Used Kaltenbach for sale (113)

Condition: ready for operation (used), Machine is disconected from power. Cgob E Ryehva I Io Snot

Condition: good (used), Automatic Circular Saw KALTENBACH Ø 370 mm Blades diameter: Ø 370 mm Maxi cutting height in round: 115 mm Cgjb E Rsurtt Ssy Snet Maxi cutting height in flat: 120 mm 2 speed rotation motor Graduated circular tray Ø 590 mm Swivel +/- 45° Hydraulic clamping of the workpiece Graduated stop length: 2000 mm Machine used only for stainless steel cutting Voltage: 380 V Length with fixed feed: 3000 mm Depth: 1400 mm Height: 2000 mm Weight: approx 900 kg

Condition: used, Year of construction: 1975, saw blade diameter 400 mm cutting diameter 130 mm stroke 135 mm saw blade diameter 370/400 mm feed speeds 0-500 mm/min cutting speed 1400/2800 U/min range of angles 0-180 ° capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 280 x 70 mm capacity 45 degrees: square 105 mm Wheel width 185 mm Required air-pressure 8 bar total power requirement 3,7/4,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,3 x 1,1 x 1,7 m Robust semi-automatic light metal profile sawing machine with cut from below and pneum. workpiece clamping from above, saw bridge adjustable from front to back. The year of construction is estimated! Any additional required safety shielding must be installed by the purchaser. Ceb E Ry Sovp Sdzensgt Machine dealer with own stock of 1600 m².

Condition: refurbished (used), Year of construction: 1998, A Kaltenbach cold circular saw is for sale. The machine has been completely disassembled and rebuilt. During the overhaul, the gearbox, motor, and hydraulics were overhauled. The table was refaced and re-bearings were installed. Cgsb E Ryjwcgdhe Snot Gearbox is backlash-free! Type: KKS 400 E Year of manufacture: 1998 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid forward/reverse speed: 1,550 mm/min Maximum working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / Pick-up in 89558 Boehmenkirch Shipping available upon request Forklift available for loading.

Year of construction: 2010, Condition: used, machine/vehicle number: 0302-250004, Kaltenbach KBS 1010 - KDS 1015 drilling and sawing system, built in 2010 Cgebjv Rmnkj E Ry Snot The Kaltenbach drilling and sawing system is a combination of a Kaltenbach KBS 1010DG double-cutting miter band saw and a KDS 1015 profile beam drilling system.

Condition: used, -Saw blade Ø 350 mm -speed 130 m/min -with cooling device Cgjbjbwmxxo E Ry Snjt -total weight 1200 kg

Condition: refurbished (used), Kaltenbach circular saw completely overhauled. TECHNICAL DESCRIPTION KKS 400 KKS 400 Semi-automatic, hydraulic universal circular saw with rotary table for miter cuts SAW BLADE Segment saw blade Saw blade holder according to DIN 8576 ☒ 400 x 4 ☐ 450 x4 mm 50/4x14/80 mm WORKING AREA Round material 90/45° 125 150 mm Square material 90° 115 140 mm Csb E Rjvn Ic Rsy Snogt 45° 110 130 mm Flat material 90° 305 x 40 330 x 40 mm 45° 235 x 30 250 x 40 mm U-profiles standing 90/45° 120 x 55 140 x 60 mm lying 90° 240 x 85 280 x 95 mm 45° 180 x 70 220 x 80 mm Cutting lengths from 10 mm DRIVE POWER Saw motor 1.8/2.7 kW Hydraulics 1.5 kW Coolant pump 0.1 KW CUTTING SPEEDS (standard) 11.5/23 13/26 m/min or 10/20 11/22 m/min or 13/26 15/30 m/min SAW BLADE FEED continuously adjustable according to table 0 - 1,000 mm/min Saw blade rapid return 3,300 mm/min ELECTRICAL CONNECTION TN-S system - 3 phases, neutral conductor, earth 400/50 V/Hz WEIGHT Machine without accessories approx. 820 kg

Year of construction: 2007, Condition: ready for operation (used), Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible. Cjb E Ryewa Tile Snsgt

