Kolbus board cutter PK 170 (2000)

Kolbus PK 170

Condition: new, Year of construction: 2025, Guowei 68 - available immediately on stock in Europe Product Description： Cutting knife and paperweight are controlled by hydraulic transmission. Fully hydraulic drive makes the machine more secure and imported hydraulic parts ensure the stability of the system. The machine has the function of a reference setting and keeping, and the effectiveness of the reference and self-diagnostic function; infrared protection and hands button interlock protection device; precise paper pusher guide, high precision of alignment and rear angle. Computer system adopts 10-inch colorful full-touch screen, servo motor driven,. The data resolution is 0.01mm, with self-diagnostic function and operation mode display, 100 program groups, more than 10,000 different cutting positions, dynamic tracking, max paper pushing speed 5-10 m / min, and it has imported hydraulic components; electric components from France, Japan, Korea. Its key parts adopt imported bearing of low maintenance. Model / Specifications 68 Cutting width(cm) 68 Max.cutting height without assistance pressing plate(cm) 8 Max.cutting depth(cm) 68 Min cutting depth without assistance pressing plate(cm) 2 Extended length of working table(cm) 53 Kedpfou Rz S Iox Af Sjfa Height of working table(cm) 92 Machine width including side working table(cm) 126 Total length of working table(cm) 150 Cutting speed(r/min) 20 Max. Paper pressure(n) 10000 Power of main motor(kw) 2.2 Servo Motor for paper feeding(kw) 0.4 Machine weight(kg) 800 Overall dimension(L × W × H)(cm) 167*137*172

Condition: used, Year of construction: 2011, Three knife trimmer Wohlenberg Trim-Tec 45i Kfsdpfx Aswpfv Ajf Sea Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Cardboard scissors working width 110cm, in a good condition, immediately available Kedpfx Aeh S H Itof Ssfa

Condition: excellent (used), Year of construction: 2010, Polar 115 XT cutter Year of manufacture: 2010 Jogger (other manufacturer) Elevator (other manufacturer) Cutting length: 115 cm Infeed height: 16.5 cm Infeed depth: 115 cm 15” TFT color display - Complete electrical equipment - Work area lighting / optical cutting line indicator - Lockable main switch (without key) - Automatic motor start - Nickel-plated table surface / side guides - Air table with blower - Cover plate for the pressure beam - 2 HSS knives in a safety container - 10 knife change strips - Program memory for up to 1998 programs - 3 measuring systems: metric / inch / shaku; switchable - Fraction value input with automatic conversion to decimal system - Automatic entry of single dimensions (positioning) - Automatic dimensioning via program control - Repeat counter with operator guidance (Eltrotakt) - Electronic calculator (basic arithmetic functions) with memory function - Adjustment of pressure application - Variable, programmable size for material infeed and ejection - Programmable pressing without cutting - Knife automatic (knife automatic active) – automatic cutting sequence start for a series of cuts - Knife automatic (knife automatic ready) – cut release by briefly pressing the cut buttons - Variable pre-pressing time to optimize cutting frequency depending on material type - Programming during the cutting process - Program protection against unintended deletion - Pedal-controlled air table switch-off - Dimension correction for knife thickness tolerance - Automatic diagnostics with fault message display - Inter-service cut counter Kfodpfx Aexx Rmcjf Sja - Toolbox with comprehensive set of tools, instruction manual, spare parts catalog, electrical schematic - Left/right side tables with air cushion, 100 x 100 cm - Rear table cover

Condition: used, Year of construction: 2006, Year: 2006 Condition: good Configuration: - air tables - side tables - safety sensors Kedpfx Aeww Ey Dof Sjfa Specification: - MAX width: 92 mm

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Kedpfexd U Sajx Af Sjfa Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: used, Year of construction: 2011, Machine number 8161027 Built in 2011 Max. paper length 12 cm Max. paper width 78 cm Air table Yes Side table left Yes Kodpjxx Tu Aofx Af Sefa Side table right Yes Photo cells Yes Length x width x height 2000.0 × 2280.0 × 1700.0 Weight 1300 kg

Condition: excellent (used), Year of construction: 2014, Films up to 137 cm UV DRYER FCD-01 Kfodpoxcamysfx Af Sea (S. No.: 82252 // Age: 2008)

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Kfjdpfxjvqbhlj Af Sea Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Year of construction: 2004, condition: good (used), Offer consisting of: Polar RA-4 jogger, year of manufacture 2004, with delivery roller. Kedpexwqw Ejfx Af Sofa