Used tools (pneumatic) for sale (25)

Condition: new, Einhell compressed air accessories bundle worth 13,500 euros is for sale. 4 pallets full of Einhell compressed air accessories. Cgodpfxjrl Sk Ij Af Don We would be happy to send you a list of the items.

Condition: used, pneumatic corner drill, compressed air drill, compressed air angle drill, corner drill -Manufacturer: Chicago Pneumatic, pneumatic angle drill -Type: CP-0323-TANAR -Operating pressure: 6.2 bar max. Cedpfx Aslw Az Ajf Djgn -Speed: 175 rpm -Dimensions: 790/260/H110 mm -Weight: 11 kg

Condition: used, pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder Codpod Scptsfx Af Dsgn -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Condition: used, pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -for discs: Ø 50 mm -Speed: max. 18,000 rpm -Case with: accessories -Dimensions: 430/360/H90 mm -Weight: 2.2 kg Cgedpfsd R Ikasx Af Don

Condition: new, Equipment: compressed air system, Refrigeration dryer, condensate drain, oil-water separator, and pre-/fine filter For use in environments where compressed air quality as well as durability and efficiency are essential V-belt drive Long service life thanks to two-stage high-performance compressor units with low speed Specially machined cast iron cylinders for minimal oil consumption and long service life Optimal cooling via large fan wheel Motor with overload protection Easy condensate drainage through standard 1/2" ball valve Supplied as standard with Condor pressure switch and pressure gauge Supplied as standard on safety base pallet with vibration dampers Tank manufactured according to German AD 2000 regulations Intake capacity: 650 l/min Filling capacity: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Cgedpowwi Acsfx Af Dsn Speed: 920 rpm Motor output: 4 kW / 400 V

Condition: good (used), pneumatic angle grinder, Flex, grinding wheel, cut-off grinder, cut-off grinding machine, angle grinder Csdpfx Afeb A Intj Dsgn -Max. discs: Ø 178 mm -Speed: max. 8500 rpm -Number: 74 angle grinders available Price: per piece -Weight: 4 kg/piece

Condition: good (used), pneumatic angle grinder, Flex, grinding wheel, cut-off grinder, cut-off grinding machine, long-neck rod grinder, pin grinder -Manufacturer: Swepro, pneumatic long-neck rod grinder -Type: SW 7433M -Speed: 14600 rpm -Hole: Ø 6 mm -Dimensions: Ø 48 x 400 mm -Weight: 1.7 kg Codox E S Taspfx Af Degn -

Condition: new, Compressed air strip nailer 6512/130 SQ for nails up to 130 mm long Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battens, crate and pallet construction, fence construction, load securing, etc. - Single release - For paper-loaded safety strip nails - Eurocode 5 nails in accordance with DIN EN 14592 - User-friendly driving depth adjustment - Robust and powerful - Optimally silenced and balanced Technical data: - Release type Single release - Air consumption per driving operation 5.40 liters - Nail lengths from 90 to 130 mm - Nail diameter 3.4 - 4.2 mm - Nail series 34° safety strip nails - Magazine capacity 75 nails - Weight 6.60 kg - Length x width x height 470 x 150 x 460 mm The nailer is new and unused. Only traces of storage may be present, as the device was hanging in our showroom. Csdpfx Asvcl Slof Degn You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Condition: new, Clamping device PN 91120 D - single release Higher pull-out values and smaller edge distances than with round-headed nails - Ideal for battening, as less splitting effect - Universal due to large length range - Also for structural timber construction Technical details: - Staple width: 11.76 mm - Wire dimension: 2.0 mm - Staple length: 65 to 120 mm Cedpovcmifjfx Af Djgn - Magazine capacity: 125 pieces - Air consumption at 6 bar approx.: 2.5 l/shot - Weight: 5.1 kg The stapler is new and unused. Only traces of storage may be present, as the device was hanging in our showroom. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 6151710200, Demo tool with only 2 operating hours: Chicago Pneumatic CP4210AS push riveting machine with short alligator head Take advantage of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Experience the benefits of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Year of manufacture: 2025 Technical specifications: Max. compression force (90 psi/6.2 bar): 13.3 kN Max. piston stroke: 15.9 mm Height: 92 mm Length: 233 mm Weight: 1.7 kg Jaw type: Alligator short Main material: Aluminum Max. rivet size aluminum (in): 1/8 Max. rivet size aluminum (mm): 3.2 Max. rivet size steel (in): 3/32 Max. rivet size steel (mm): 2.4 Starting system: Safety lever Air inlet thread size (in): 1/4 Air inlet thread size: NPT Max. working air pressure: 6.3 bar Csdpfjxwu Rcex Af Dogn Min. hose diameter (5 m hose length): 0.38 in Min. hose diameter (5 m hose length): 9.5 mm Visit our store; we always have a wide selection of Pneumatic tools for industry and trade in stock.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 6151740170, Exhibit: Cgsdpoxwpitefx Af Dsn Chicago Pneumatic Air Chisel Hammer GV 5 Strokes per minute: 2400 Stroke: 52.5 mm Chisel shank: Hexagonal 19 mm Air consumption under load: 8.3 l/s Power: 12.2 Joules Weight: 5.1 kg Overall length: 385 mm Air inlet: G 1/2 Specifically designed for heavy-duty industrial applications, the GV5 hammer combines powerful blows and an efficient impact frequency with a robust design. Thanks to its metal housing, large stroke volume, and high impact rate, the GV5 offers maximum performance and durability simultaneously. It is therefore ideal for roughening, chiseling, or cutting tasks.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-085AAV, Chicago Pneumatic Angle Turbine Grinder CP3T30-085AAV with autobalancer with spindle lock Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 8500 min-1 Max. power: 2.3 kW Cgjdpjxwn R Ajfx Af Djn Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Weight: 2.1 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: ready for operation (used), Speed range up to: 12000 rpm Power at 6 bar compressed air: 900 W Cgedpfx Afjd Iatio Djn Stitch length (length of extension): 1000 mm thread outlet: 45 with collet: 6 mm

