Automatic Loading Panel Saws

HOLZMA HPL 430/43/22

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Max. panel length: 4300 mm Bwodpfx Asx A Tk Eebbew Main saw blade projection: 75 mm No of Grippers: 9

Condition: used, machine/vehicle number: 005106, Max. panel width: 4300 mm Max. panel length: 4250 mm Main saw blade projection: 95 mm Bodpfx Asyg Edmobbsww

Condition: used, machine/vehicle number: 008363, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Bwodpfxex Swdds Abbow Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2018, machine/vehicle number: 0-250-82-8302, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, controller manufacturer: HOMAG powerTouch / PC86, HOMAG DRILLTEQ V-500 / BHX 200/D – Year of manufacture: 2018 Vertical CNC machining center for drilling and milling operations. Equipped with dowel feeder and tool changer magazine, as shown in the inspection photos. Machine number: 0-250-82-8302 Control system: powerTouch / PC86, as shown in the screenshot Software: woodWOP 7.1, as shown in the screenshot from 22.10.2026 Meter readings according to the screenshot from 22.10.2026: Main usage: 2,885.92 h Total operation time: 6,789.99 h Bwodpfx Aj Agxfrebbow Photos of the meter readings and software are part of the image gallery. Electrical connection: 400 Y / 230 V, 3 phases, 50 Hz; neutral conductor required Maximum operating current: 29 A Fuse rating: 35 A Control voltage: 24 V Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal will take place between December 8th and 18th, 2026, after coordinating a date. Price on request. Detailed spindle configuration, working areas, software/license scope, and delivery scope will be determined after consultation. Windows version still to be confirmed. Subject to change and errors.

Condition: excellent (used), Year of construction: 2019, Panel saw SCHELLING FH4 with turning device and panel storage system. Bjdpfxjzfavyj Abbjww

Condition: used, machine/vehicle number: 008697, X axis working area: 3200 mm Y axis working area: 1250 mm Main Electrospindle power: 6.5 KW Number of controlled axes: 4 axes Bjdpfx Abozruzqebeww Total number of drilling spindles: 43 Total number of tool changer positions: 8

Condition: excellent (used), Robland Z320 panel saw 320 cm carriage, 0-45 degree tilt, and manual height adjustment of the saw blade Bwjdozu Iz Njpfx Abbsw right-hand fence adjustable manually up to 1370 mm, 0.75 kW scoring saw, 5.5 kW motor max. blade diameter 400 mm. 3 cutting speeds Very good condition, ready for work.

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Bodjzn N Ikjpfx Abbsww

Condition: new, Year of construction: 2025, functionality: fully functional, power: 20 kW (27.19 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 4,300 mm, table width: 4,300 mm, warranty duration: 12 months, Equipment: scorer, New Panel Dividing Saw / Saw Center – New Machine For sale is a new, high-performance panel dividing saw (saw center) designed for the industrial processing of wood-based materials, particle boards, MDF, HDF, and coated panels. This machine stands out for its high precision, powerful drives, and fast feed rates—ideal for professional furniture manufacturing and interior fittings. Technical specifications: • Maximum cutting length: 4,300 mm • Maximum cutting width: 4,300 mm • Minimum gripper opening during cutting: 34 x 45 mm • Maximum cutting height: 110 mm • Feed speed, saw unit (work cycle): 95 m/min • Return speed (rapid traverse): 120 m/min Bwjdpfoyhhx Ajx Abbjw • Feed speed, program pusher: 95 m/min • Main saw blade: Ø 450 mm (bore 75 mm) • Scoring saw blade: Ø 200 mm (bore 50 mm) • Main motor power: 18.5 kW • Scoring unit power: 2.2 kW • Program pusher power: 2 kW • Saw carriage power: 2 kW • Total installed power: 33 kW • Pneumatic working pressure: 0.6 MPa • Number of clamps: 12 • Machine dimensions (LxWxH): 7,901 x 6,656 x 1,890 mm • Weight: 7,200 kg The machine is brand new and immediately available for operation. Ideal for series production as well as flexible custom manufacturing.

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Bedeu Rc Hyspfx Abbjww Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37)