Four sided planers Kupfermühle 1980

Kupfermühle

Condition: used, Year of construction: 1988, Planing width: 860 mm, clearance height: 200 mm, minimum clearance height: 3.0 mm, bottom motor: 18.5 kW, top motor: 7.0 / 10.0 kW Storage location: Nattheim Kedpfx Aaevvkc Aexjwt

Condition: used, REX four-sided planer, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles have 2 rotation speeds, electric table lifting device Kwjdpfsrxf Smox Aaxot

Condition: excellent (used), Catalogue number 7640 ADVANTAGES Kjdpsyaq Tasfx Aaxewt – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7662 TECHNICAL SPECIFICATIONS - max working width: 770mm - max working thickness: 200mm * top section: - toothed feed roller - ratchets - pressure - toothed feed rollers, 2 pcs - pressure - 4-knife planing shaft, 770mm, 7.5kW - pressure - smooth feed roller * bottom section: - adjustable infeed table - adjustable smooth feed roller - 4-knife planing shaft, 770mm, 5.5kW - 2 adjustable feed rollers in lower table - electric height adjustment - lifting motor approx. 1.5kW - 6 feed speeds: 6, 9.5, 12, 15, 19, 30 m/min - feed motor 3.2kW - extraction port diameter: 1x160mm, 1x200mm - dimensions (L/W/H): 1470x1800x1700mm - weight approx. 2500kg ADVANTAGES – German-made – very good condition – used planer Net price: 36,900 PLN Kwodpfx Asx Thcmjaxst Net price: 8,780 EUR Net price calculated at exchange rate 4.2 PLN/EUR (if exchange rate fluctuations are significant, the price may change)

Condition: ready for operation (used), Wide Planer Kwodjwg S Tvjpfx Aaxjt

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles Kwsdpfx Aex S Ngkjaxjt – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm Kjdpfxjx Sx S No Aaxowt - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Kwjdpfxjwfqh As Aaxst Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller Kodpfxsx Sx Sij Aaxowt From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: used, Empty weight: 6.000 kg Dimensions (LxBxH): 340 x 210 x 190 cm Price: On request - Documentation available: No - CE certificate present: No - Max. working width: 860 - Transport dimensions: 3400mm x 2100mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kwjdpjxbf Iaofx Aaxst Yorick Diebels

Condition: excellent (used), max planing width 770mm max planing height 200mm additional 5 spindle 220mm Kwodpov H U Nbofx Aaxot

Condition: good (used), Year of construction: 1989, functionality: fully functional, planing width: 2,050 mm, height adjustment type: pneumatic, planing height: 300 mm, four-side planer, width: 2200 mm, on a rotary table for curved pieces, enclosed machine Kwsdow A A Ebopfx Aaxot

Condition: as good as new (ex-display), feed length X-axis: 800 mm, planing width: 800 mm, Double-sided planer. In very good working condition. Kwedpfx Ajx Rrykjaxst

Condition: ready for operation (used), max working width 500mm max working height 200mm height of side heads 10cm Kwjdpew Afkyofx Aaxet changenable side heads 2-knives shafts roll in the table manual adjustment of side heads two feed speed additional spindles in the outfeed

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed Kwedpfx Aaewtp U Rexot - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)