Condition: excellent (used), Pneumatic screwdriver PT72 2000 Nm System Norbar Mod. 18033, PT72, NP 4985 € Codpfjfhqmbjx Af Djgn Condition: Used. Shipping package up to 12 kg. Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Mäder DLP 1700 HV Direct-acting compressed air press Press Direct-acting compressed air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing in pins, bushings and ball bearings or when deforming. DLP 1700 HV Direct acting compressed air press Pressure force at 6 bar: 17 kN Working stroke: H mm: 40/60/80 More articles - new and used - can be found in our shop! International shipping costs on request! Csdpfx Aod Tam Nef Dogn

Year of construction: 2008, operating hours: 10 h, condition: as good as new (ex-display), machine/vehicle number: 2051462294, Demonstration tool: Desoutter Impulse Wrenches PT040-T6000-S10S shutt-off, Free speed: 6000 rpm Drive: 3/8" square Torque: 16 till 29 ft.lb Cjdpfocpd D Djx Af Djgn Length: 7.0 in. Weight: 3.0 lb

Year of construction: 2011, operating hours: 50 h, condition: used, machine/vehicle number: 6151704890, Demonstration tool : Desoutter Angel Grinder KA26085B7V Free Speed : 8500 rpm Grinding wheel maximum : 7x3 in. / 8x7 / 8 spindle thread : 5/8-11 Power : 2.82 hp Weight : 5.9 Ib. Cgedpfjcpbf Sjx Af Djn

Year of construction: 2011, condition: as good as new (ex-display), machine/vehicle number: 2011, From our demonstration tool inventory: Codpfxecp It Dj Af Dogn Desoutter PT450-T3000-S19S impulse wrench with shut-off function The tool is fully functional and has been tested. Free speed: 3000 rpm Drive: 3/4" In. Torque: 166 till 332 ft.lb Length: 8.0 in. Weight: 9.5 lb

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Cgodpfxev Im Nco Af Den Weight: 1.0 kg Other tools for industrial production and maintenance on request.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-120AA5V, Chicago Pneumatic Angle Turbine Grinder CP3T30-120AA5V with autobalancer with spindle lock with tool-free adjustable protective cover Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 12000 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Grinding wheel Ø outside max.: 125 mm Weight: 2.4 kg Spindle Thread: M14 Air connection: IG 3/8" Cgodjvptx Tspfx Af Don min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 5412105764, new Fuji impulse wrench FLT-5-3 BF EC shut-off, Idle speed: 6500 min-1 Abrasion: 3/8" square Torque range: 11-24 Nm / 97-212 in.lb Cjdpsv Iplgofx Af Degn Length: 181 mm Weight: 0.97 Other tools for industrial production and maintenance on request.

Year of construction: 2021, condition: as good as new (ex-display), machine/vehicle number: 5412105639, new Fuji impulse wrench FLT-9-3 BF ES switch-off, Idle speed: 4800 min-1 Abrasion: 1/2" square Torque range: 45-85 Nm / 398-752 in.lb Cgodpfxov Inf Ss Af Djn Length: 209 mm Weight: 1.6 Other tools for industrial production and maintenance on request.

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Cjdpfx Afsv Imyue Dogn Idle speed: 2200 min-1 Length: 212 mm Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, From our demonstration tool inventory, tested and fully functional: New CHICAGO PNEUMATIC CP5080-4200H18K Universal and versatile belt sander set (new & unused) with 3 different sanding arms: Paper belt width: 13 x 457 mm 16 to 19 x 475 mm 3 to 13 x 457 mm Included in the set: Belt sander CP5080-4200H18 1 x protective cover without handle 1 x handpiece 8 x sandpaper 1 x sanding arm 13 x 457 mm 1 x sanding arm 16 to 19 x 475 mm 1 x sanding arm 3 to 13 x 457 mm 1 x carrying case Cgjdpsv U Ad Nofx Af Dsn Advantages: The sanding head can be rotated 360° to adapt to the working position Easy changing of abrasives and Low contact Simple and robust design Technical specifications: - No-load speed: 20,000 - Power: 400 W - Paper tape width: see above under Scope of delivery - Total length: 340 mm - Weight: 1.3 kg Other tools for industrial production and maintenance are available upon request.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: GAT823-450BX, Deprag Angle Turbine Grinder GAT 823-450 BX demonstration tool Lever valve with locking startup Technical specifications: Free speed: 6600 rpm max. Power: 6,03 hp max. Grinding wheels Outside diameter: 9,05 in. Weight: 4,0 kg Spindle Thread: M 14 Air connection : IG 1/2 " Cgodoctlybjpfx Af Djn