Conveyors

Klanke CBA 955

Condition: used, mileage: 316,423 km, power: 120 kW (163.15 HP), first registration: 05/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2010, Equipment: ABS, central locking, electronic stability program (ESP), had accident, soot filter, + RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #543 Mercedes Benz Sprinter 516 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Unit Installation: Rockstroh Drain Jet 100-2 * PTO from Sprinter * Pratissoli KF3 high-pressure pump * Pressure control automatic * Pressure control and safety valve * 1st hydraulic HP hose reel for approx. 120m DN13 * 2nd hydraulic HP hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000-litre water tank * Bypass control * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED rotating beacons * Various storage options * Vice * Wooden floor with coating, side panels clad in aluminium chequer plate Special equipment: 13-pin trailer socket, 100 Ah battery, additional (reinforced) battery, digital tachograph, 180 A alternator, transmission lock for PTO, rear door (opening angle 270 degrees), PTO 2B with output shaft, parameterisable special module, radio pre-installation, spare wheel with road tyres, spare wheel holder under rear frame including jack, cab seats: comfort suspension seat, driver side, reinforced rear stabiliser, reinforced front stabiliser, sender for auxiliary heating, separation relay for additional battery, preparation for additional heat exchanger, provision for transmission oil cooling, booster heater Iedexc S Atspfx Ahwstc Additional features: 3rd brake light, adaptive brake light, driver airbag, washer fluid level indicator, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated indicator, brake assist, braking system with ABS+ASR, roof lining in cab, lockable glove compartment, body/superstructure: standard high roof panel van, child safety lock, fuel tank: main tank 75 Ltrs., continuous bulkhead, load securing/lashing points, headlamp range adjustment, engine 2.1 l - 120 kW CDI CAT, wheelbase 3,665 mm, smoker package, low emissions according to Euro 5 emissions standard, sliding right-side cargo/passenger door, seat cover/upholstery: Lima fabric, cab seats: adjustable passenger seat, Assyst maintenance interval display, heat-insulating glazing, permissible GVW 5.00 t, twin tyres on 2nd/rear axle For further detailed information and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to alterations, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our Terms and Conditions and with exclusion of any warranty.

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller Itodstgqlyopfx Ahwsc

Condition: good (used), Year of construction: 1989, Shredder +press +conveyor belt+silo complete Itsdpfx Aer Dvdkjhwoc

Condition: excellent (used), Year of construction: 2000, Rotor Width : 1350 mm Rotor Diameter : 370 mm Hopper dimensions : W 1350 x 1450 mm Hydraulic infeed draw, with 45 degree tilt Ijdpewf Sgmjfx Ahwjtc Engine size : 30 Kw Siewe : Ø 30mm Extra Siewe : Ø 20mm Screw conveyer : 5000 mm Extra set of knives included ( 40 x 40 mm, 4 sides ) Redler/chain conveyer : 5000 mm 45 degree angle with electro magnetic separator( nails/screws) 10 feet shipping container with control panel/hydraulic station inside Machine measures : L 3100mm ( +1000mm hydraulic draw ) x W 2100mm x H 4100 mm Complete unit still connected to power, can be examined in working condition

Condition: used, Year of construction: 2021, operating hours: 5,300 h, functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, rotor length: 3,200 mm, power: 310 kW (421.48 HP), rotational speed (max.): 100 rpm, rotational speed (min.): 20 rpm, If you are interested, just ask! Itedpfx Ajvt Suhehwsc

Condition: used, mileage: 80,000 km, power: 206 kW (280.08 HP), first registration: 07/1986, fuel type: diesel, overall weight: 16,000 kg, color: white, gearing type: mechanical, * Mercedes-Benz 1928 NG V8 4x4 * Uraca high pressure pump pipeline flushing device * Pipeline flushing device * EZ 1986 * 80.000 km * Double H Schlat transmission * Leaf-leaf suspension * 4x4 all-wheel drive * Wheelbase: 3.60 m * LGW: 15130 kg * Self-propelled working machine * Rexroth hydraulic unit Iedpfxsvi U Eho Ahwetc * Uraca KD412 high-pressure pump * Max. 915 L/min * Max. 240 bar * Max. 100 degrees * 80-400 KW power consumption

