Insulating glass making machine

Lisec

Condition: good (used), The blades are sharp and have seen little use. 1 pack / 3 saw blades Application: Automatic bending machine / Lisec, BSV-45, etc. Diameter: 200 mm Lrodpfezg Ay Dsx Am Ton Weight: 566 g Condition: good, second-hand

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Ledpfx Asv Eguysm Tjrn Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025.

Condition: used, functionality: fully functional, LISEC PVB Lamination Line Composed of: TERRUZZI Autoclave – Year 2007 Washing Machine LISEC HVM26B6 – Year 2015 White Room Ledsy I Sd Ropfx Am Torn Mangle Dimensions 5500x2800 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 30,500 mm, total width: 4,000 mm, total height: 3,250 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, space requirement length: 305,000 mm, space requirement height: 3,800 mm, Equipment: documentation/manual, Lisec IG line, year 2005/2007, running direction left to right, featuring maximum element dimensions of 4000 x 2500 mm, stepped units (front/rear/top 140 mm) with gas filling press and sealing robot: Lrodjzfy Uvjpfx Am Ton - RTVN-32/25WE, inlet conveyor of washing machine, year of manufacture 2007, 3.2 m - RTL-25VN, washing machine with 6 brushes for Low-E glass, with hot water tank, sand filter and blower, partially overhauled, built in 2007, 3.3 m - RTVN-16/25ST, washing machine outlet conveyor, built in 2007, 1.6 - RSVN-38/25, frame set section, 3.8 m - RTVN-27/25, measuring zone for gas-filling press, built in 2005, 2.7 m - FPS-36/25US, argon gas-filling press, built in 2005, 4.1 m - RTVN-11/25ST, outlet conveyor 1 of gas-filling press, year of manufacture 2005, 1.1 m - RTVN-11/25ST, outlet conveyor 2 of gas-filling press, year of manufacture 2005, 1.1 m - APKV-4/25, combination of 4-track cork applicator and short-inlet conveyor if sealing robot with width scanning device for glass/frame, year of manufacture 2005, 1.6 m - VFL-1D/25, sealing robot for PS and SI (can seal unit with 2 different kinds of material), year of manufacture 2005, 8.0 m - DOS-1PS+SI, year of manufacture 2005 (located in front of the line, so does not count towards the total length) The total length of the line is around 30,5 m The machines are in very good condition and are available from our stock in Austria/Hungary. Gas filling press can be seen in our warehouse in Austria but the washer is currently still under reconditioning in Hungary.

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm Lrodpfxeyfrvyo Am Tjn NC controlled Very good and clean condition Surplus drilling/countersink bits included As is Available immediately

Condition: good (used), Includes key for emergency stop switch Application: Lisec machines Width: 450 mm Height: 320 mm Depth: 80 mm Lrjdpeyr Nidofx Am Tsn Weight: 1774 g Condition: Good, second-hand

Condition: excellent (used), Year of construction: 2006, 2-component extruder Originally built for Silicone, but used for Polysulphide Can be easily made to work with Silicone Lodpfx Ajzdyvwsm Tsrn Hydraulic More technical information can be found attached as Tech. data file Excellent condition Good working order, tested As is Available immediately

Condition: used, grinding length 1000 mm grinding width 300 mm Lrsdpfx Aeu Dn Txsm Tjn workpiece height 230 mm table surface area 1000 x 240 mm x-travel 1000 mm y-travel 270 mm z-travel 350 mm grinding wheel diameter 240 mm grinding spindle speed 2180 U/min table speed -stepless- 3 - 30 m/min total power requirement 4,5 kW weight of the machine ca. 2,8 t dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment

Condition: excellent (used), Year of construction: 2007, Automatic spacer bar bending machine With profile magazine Possible to bend aluminum, steel and warm-edge (plastic) spacer bars Universal bending tool for aluminium up to 24 mm All shapes according to LISEC shape catalogue The kit includes a Domino A-100 ink-jet printer More technical information can be found attached as Tech. data file Very good and clean condition Good working order, tested See video As is Lodpfezdynmjx Am Torn Available immediately

Condition: good (used), Year of construction: 1995, Semi-automatic edge decoating system, Working height: 900 mm. Width: 1400 mm, depth: 1200 mm, Max. Height: 1490 mm (up to operating terminal), Weight: 180 kg. Lredpfx Amsridqxs Tsn

Condition: good (used), Year of construction: 2008, 10 cup wheels vertical glass edging machine with variable angle 0-45° total number of woreking meters : 179.000 min. glass size height : 70 mm speed : 0,5 - 5 m/min. Lodpex Hvxpofx Am Torn glass thikness : 3 - 50 mm machine dimensions : L x W x H : 8,8 x 1,2 x 3 m weight : 4300 Kg

Condition: good (used), Power supply: 24 VDC Application: Lisec machines (AKL) Width: 425 mm Lrodjzcvd Nspfx Am Tsn Height: 160 mm Depth: approx. 30 mm Weight: 1402 g Condition: good, second-hand

Condition: good (used), Version includes key switch Application: Lisec machines Width: 425 mm Height: 30 mm Depth: 160 mm Lrodpezb Enhjfx Am Ton Weight: 1096 g Condition: good, second-hand

Condition: used, Year of construction: 1990, grinding length 900 mm grinding width 510 mm workpiece height 400 mm table surface area 800 x 400 mm longitudinal feed of the table max. 980 mm table speed -stepless- 1 - 35 m/min grinding wheel size 355 x 51 x 127 mm cross feed of the table 460 mm cross feed 1 - 40 mm/Hub vertical feed autom. 0,005 - 0,04 mm/Hub rapid traverse vertical 0,5 m/min grinding spindle speed 1450 U/min Lsdjtqqm Ajpfx Am Torn grinding spindle drive 5,6 kW table load capacity max. 1000 kg total power requirement 10 kW weight of the machine ca. 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 12,100 mm, total width: 2,300 mm, total height: 3,250 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Lisec gas filling press FPS-36/25US, year 2005, consisting of following components: RTVN-27/25MZ, measuring section for gas filling press FPS-36/25US, gas filling press for Argon RTVN-32/25ST, outlet conveyor 1 of gas filling press RTVN-22/25ST, outlet conveyor 2 of gas filling press RTVN-16/25ST, outlet conveyor 3 of gas filling press Lsdpfx Ajzbdbmsm Tsrn The line machine was working until dismantling date and will be available from current location end of June 2026.