Batch Mixer

m-tec MR 150V

Condition: used, mileage: 156,700 km, power: 265 kW (360.30 HP), first registration: 12/2005, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2023, color: orange, gearing type: semi-automatic, emission class: euro3, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2005, Equipment: ABS, air conditioning, ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ Mercedes Actros 2536 L 6x2 Wiedemann enviro tec, Super 2000 6.0/5.0, Water Recovery Unit Body * Wiedemann enviro tec * Super 2000 6.0/5.0, with water recycling * 11,000 litre tank capacity * 1,000 litre fresh water tank * 5,000 litre flushing water tank * 6,000 litre sludge volume * Emptying via 45° tiltable tank Vacuum System * Wiedemann & Reichhardt KW 2000 * Approx. 2,000 m³/h * Approx. 25m suction hose DN 125 * Suction pipe DN125 with sewer folding cover High-Pressure System * URACA KD 716 G65 approx. 340 l/min at 175 bar * Approx. 180m HD hose DN25 * Hydraulic high-pressure hose reel with approx. 60m DN 13 Additional Freshwater System * Speck NP 25/50-120 delivering 50 l/min at 120 bar * Spring-loaded hose reel with 15m pressure hose DN10 Special Features * Sludge tank made of material 1.4301 (stainless steel) * Suction and high-pressure booms * 5 litre hand washing unit with hot water * Stainless steel toolbox * Control cabinet without display * Engine start can be activated from the control cabinet * NMV start can be activated from the control cabinet Codpfx Adexa T Rtjgsrd * Radio remote control with display * Equipment cabinet with two flaps – on both sides * Hose storage compartment * Extended sound insulation for the pump compartment * Work lights * Central lubrication system Technical Data * Unladen weight: 16,920 kg * Gross vehicle weight: 26,000 kg * Length: 11,400 mm * Height: 3,600 mm * Width: 2,550 mm Special Equipment: Engine tunnel storage, front axle load 9.0 t, audio system: Radio Truckline CD 65 / 70 incl. CD player, exhaust raised behind cab, battery 220 Ah, hands-free telephone system, rear axle H 7, 13 t, crown wheel 300, comfort central locking, fuel tank: 400 litres aluminium, reinforced cooling, additional air compressor, PTO independent of gearbox, MB 2C PTO, programmable special module, rotating beacon left/right, reverse warning signal (external), electric sliding/tilting glass sunroof, cab seats: co-driver comfort air-sprung seat, cab seats: driver comfort air-sprung seat, sun visor, voltage converter 24V / 12V 15A, 12V socket, Telligent steered trailing axle, front underrun protection, gearbox oil cooler Other Equipment: Euro 3 emissions standard, axle configuration: 6x2, 2-line trailer brake, electrically adjustable and heated exterior mirrors, outside temperature display, rear axle differential lock, cab: suspension for rough terrain (6.0 HZ), cab: M (medium length), suspension: leaf/air, generator 80A, 16-speed gearbox, cabin filter: pollen filter, chassis/body: chassis, engine 12.0 litre – 265 kW V6 diesel (OM 501 LA), engine brake with constant throttle, single tyres on trailing axle, disc brakes, Telligent brake system with ABS+ASR, CB radio pre-installation, pre-installation telephone/fax, dropped front axle, immobiliser, heat insulating glazing, central locking with key For further detailed information and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and specifications of the equipment. Sale is exclusively subject to our terms and conditions and with exclusion of any warranty.

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Credpfx Adsir E E Eogjd Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Total height: mm 5600 Loading width: mm 1900 Loading length: mm 3060 Total weight: kg 30,000 approx. With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Csdpsun Sx Sofx Adgjrd Length: mm 3000 Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Installed power: kw 5.5

Condition: used, mileage: 138,655 km, power: 100 kW (135.96 HP), first registration: 10/2005, fuel type: diesel, overall weight: 5,990 kg, next inspection (TÜV): 07/2028, color: orange, gearing type: mechanical, emission class: euro4, Year of construction: 2005, Equipment: air conditioning, Internal vehicle number: G300104 Available immediately at our yard in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Crsdpfjv Rt T Tjx Adgjd VIDEO: TV inspection system RCA RAUSCH ELKA 600 Year of manufacture: 5 See all features in the pictures and video. Financing example: * Internal number: G300104 * Purchase price: €29,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €468.31 * Residual value: €5,980.00 If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Crsdpfx Aoqi Eh Hsdgjd Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc.

