Used Seneca Tools for sale (36,674)

Condition: used, Year of construction: 1975, 1640 weight 280 kg ja +++++ Rsdpfxjh H Eqns Afzjn Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t +++++ Please note: Rjdpfx Aed N Smhofzen The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2005, condition: used, tool adaptor 50 mm driven tools 5 Stück 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Rjdpfx Aegtyhrjfzjn Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Plasma Cutting Unit HYPERTHERM Type Max 100 Machine No. 70-2513 Year of manufacture: 1990 Output: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Cutting capacity up to 32 mm sheet thickness Stepless adjustment range Rjdjyah Saopfx Afzjn Torch hose package length: 22 metres Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 63 Amp. plug - Torch hose package with straight torch, without switch, for robotic operation - Separate pushbutton switch to start the plasma cutter Required space (L x W x H): 850 x 700 x 1100 mm Weight: 225 kg Good condition

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame Rjdpfohb N Atjx Afzjn -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos -Dimensions: 450/265/H305 mm -Weight: 94 kg

Condition: good (used), Year of construction: 1994, Diameter: 500mm 3 Chuck: yes Spindle bore:160mm Rjdpfx Asx Ttc Esfzjn Connector: CAMLOCK D-8" Max. speed: 1900Rpm Length: 0mm Width: 0mm Height: 0mm Weight: 60kg

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Year: 2005 Rjdpfx Ajx Tp Ahefzjn

Condition: excellent (used), Year of construction: 2006, Metal cutting Tooling KITAGAWA - 250 Horizontal: Yes Vertical: Yes Redpfx Aex Tpzkjfzen Diameter: 230mm Tailstock: 3Mk indexing: 360.000° Centre height:180mm Control system:MAZATROL 640 M Length: 500mm Width: 400mm Height: 300mm Weight: 50kg

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm Rsdpfemck Ryjx Afzjn - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, x-travel 300 mm y-travel 275 mm z-travel 200 mm spindle tunring speed 40 - 2.000 U/min tool taper ISO 40 In our assessment, the machine is in good used condition Rsdpfx Afex Uru Ajzon and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Tool cabinet with sliding doors Width: 2000 mm Depth: 500 mm Height: 1200 mm Shelf depth: 400 mm Key included The cabinet is old but sturdy Rjdjx Tphkopfx Afzon The sliding doors operate flawlessly!

Condition: used, Tool measuring instrument Make Mitutoyo Rjdpfxsddtuyj Afzsn Type quick set R

Year of construction: 2019, condition: as good as new (ex-display), Rolling burr tool Make Gleason - Hurth Type:CH7M5R - 7B340-B1A 200 mm diameter unused is delivered in a wooden box Weight 9,5 kg Rodpfxsfgwt Es Afzjn

Condition: used, Spindle-out tool Make Kelch Diameter center hole 60 mm Steel cross section 34 mm square diameter hole circle for fixing hole 102,5 mm Rjdpfx Afocp Azxozsn Length 450 mm width 135 mm Height 105 mm

Year of construction: 2010, condition: excellent (used), Spindle tool in wooden case Make IGP Rsdpof Dx Srefx Afzen Spindle mount Mk 4 maximum spindle range 200 mm Weight 6,8 kg

Condition: excellent (used), Turning tools with rotating cutting plate Type: RRSDR 3232P12 Make Mitsubishi Length 165 mm Rodpfx Afed Hflaozen

Condition: excellent (used), functionality: fully functional, Tool holders, tool mountings - VDI40. The holders have been inspected and are in very good, almost like-new condition. The outstanding quality of well-known manufacturers guarantees high repeatability and very long service life: Order No.: 435_C1 → In stock: 2 units; Price: €56.00/unit Order No.: 430_C2 → In stock: 3 units; Price: €56.00/unit Order No.: 432_B4 → In stock: 2 units; Price: €56.00/unit Order No.: 433_B4 → In stock: 2 units; Price: €56.00/unit For orders of 4 units or more, the above prices include shipping within Germany (BRD). Single unit price: €65.00 net each, plus shipping costs. B3 with right-hand rotation; B4 with left-hand rotation; C1 with right-hand rotation; C2 with left-hand rotation. ----- Short reverse VDI radial tool holder. Tool holder for mounting external turning tools in the normal position, i.e., with carbide inserts facing upwards: C1 with right-hand rotation; C2 with left-hand rotation. Rodpfx Asyfw Dijfzen Shipping costs: on request. ----- Dimensions: D = 83 mm d-2 = 83/40 mm (45.52) H = 32.5 mm L1 = 75 mm L2 = 22 mm l-4 = ----- Further VDI40 holders available in our other listings, e.g., VDI40 Form E2 For drilling tools with cylindrical shank with internal and external coolant supply Surface hardened, blackened, and ground finish.

