PTW 140-1Selection eco

gwk

Year of construction: 2017, condition: like new (used), The two temperature control units from GWK were purchased and used solely for testing purposes. Both units have approximately 1000 operating hours. The units have been tested for functionality in my workshop. The price is per unit. Medium: Water Heating capacity: 9 kW Cooling capacity: 40 kW All other technical data available upon request! Pedpfezf Nzrsx Amusgn

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Pjdpou Eki Ssfx Amuogn Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Year of construction: 2016, condition: ready for operation (used), A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment. Psdezfp Huspfx Amujgn

Year of construction: 2014, condition: used, working temperature 30 ° Pedoxb Egcopfx Amuegn cooling capacity 7,4 kW fill weight 1,82 kg operating pressure 20/8,6 bar volume capacity 9,44 Kubikmeter/h volume capacity 2900 pro Min. volume capacity 28,5 bar weight of the machine ca. 160 kg dimensions 675 x 835 x 1250 mm

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Manufacturer: Busch Type: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: General overhaul Pgedpfx Aobrantemuon If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us.

Condition: used, circulating medium 25 °C Cooling capacity 10 kW Rated power supply 5,45 kW Operating/control voltage 400-415/24 V / 50 Hz Rated current/max. fuse 15,2 / 25 A The temperature control units are, in our assessment, in good used condition. The offer includes two units. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Pgedpfxszbc Hbo Amusn

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring Pgodpjm Dtm Ajfx Amusn - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Condition: excellent (used), Year of construction: 2007, Wanner C13.20 SV Slow Mill Year of production -2007 Power: 2.2 kW Description: Rotor knives: 9 Stator knives: 2 Rotor Ø: 130 mm Pgedpjw D R Hpofx Amujn Rotor width: 200 mm

Year of construction: 2014, operating hours: 150 h, condition: as good as new (ex-display), The temperature control unit from GWK is for sale; it was only used at trade shows. I would be happy to send you a description of the unit! Medium: Water / 30% glycol Pgsdpfx Asza U Dcomuon Heating capacity: 9 kW Operating temperature: max. 160 degrees Celsius Cooling capacity: 40 kW Cooling: Heat exchanger Mobile

Condition: ready for operation (used), 27 kW, 90 degrees Celsius Two units in stock. Warranty: 6 months. Pgsdpezab Sysfx Amusn

Year of construction: 2002, condition: good (used), For sale are 4 Getecha gate discharge mills with screw conveyor. Type: GRS 182 - A 2.29 Year of construction: 04/2002 Voltage: 400 Amperage: 2.29 Granulate sieve, diameter 5 mm Machine sales and purchases WE BUY / SELL PRODUCTION AND METALWORKING MACHINES, AND MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? Pgedpfx Amohzqzrouen For further information or contact options, please visit our website.

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Pgjdjy Su Aqepfx Amuen

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Pgsdpfx Aoy Su Adsmuen

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Pgedpfxoxykm Se Amujn Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, The teco th 140 temperature control unit from GWK with indirect cooling is up for sale; it offers a wide range of features which I can provide upon request. The hose lines are also included. The unit will be inspected by GWK prior to delivery, with inspection costs already included in the sale price. Pgedpfx Amex Dcd Rouen Medium: Heat transfer oil, Marlotherm SH Heating capacity: 27 kW at up to 350°C Cooling capacity, indirect: 110 kW Pump: 150 l/min at max. 7 bar Cooling via bypass with 3-way motorized controller Shut-off valve on supply and return Connection for PT 100 sensor Internal drip tray Dimensions: L: 1320 mm, W: 570 mm, H: 1720 mm Weight: 410 kg