Granulation Mill

Herbold

Condition: used, HERBOLD Zigzag Separator (Gravity Separator) Type SZS 630/212 Separation channel: 630 mm wide With 7.5 kW blower Material: ordinary steel With inlet cyclone and rotary valve Godpoyhnlisfx Afaotu

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Gtjdpfjvgrh Usx Afaou Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Year of construction: 1988, condition: ready for operation (used), The offer includes: Infeed conveyor by Herbold Metal detector by S&S Granulator by Herbold Gtsdpfsyi Hbfsx Afaeu with 8, 10, and 12 mm screen baskets Control cabinet with overload protection

Condition: used, machine/vehicle number: 13275, Rotor diameter: 800 mm Rotor width: 600 mm Rotor knives: 7 Stator knives: 3 Gedpfx Ajwikagsfastu Feed opening approx. 800 x 580 mm Drive motor: 110 kW For pipes and profiles up to 6 meters in length.

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Gsdpfx Ajlhqd Rjfaetu Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025

Year of construction: 2016, condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Gtedjubyyvjpfx Afaou

Year of construction: 1988, condition: good (used), functionality: fully functional, The offer includes: Herbold feed conveyor, S&S metal detector, Herbold granulator with 8, 10, and 12 mm screen baskets, 7.5 kW extraction fan made from Hardox, dedusting system with cyclone and rotary valve for separating fines from the ground material, transfer fan for Big Bag filling, Big Bag station for two Big Bags with pneumatic switching, and control cabinet with overload protection. Gtjdpfxeygv Uis Afaou

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Gsdsunia Hepfx Afajtu

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Godpfoxgq I Nex Afajtu Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Gtsdpfx Afjxgrdfjaou Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 620 mm, filling opening length: 1,000 mm, total width: 2,380 mm, total height: 2,500 mm, total length: 6,625 mm, Including feed belt. The machine is immediately ready for operation. Gtedpjvaw T Asfx Afaju

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Gsdpfxexgrnqj Afajtu With feed device (pendulum arm) Drive power: 90–200 kW

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness Gtodpfx Ajxgr Rfofaeu

Condition: new, Year of construction: 2025, Motor power 7.5 kW - Cutting force 30 t Gtodpfx Afsltmi Soaeu Cutting channel designed for - max. roll length 1500 mm - max. roll diameter 1250 mm - Machine weight approx. 3800 kg - Tank capacity approx. 110 litres - Hand protection guard in the area of the control panel and opposite - Knife locking mechanism - Splitting table, straight design - Documentation supplied twice in German (1x printed, 1x USB) - Colour: RAL 5012 - light blue Protective guard/knife beam RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request

Condition: used, HERBOLD PU800 pulverizers Suitable for soft to medium-hard materials Used so far for fine grinding of plastics Diameter of grinding disks: 800 mm Gtodoxgtf Rjpfx Afaou Drive motor: 90 kw