Vertical Form & Seal Bagging Machine

Gainsborough VVF Bagging Machine VVF

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Nkedpfxstz H T Ds Aaxjt

Condition: used, Gainsborough bagger and All-Fill powder depositor. Nedpfx Aaevvpphexskt

Year of construction: 1990, condition: ready for operation (used), Was used for filling 10l milk bags, there is a second machine as a source for spare parts available. Nsdpsir U S Refx Aaxjkt

Condition: ready for operation (used), Year of construction: 1996, Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025. Nkedpfx Aaju Rc R Sexjt

Condition: new, Year of construction: 2025, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 55 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 5L (approx. 3kg powder); power supply and consumption: 220V, 1.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L1900xW1118xH2524mm; weight: 800 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Nksdpfxev Nkzxj Aaxot Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: as good as new (ex-display), Year of construction: 2018, Complete powder packing system for manufacturing and filling bags up to 25kg. The plant was purchased in 2017/2018 and has never been installed. The system comprises of the following equipment: 1 x Entecon 1000L stainless-steel powder storage tank. 1 x Entecon AMC blower conveyor with control box. 1 x All-Fill S10 powder filler with agitator and outfeed (2017). 1 x Gainsborough Engineering Co. GV5 vertical form, fill and seal bagging machine (2018) fitted with Markem Imaje Smart-Date X60 thermal printer. Sealing bars - 620mm (horizontal) and 800mm (vertical). 1 x Gainsborough Engineering Co. mobile outfeed conveyor. Infeed - 200mm. Outfeed - 1000mm.  1 x OCS Checkweighers GmbH HC check weigher (2017) to weigh up to 60kg. Type - HC. Weigh table dimensions - 1000mm long x 790mm wide. Footprint of full system (including space required to operate it safely) - 9m long x 4m wide x 6m high. Nsdpfxevlgq Ie Aaxjkt Please enquire for more photos and technical specifications about the system. Viewings welcomed.

Year of construction: 2025, condition: new, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 90 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 10L (approx. 6kg powder); power supply and consumption: 220V, 7.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L3420xW2200xH2688mm; weight: 900 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Nkedpfx Aajv Nkz Esxet Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Used Komptech Crambo 3400 E Static Shredder Year 2008 Very Tidy. Maintained To A Very High Level 125mm Screen Twin Shaft Shredding Unit Each Shaft Measures 9ft 3 Long 11ft Hopper Opening 1 x 160kW Electric Motor Integrated Electric Control Panel Unit Nksdpfx Ajvit Dioaxjt Automatic Lubrication System Comes With 8m x 1m Discharge Conveyor 18,500 Kgs Weight

Year of construction: 2023, condition: new, Semi-automatic auger filler for 100-5000g. Suitable for dosing and filling powdery products. Stand-alone version including screw conveyor and storage container. Also included are: horizontal screw conveyor to prevent undesired trickling, dust removal preparation, PLC control and touch monitor, weighing sensor (works automatically with each dose), bag clip mechanism, screw conveyor for 500 and 2000g doses, lid for screw conveyor so it is closed. Suitable for filling into bags, cans, glasses, other containers. - Specifications auger filler: hopper volume: 50 litres; filling weight: 10-5000g (change of dosing screws required); stainless steel version AISI 304; servo motor; packaging accuracy: 1-2% (depending on product and total weight); max. speed of the machine in neutral: 50/minute; current: 1.5kW, 3P, 380V; machine dimensions: L600xW800xH1000mm; weight: 100kg. The screw conveyor has a stainless steel AISI 304 body with stainless steel pipe. The feed hopper holds 230 litres and is equipped with a vibration motor for uniform product flow. - Specifications screw conveyor: Conveying capacity depending on product: up to 3 m³/h; standard angle: 45° (can be customized 30-60°); pipe diameter: 141mm; power: 1P, 380V, 3kW; machine dimensions: size depends on the customized end system (hopper, conveying length and angle can be adjusted); weight: approx. 150kg. The drawing just shows the auger filler. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nedpsgzp Eksfx Aaxokt

Condition: used, Year of construction: 2005, Overview  The palletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in German dairy company. The palletizer is now being released as the owner is sgutting down the production. Technical details/ scope Worked with tray/cartons of 8 units (4x2) Pallet loader With shutter head Incl. protective fences, pallet transport, tray transport, tray turner, formation table, empty pallet magazine Nkjdsxb Ar Aspfx Aaxjt