Condition: used, mileage: 156,700 km, power: 265 kW (360.30 HP), first registration: 12/2005, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2023, color: orange, gearing type: semi-automatic, emission class: euro3, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2005, Equipment: ABS, air conditioning, ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ Mercedes Actros 2536 L 6x2 Wiedemann enviro tec, Super 2000 6.0/5.0, Water Recovery Unit Body * Wiedemann enviro tec * Super 2000 6.0/5.0, with water recycling * 11,000 litre tank capacity * 1,000 litre fresh water tank * 5,000 litre flushing water tank * 6,000 litre sludge volume * Emptying via 45° tiltable tank Vacuum System * Wiedemann & Reichhardt KW 2000 * Approx. 2,000 m³/h * Approx. 25m suction hose DN 125 * Suction pipe DN125 with sewer folding cover High-Pressure System * URACA KD 716 G65 approx. 340 l/min at 175 bar * Approx. 180m HD hose DN25 * Hydraulic high-pressure hose reel with approx. 60m DN 13 Additional Freshwater System * Speck NP 25/50-120 delivering 50 l/min at 120 bar * Spring-loaded hose reel with 15m pressure hose DN10 Special Features * Sludge tank made of material 1.4301 (stainless steel) * Suction and high-pressure booms * 5 litre hand washing unit with hot water * Stainless steel toolbox * Control cabinet without display * Engine start can be activated from the control cabinet * NMV start can be activated from the control cabinet * Radio remote control with display * Equipment cabinet with two flaps – on both sides * Hose storage compartment * Extended sound insulation for the pump compartment * Work lights * Central lubrication system Technical Data Itodpjxa T Rtsfx Ahwsc * Unladen weight: 16,920 kg * Gross vehicle weight: 26,000 kg * Length: 11,400 mm * Height: 3,600 mm * Width: 2,550 mm Special Equipment: Engine tunnel storage, front axle load 9.0 t, audio system: Radio Truckline CD 65 / 70 incl. CD player, exhaust raised behind cab, battery 220 Ah, hands-free telephone system, rear axle H 7, 13 t, crown wheel 300, comfort central locking, fuel tank: 400 litres aluminium, reinforced cooling, additional air compressor, PTO independent of gearbox, MB 2C PTO, programmable special module, rotating beacon left/right, reverse warning signal (external), electric sliding/tilting glass sunroof, cab seats: co-driver comfort air-sprung seat, cab seats: driver comfort air-sprung seat, sun visor, voltage converter 24V / 12V 15A, 12V socket, Telligent steered trailing axle, front underrun protection, gearbox oil cooler Other Equipment: Euro 3 emissions standard, axle configuration: 6x2, 2-line trailer brake, electrically adjustable and heated exterior mirrors, outside temperature display, rear axle differential lock, cab: suspension for rough terrain (6.0 HZ), cab: M (medium length), suspension: leaf/air, generator 80A, 16-speed gearbox, cabin filter: pollen filter, chassis/body: chassis, engine 12.0 litre – 265 kW V6 diesel (OM 501 LA), engine brake with constant throttle, single tyres on trailing axle, disc brakes, Telligent brake system with ABS+ASR, CB radio pre-installation, pre-installation telephone/fax, dropped front axle, immobiliser, heat insulating glazing, central locking with key For further detailed information and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and specifications of the equipment. Sale is exclusively subject to our terms and conditions and with exclusion of any warranty.

Condition: used, mileage: 309,800 km, power: 315 kW (428.28 HP), first registration: 05/2001, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2025, color: white, gearing type: semi-automatic, emission class: euro3, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2001, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Actros 2543 6x2 Wiedemann Super 2000 10.0/6.5 Water Recovery Vehicle #509 Body Wiedemann enviro tec Super 2000 10.0/6.5 water recycling system 10,000 liter tank capacity (sludge) 6,500 liter clean water tank (flush water compartments) Itsdpfewtwwmsx Ahwec Discharge by tilting the tank 45° Vacuum System Wiedemann & Reichhardt KW 3000 Approx. 3,000 cbm/h, approx. 20 m suction hose DN 150 Suction pipe DN125 with channel nozzle High Pressure System URACA P3-45 G 70 approx. 475 l/min at 150 bar Approx. 200 m high-pressure hose DN32 Hydraulic high-pressure hose reel with approx. 60 m DN13 Special Features Suction and HP boom 5 liter hand-washing station Stainless steel toolbox Analog control cabinet Radio remote control Tool compartment - left Hose storage Pump compartment sound insulation (extended) Work lights Central lubrication system Waste bin Various brackets Cold water hand-washing device Cable winch Rotating beacon front and rear Technical Data Unladen weight 17,850 kg Gross vehicle weight 26,000 kg Length 10,700 mm Height 3,950 mm Width 2,550 mm For further detailed information and/or pictures, please contact us directly. A large selection of further vehicles for SALE or RENT is available at: Specifications, prior sale and errors excepted. The buyer is obliged to independently verify the condition and equipment of the item. Sale exclusively according to our terms and conditions and without any warranty.

Condition: used, mileage: 138,655 km, power: 100 kW (135.96 HP), first registration: 10/2005, fuel type: diesel, overall weight: 5,990 kg, next inspection (TÜV): 02/2028, color: orange, gearing type: mechanical, emission class: euro4, Year of construction: 2005, Equipment: air conditioning, Internal vehicle number: G300104 German vehicle On our premises in Kaufungen - Kassel, available immediately More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English)   VIDEO:     TV Inspection System RCA RAUSCH ELKA 600 Year of manufacture 2005 See entire equipment in pictures and video Ijdpfov Rt T Tjx Ahwstc   Financing example: * Internal number:      G300104 * Purchase price:      29,900.00 € * Down payment:      10% * Term:      60 * Monthly installment:      468.31 € Residual value:      5,980.00 € If you are interested in the offer or want to adjust this to your needs, contact us (Mr. Enchev). We look forward to your call     Errors excepted   We are happy to take your used vehicle in trade. Financing directly at our premises possible. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Iodpsuak Nlofx Ahwjtc Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.