Double-sided frame sanding machine

Loewer DSM 300

Condition: used, machine/vehicle number: 008431, X axis working area: 6360 mm Y axis working area: 1905 mm Working Table: Pod and Rail Number of controlled axes: 5 axes Credpfx Asym Rphjqtsh Total number of drilling spindles: 10 Total number of tool changer positions: 60

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Crsdpjv D Rg Djfx Aqteh Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: excellent (used), Year of construction: 1994, Device description: grinding top/bottom Codpfx Aewyb Ntjqtjrh working width 200mm electric adjustment of the upper unit star/delta start-up installed power 14kW pneumatic belt tensioning belt oscillation working height up to 150mm

Condition: excellent (used), Machine with dual electronic crossbar. Cedpfxjggyr Es Aqtorh

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Crjdpfx Ajx A Unxoqteh Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 26476, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 7,500 kg, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,000 mm, workpiece height (max.): 200 mm, grinding belt width: 1,350 mm, power of feed motor: 2,200 W, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,350 mm, Five-belt calibration and fine grinding system, top and bottom grinding for solid wood or wood materials Cedpfjvy Dt Nox Aqtorh Factory overhauled to the latest standard 5 sanding units (2x calibration roller top / bottom + cross sanding unit, 2x segment sanding pads, 1 of which includes a unique diagonal sanding unit (patented KÜNDIG Brilliant technology)), as well as the KÜNDIG Enormatic control for automatic workpiece feeding. Machine completely overhauled - for more information see appendix

Condition: used, machine/vehicle number: 008473, X axis working area: 5000 mm Y axis working area: 1640 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36 Crodpfx Aqeywaf Isteh

Year of construction: 2014, condition: used, Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt Csdpfxex Dng De Aqterh 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, machine/vehicle number: 007614, Max. machining width: 1300 mm Cjdpfxex A Tato Aqterh Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: excellent (used), Year of construction: 1997, Wide belt sanding machine HEESEMANN LSM 8, year of manufacture 1997 Csdpsxurxfsfx Aqterh