Condition: used, Stud welding machine with shielding gas and lift ignition HBS Type ARC 804 Serial No. 610652 Welding current up to 800 A at 5% duty cycle Welding voltage 30 V Open circuit voltage U0: 95 V Maximum stud diameter 10 mm Rated power 15 kVA Power supply 400 Volt, 50 Hz, 32 A plug Rated current 27 A - Welding current adjustable in 4 steps - Continuously variable welding time setting - Shielding gas connection with continuously adjustable time Rjdpfxjx Urcas Afzsn - Welding gun with lift ignition PMH70 - Hose package length 4.5 m - Ground cable with two leads and two ground clamps - Digital display for current welding time in ms - Indicator lights for external conductor failure (phase failure) - At maximum stud diameter, approx. 3 studs per minute - 1 piece stud holder Ø 8 mm (fitted), 1 piece stud holder Ø 10 mm, 1 support tube - Mobile on transport trolley - Approx. 20 kg welding studs M8 and M10 in steel and stainless steel, including 12 kg M8 x 25 in stainless steel Required space (L x W x H) 500 x 325 x 305 mm Weight of welding machine 60 kg Total weight with transport trolley 145 kg Good condition

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport Rodpfxex U Sfns Afzjn • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP1 2 axis Active Redpovuzg Aofx Afzon Displacements: X = 300 mm Y = 160 mm Z = 340 mm Speed 40-2000 Rpm Automatic feed and rapid traverse on the X, Y and Z axes. Continuously adjustable. Table dimensions 600 x 260 mm 2 axes Active control, point-to-point control. 3 axis digital readout from Heidehain. Spindle mounting SK40 Deckel mounting (outside thread)

Condition: excellent (used), Year of construction: 2007, 5 controlled axes: X, Y, Z, A, and B Fully automatic grinding wheel changer NUM Axium Power 1050 control system with PC Redpfoxt N Izox Afzsn TOOL DATA Max. diameter: Ø 250 mm Max. diameter for complete machining: Ø 250 mm Max. length for complete machining (from front edge of workpiece support): 430 mm Max. tool length between centers: 480 mm Center height: 195 mm X-axis grinding travel: 625 mm Z-axis cross slide travel: 305 mm Y-axis vertical slide travel: 305 mm All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust recirculating roller shoes on hardened rails. GRINDING HEAD, B AXIS Swiveling range in the horizontal plane: 240° Rotational speed: 120°/s Liquid-cooled motor spindle: 150 x 150 mm Grinding wheel mount with automatic quick-clamping system HSK - C/E 50 Spindle speed infinitely variable: 2,000 - 10,000 rpm Max. grinding wheel diameter: 150 mm Grinding wheel changer with 4 magazine slots Second probe arranged on the workpiece holder for automatic grinding wheel measurement, including software CHAIN LOADING MAGAZINE with PICK-UP arm Capacity: 160 tools Maximum workpiece diameter: 32 mm Maximum workpiece length: 200 mm Maximum tool weight: 2.5 kg CNC-controlled steady rest TURBO separator (filter system)

Condition: new, Year of construction: 1990, functionality: fully functional, Clamping ring for vertical quill TOS/INTOS FNG, FNGJ, FNGP tool milling machines. Machining must be carried out to suit the specific machine. We are happy to take care of this for you, as well as any repairs of milling heads for machines from the TOS/INTOS Zebrak production. Rjdpfx Afeyghywszen

Condition: used, Year of construction: 2000, machine/vehicle number: 5184, Danobat Danocenter NA-750 CNC Turning + Milling Center max swing 700mm, X/Y 255/520mm, 12-Pos-Upper-Tool-Turret and 8-Pos-Lower-Tool-Turret with driven tooling, Measuring Head, Tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15to Rsdpjxx Admofx Afzon

Condition: reconditioned (used), Year of construction: 1987, Universal toolroom milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 - 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drilling spindle sleeve Stepless feed via potentiometer 1 pcs. Machine vice 1 pc. Counterholder with counterbearing 1 pc. Milling arbor long 0 22 mm Various tool holders S 22 x 2 Bellows Z axis Machine light Automatic central lubrication pump Chip collecting plate Coolant device Redpfx Aepxm Anofzon Operating instructions THE MACHINE IS IN A VERY GOOD CONDITION !!!

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Rjdpsw Agxrsfx Afzsn Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!