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 Credjuak Nlspfx Adgsd System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Condition: used, mileage: 142,631 km, power: 353 kW (479.95 HP), first registration: 10/2005, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Internal number: #276 MAN TGA 32.480 8x2-6 BL Wiedemann enviro tec Super 2000, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 * Water recycling * 15,500 liter tank size * 5,500 liters of rinsing water * 10,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 4000 (water ring pump) * approx. 4,000 cbm/h * approx. 20m suction hose DN150 High pressure system * 2x URACA KD716 approx. 313 l/min at 160 bar * approx. 140m HP hose DN38 * Hydraulic flushing hose reel with approx. 40m DN16 Fresh water pump * Speck NP25 50/120 approx. 50l/min at 120 bar * Hydraulic flushing hose reel with approx. 40m DN13 Special features * Stainless steel sludge tank * Two high-pressure pumps (URACA KD716) * Suction and HP boom * Motor - start switchable from control cabinet * NMV - start can be switched from the control cabinet * Equipment cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump room raised * Central lubrication system Technical data * GGW 32,000 KG * Length 11,800 mm * Height 3,850 mm * Width 2,550 mm Chassis: Special equipment: Axle load front axle 9.0 t, battery 225 Ah, battery box, electric battery disconnect switch, operating hours counter, electrically adjustable and heatable curb mirror right, Comfortshift gearshift, flame-start system, heated fuel filter, fuel tank: 600 l aluminum, Eberspächer D4S auxiliary air heater, seat cover / upholstery: comfort quality, control module for external data exchange, reinforced front axle shock absorbers, front underride guard, offset front axle VOK-09 Further equipment: Axle configuration: 8x2, Trailer socket 24V / 7-pin, Trailer socket ABS, Anti-slip control (ASR), Electrically adjustable and heatable exterior mirrors, Exterior mirrors wide-angle and electr. adjustable and heatable, right, differential lock rear axle, EDC engine regulation, electronic brake system MAN-Brakematic, EURO 3 engine, cab: L, driver's seat comfort, tachograph, suspension: leaf / air, electric windows, generator 100 A, speed limiter 80 / 85 km/h, rear axle HY-1350, cabin filter: pollen filter, body/structure: Chassis, Rocker arm - brake EVB, Steering column (steering wheel) adjustable, Air compressor 1-cyl., Engine 12.8 ltr. - 353 kW diesel (D 2876 LF 12), Trailing axle NO-08, liftable, Radio preparation 24V, Disc brake rear axle, Disc brake front axle, Side guard, Side window, Front axle stabilizer, Plastic bumper, Rear underride guard, Electronic immobilizer, Central locking, Gross vehicle weight 32.00 t Codpovh H Hujfx Adgerd For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Year of construction: 2010, condition: excellent (used), KRAMER Gmbh Dust Collection Filter Year: 2010 Crsdpsh D E Rdefx Adgod Total capacity: 70,000 m3/h The system can be used independently as 2 filters, each with a capacity of 33,000 m3/h.

Condition: new, Container filling system / Conveyor system Crjdpfxeb Sp D Re Adgjd Rotating tower with a horizontally rotating and longitudinally movable conveyor belt on a sturdy, galvanized frame, mounted on a rotating bearing. Includes conveyor belt and vertical lift for the automatic filling of three large containers. PLC control Distribution conveyor, geared motor 2.2 kW / conveyor width 900 mm, axle distance 5500 mm Drive for rotating slewing ring 0.6 kW Rotation drive +/- 90 degrees Inclined conveyor, conveyor width 600 mm / axle distance 4000 mm / drive 1.1 kW Vertical conveyor, conveyor width 600 mm / axle distance 4700 mm / drive 1.1 kW Color according to customer requirements Made to order Price and further information upon request.

Year of construction: 2003, condition: reconditioned (used), Machine inspected. Disassembled and ready for container transport (2). Cedpfx Aeizkxwodgjrd Wear-resistant liners. New bearings. Throughput capacity of 160 tons per hour. 50 kW to 150 kW motor, depending on requirements. Current installed motor: 75 kW.