1.200 x 1.100 x 1.500 mm

Condition: used, overall weight: 18,000 kg, empty load weight: 5,340 kg, maximum load weight: 12,660 kg, axle configuration: 2 axles, first registration: 09/2021, tire size: 235/75 r17,5, Year of construction: 2021, machine/vehicle number: 7e3bf6da9bda95b470a3b0a97, Further information Chassis central axle trailer Fine-grained steel welded construction Type TPS 200 (special approval required) Front gear support leg Folding rear support Wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Spray flaps in front of each axle and anti-spray flaps behind each axle 1x spare wheel holder for 1 e-wheel, with wheel mounting kit 1x spare wheel, same make as basic tires, steel rim 1x stainless steel storage box, w=600/h=400/t=500 mm, with polished door, lockable Low loader lashing eyes 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) 7 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 2 pairs of hinged lashing eyes additionally embedded in the low loading area, 10 tons each1 pair at the front and 1 pair at the rear slope Central axle trailer towing device Tow bar with tested 50 mm towing eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technical) Air suspension Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake Duomatic connection at the front, with connection line to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires Fshx Dxop N Dgusmmjpg 235/75 R17.5 Fulda brand Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin plug at the front, with connecting cable, 1 additional LED work light(s) at the rear, switched via reversing light 1x LED rotating beacon with holder, switched via parking light (removable light) Floor then with 70 mm softwood floor, steel/ checker plate flooring in the wheel housing area Rear slope with Mega Grip covering made of toothed grating Deep loading area incl. rear slope 6500 mm Front bulkhead / front corner stanchions 25 mm aluminum hollow profile, 400 mm high, pluggable Drive-on ramps Steel ramps 3600 mm long, 750 mm wide, divided via cable extension, laterally movable, Ramp displacement, minimum gap approx. 600 mm, maximum outer width approx. 2880 mm Ramp surface with Mega Grip made of toothed grating Hydraulic operation via own electro-hydraulic unit, mounted in the steel box, operation on the side in FR right . Note: Nato socket with connecting cable required on the truck. The connecting cable must not be connected while driving! Hydraulic lateral displacement of the drive-on ramps, individually controllable (only in conjunction with hydraulic ramp actuation) Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) A special permit is required for axle loads of 10,000 kg. The approval must be applied for individually in each federal state

Condition: good (used), Type / Model: FE 200/800 Size: 800 x 200 mm Fpjhxemqirps Dxmmjg Height: 80 mm Connection: Accessories/equipment: cable must be reconnected Condition: good weight: approx. 100 kg Dimensions: 800 x 200 x 80 mm

Condition: new, overall weight: 18 kg, empty load weight: 6 kg, maximum load weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, machine/vehicle number: 535119ca408d3bd5a8e74be51, Further information Chassis low loader trailer Welded steel construction Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support Wheel chocks with holder Aluminum side collision protection Half-shell mudguards on 1st axle, quarter-shell mudguards in front of and behind the 2nd axle with anti-spray flaps behind each axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Widenings extendable to 3,000 mm (not in rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm), storage compartment for wooden planks in the middle of the loading area, wooden planks 70 mm for widening to 3,000 mm, Low loader lashing eyes 3 pairs of lashing points each 10 tons integrated in the floor at the front 6 pairs of lashing points at the top and sides, each 10 tons, integrated in the outer frame 1 x according to the rest of the neck area distributed between them, spacing not greater than 1200 mm, 1 x rear slope 5 pairs of ring lashing eyes embedded in the outer frame, 5 tons each (instead of stake pockets) Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white/red rear lane departure lights 2 white position lights at the front 1 rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin interchangeable plugs at the front, with connecting cable, floor Front area steel floor, then with 70 mm softwood floor, steel/ checker plate flooring in the wheel arch area Rear slope with 70 mm softwood floor Low loading area incl. rear slope 8 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Additional ramp safety device hinged at the bottom (to prevent the ramps from slipping sideways, not in conjunction with hydraulic side ramp displacement) covered with wood with spring lift support Operating instructions A special permit is required for axle loads of 10,000 kg. The permit must be applied for individually in each federal state; the legislator does not have to give a commitment for 20 tons GG. Customer risk. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Approval / plates Country of approval: Germany Test approval according to EG 2007/46 24/7 service hotline Prepared for two-line license plate holder Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Warning sign according to ECE - 70 Paint finish Frame DB nova gray Drive-on ramps hot-dip galvanized Attentio Fshji Ri N Hjx Dxmmspg

Year of construction: 1988, Condition: good (used), Machine number: 91043 Fshxomqirae Dxmmspg Type / Model: FE 200/600 Size: 600 x 200 mm Height: 90 mm Connection: 24 V 110 W Accessories/equipment: Condition: good Weight: 80 kg Dimensions: 600 x 200 x 90 mm

Condition: new, overall weight: 18 kg, empty load weight: 5 kg, maximum load weight: 12 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, machine/vehicle number: 2b58968e34fac93b429a256e9, Further information Chassis low loader trailer Welded steel construction Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support Wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Quarter-shell mudguards in front of 1st axle Spare wheel holder for 1 electric wheel, with wheel mounting kit Spare wheel, same make as basic tires, steel rim Plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Low loader lashing eyes 3 pairs of lashing points, each 10 tons, integrated in the floor at the front 6 pairs of lashing mushrooms at the top and sides, each 10 tons, embedded in the outer frame 1 x according to the rest of the neck area, distributed between them, spacing not greater than 1200 mm 1 x rear bevel 5 pairs of ring lashing eyes embedded in the outer frame, 5 tons each (can be converted to stake pockets) Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Fpjhsi Ri Nxjx Dxmmsg 2 non-interchangeable clutch heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cableVoltage converter for 12/24 volt operationNote! A 7-pin 12 volt socket is required on the tractor/tractor! (Required in conjunction with electrical voltage converter!) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white/red rear lane departure lights 2 white position lights at the front Additional LED work light(s) at the rear, switched via reversing light 2 x 7-pin interchangeable plugs at the front, with connecting cable1 x 7-pin agricultural plugVoltage converter 12/24 volt (only for electrics, not for ABS/EBS) Floor Front area steel floor, then with 70 mm softwood floor, steel/ checker plate flooring in the wheel housing area Rear slope with 70 mm softwood floor Low loading area incl. rear slope 8 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions A special permit is required for axle loads of 10,000 kg. The permit must be applied for individually in each federal state; the legislator does not have to give an approval for 20 t GG. Customer risk. Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Drawbar Galvanized or black, manufacturer's choice Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: new, overall weight: 20 kg, empty load weight: 3 kg, maximum load weight: 16 kg, axle configuration: 1 axle, tire size: 385 / 65 r 22,5, machine/vehicle number: a198a229880f94ce822d671fc, Further information Chassis semi-trailer container Welded fine-grained steel construction, saddle plate with replaceable 2 king pins, 2 pairs of removable guide rollers 4 container locks with sturdy outriggers on 20 -base for swap bodies 7.45 and 7.82 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation, unhitching under load only possible with even outreach! 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard, Half-shell mudguards with anti-spray flaps Axle+suspension SAF disc brake axle, with 430 mm disc diameter, Air suspension with lifting & lowering valve, with holding function for H&S Wheels and tires 385 / 65 R 22,5 from leading manufacturers Factory silver steel rims Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Fpshx Dxmoi Rixnsmjg Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable sockets at the front, without connecting cable Approval / plates Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) Prepared for single-line license plate holder Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Warning sign according to ECE - 70 Paint finish Frame DB nova gray Support legs coated black Attention: Archive pictures!