Year of construction: 2002, Condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW Cjbohzbipo E Ry Snjgt - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 1998, saw blade diameter 450 mm cutting diameter 150 mm capacity 90 degrees: flat 330 x 40 mm capacity 45 degrees: round 140 mm capacity 45 degrees: flat 250 x 40 mm cutting speed 10 - 70 m/min saw head feed 0 - 1000 mm/min sawing motor 1,7 / 2,6 kW weight of the machine ca. 1,1 t Accessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, Ceb E Ryev Hth As Snegt ingoing roller track 7000 mm, outgoing roller track 4000 mm

Year of construction: 2000, Condition: ready for operation (used), Main Drive Spindle motor power 7.5 kW Additional Equipment Roller Tables: On the infeed side with rack for the measuring carriage Optional: Roller tables for the outfeed area Automatic Cutting Pressure Regulation: Yes Electronic Saw Blade Slip Monitoring: Yes Integrated Chip Tray: Yes Length Measurement: For profiles up to 21 m in length Csb E Rou Ah Rnsy Snegt This sawing machine was manufactured in 2000 by KALTENBACH. The KBS 851 DGNC features a miter tilting capability of -60° left and -50° right, accommodating material dimensions at 90° up to 850 x 500 mm. It supports various saw blade types including M2, M42, and M51, with a cutting speed range of 20-120 m/min. Includes an integrated chip tray and Proficut control software. Ideal for steel profile cutting in construction and trade. For more information about this sawing machine, please reach out to us. Application Types Sawing

Year of construction: 1999, Condition: good (used), Cutting range at 90°: Round: 305 mm, square flat 360 x 305 mm Cutting range at 60°: Round: 305 mm, square flat 330 x 305 mm Cutting range at 45°: Round: 265 mm, square flat 265 x 300 mm Cutting range at 30°: Round: 175 mm, square flat 175 x 300 mm Cgeb E Rsifk Nljy Snjt

Year of construction: 1997, Condition: good (used), material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm Cjb E Ry Ssha Hdhenogt weight: 3.100 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 304289, Saw blade diameter: standard 450 mm, minimum 370 mm Saw blade type: HSS solid steel blade, 7-segment saw blade Ceb E Rev Sbtdjy Snogt Rotary table adjustment +/- 60° with feed

Condition: used, Year of construction: 2008, machine/vehicle number: 0702-240018, Cross transfer tables as a chain drag system for the cross transport of sectional steel in steel construction and steel trade. These sturdy cross tractors were used on a Kaltenbach bandsaw line and are in good condition. Csb E Rotql Tisy Snsgt 5 pieces cross drags as chain drag system without anti-slip bars, incl. 1 x motor and 6-8 x shafts, length 3700 mm (3920 mm installation length), height 600 mm

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm Cjb E Ryev Hhrve Snogt feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 total power requirement 5,5 kW weight of the machine ca. 1,8 t dimensions of machine L x W x H 2,45 x 1,20 x 2,00 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant

Condition: good (used), Year of construction: 1992, cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm -Drive power: 3. kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm Ceb Eer R Abps Ry Snsgt -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total H1100 mm / weight 378 kg -Roller conveyor right: total H1390 mm with stop / weight 670 kg -Dimensions saw: 167H2020 mm / Weight 2340 kg -Total weight: 3381 kg

Condition: excellent (used), Year of construction: 1993, saw blade diameter: 400 mm, Automatic cold circular sawing machine Fab. Kaltenbach Typ. KKS 400 EC NA Cgsberi R Nye E Ry Snet year 1993 Technical data Make: Kaltenbach Type: KKS 400 NA EC Year of manufacture: 1993 Saw blade Ø: 400 mm Motor power: 1,8/2,7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid feed/return: 1,550 mm/min Working area square material: 120 x 120 mm Working area flat material: 305 x 20 mm Working area round material: 130 mm Working area min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 3,500 x 1200 x 1800 mm Weight: approx. 300 kg Equipment - 400mm saw blade - Infeed and outfeed roller conveyor incl. manual stop - Vertical vice in long-stroke design - 135 mm stroke - Rotatable saw table for straight and angled cuts 180° swivel range - Automatic material feed - Workpiece fence with stable contact surfaces on both sides of the saw blade - Hydraulic saw blade feed, infinitely adjustable according to table - Work area lighting - Roller-mounted chip drawer, removable - Machine guard, - Machine CE conform All specifications without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine Cob E Roqxamgey Snegt KALTENBACH Type : MSK 400 Year 1976 with roller table. Cutting range Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Machine in good condition, operating instructions available.

Condition: ready for operation (used), Year of construction: 1974, disk of circular saw-Ø: 400 mm Cgjb Estp Hgto Ry Snet cutting area at 90° round: 120 mm cutting area at 90° square: 200 x 80 mm cutting area in mitre at 45° square: 150 x 70 mm cutting speed: 13, 17, 26 m/min engine: 380 V, 1,7/2,2/2,6 kW space needed: 1050 x 1000 x 1680 mm weight: ca. 850 kg

Condition: used, Functionality: fully functional, saw blade diameter: 400 mm, Brand: Kaltenbach Type: KKS 400M Max. saw blade diameter: Ø400 mm Cgsb E Ry Sjv Eu Rponot Used Kaltenbach circular saw in working condition.

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm cutting range - square - 120 x 120 mm cutting range - flat - 300 x 40 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 245 x 40 mm mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min control minipos 807 total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Csb E Ryotqqrzo Snjgt Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Condition: refurbished (used), Year of construction: 1988, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Gearbox free of play! Type: KKS 400 E Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Cgobev Iaxqe E Ry Snjt Weight: 900 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: ready for operation (used), Saw blade diameter: 450mm, cutting width: 4mm, saw blade type: HM/HSS, mounting hole: 50mm, fastening screws: 4, pitch circle fastening screws: 80mm, screw diameter: M12. Saw blade feed speed: 3.5m/min, rapid return: 4.5m/min, feed speed: 10m/min/20m/min, cut-off length single stroke: 10mm/1000mm, double stroke: 2000mm, turntable tilt: +/-90°. Machine dimensions X/Y/Z: approx. 2700mm/1450mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Cob E Ryov Hgkqj Snogt

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 300242, cutting range round at 90°: 460 mm, total length: 2,320 mm, total height: 2,570 mm, total width: 3,660 mm, overall weight: 7,500 kg, cutting range square at 90°: 600,460 mm, cutting diameter: 460 mm, space requirement height: 2,570 mm, space requirement length: 2,320 mm, space requirement width: 3,660 mm, cutting length (max.): 9,999 mm, working height: 720 mm, outer dimension length: 2,320 mm, outer dimension width: 3,660 mm, section length (max.): 9,999 mm, section length (min.): 8 mm, coolant pump power: 180 W, saw drive: 9,200 W, opening width: 600 mm, saw band width: 54 mm, saw band length: 7,470 mm, Equipment: rotational speed infinitely variable, BAND SAW KBR 460 NA A metal cutting band saw that combines high precision, power and automation. The KBR 460 NA from KALTENBACH is a solution designed for demanding production and industrial plants • High efficiency - a powerful main engine (7.5 or 9.2 kW) guarantees efficient and fast cutting. • Precision - infinitely variable cutting speed ensures perfect adjustment to any material. • Wide cutting range - supports round materials up to Ø 460 mm and square materials up to 600 x 460 mm! • Automation - possibility of setting sections up to 9999.9 mm long, which eliminates the need for manual operation. • Minimum waste - the automatic system allows you to leave a residual element only 30 mm long! • Stable and durable construction - weight 7500 kg guarantees reliability and long service life. TECHNICAL DATA Weight: approx. 7500 kg Dimensions (L/W/H): 2320 x 3660 x 2570 mm Width with chip feeder (optional): 4650 mm Cutting band Dimensions: 7470 x 54 x 1.3 mm Cutting speed: infinitely variable (approx. 1-7) Working range Material dimensions • Round material: max. Ø 460 mm • Square material (W x H): max. 600 x 460 mm Cutting lengths • With single stroke: min. 8 - 760 mm • With multiple stroke: max. 9999.9 mm Min. residual length in automatic mode: 30 mm Working height: 720 mm Electrical data • Main motor: 7.5 or 9.2 kW • Hydraulic motor: 2.2 kW • Coolant pump: 0.18 kW • Chip feeder (option): 0.18 kW • Roller conveyor drive (option): 0.18 kW • NC positioning unit (option): 0.37 kW Cgobjv Irtge E Ry Snjt